Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
Retrofit controller
Future fit power. It is a simple idea with tremendous effect: Replace your old first-generation Smartpack controller with the Smartpack R to make your power system ready for a high-speed, high-capacity, and connected tomorrow. This retrofit will bring your existing power system in line with current requirements, prolong its lifetime and thereby reduce both the lifetime operating costs and the need for
new investments in power.
KLife minimizes residue buildup and can extend the life and reduce the maintenance of your water softening system KLife minimizes brine tank clean out while softening water for your entire home or business KLife is a highly effective water conditioner that does not introduce salt into your water system
Potassium Chloride KLife
Product: Diesel Gasoil L-0.2-62 (gost 305-82)
Origin: Russian Federation
Moq Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract
Cif Price: Us$310.00 Gross / Us$300.00 Net Per Mt
Fob Price: Us$290.00 Gross / Us$280.00 Net Per Mt
Terms Of Transaction:
Loading Ports: Rotterdam / Turkmenistan / Primorsk / Vladivostok / Novorossiysk
Inspection: Sgs For The Quality & Quantity Test Report
Insurance: Paid By Seller, Covering 110% Of Shipment Value
Commission Per
Gallon
Seller / Buyer�??s Side - $0.02 Usd Per Gallon
Commission Per
Barrel
Seller / Buyer's Side - $4.00 Usd Per Barrel
Commission Per
Metric Ton
Seller / Buyer's Side - $10.00 Usd Per Metric Ton
Mark Up Or Over Price Not Allowed By The Refinery***
Freight On Board (fob) Transaction Procedure:
1. Buyer Accepts Seller's Procedure And Issues Irrevocable Corporate Purchase Order (icpo) With
Tank Storage Agreement (tsa If Absent Buyer Extends Seller's Tank Storage With Product For A
Minimum Of Five (5) Business Days), Banking Details, Company Registration And Valid Passport
Copy.
2. Seller Conducts Due Diligence On Buyer And Issues Commercial Invoice Agreement If Buyer
Is Approved. Buyer Signs Commercial Invoice And Returns To Seller For Countersigning And
Endorsement.
3. Seller Issues To Buyer The Below Partial Proof Of Product (ppop) Documents As Endorsed:
Refinery Commitment To Supply
Certificate Of Origin
Authorization To Sell (ats)
Confirmation Of Allocation
Product Quality Passport (analysis Test Report)
Company Registration Certificate
4. Buyer Requests For A Commitment Letter From Its Tank Storage Company To Be Signed By
Buyer's Tank Storage Company (if Absent Buyer Extends Seller's Tank Storage With Product For A
Minimum Of Five (5) Business Days), Buyer Then Return A Copy Of The Commitment Letter To Be
Signed And Confirmed By The Seller.
5. Seller Issues Buyer Unconditional Dip-test Authorization Letter To Enable Buyer Along With
Its Sgs Team Conduct Dip-test On Seller's Tanks With Its Terminal Access Permit And Clearance
To Come Into Its Tank Facilities To Conduct Its Dip Test And Confirm Product Quantity And
Quality.
6. Seller Issues Full Proof Of Product Documents:
Company Registration Certificate
Tank Storage Receipt
Fresh Sgs
Injection Report
Change Of Ownership Certificate
Authorization To Sell And Collect
Company Tax Payment Certificate
7. Signing Of Non-circumvention, Non-disclosure Agreement (ncnda)/irrevocable Master
Fee Protection Agreement (imfpa)-for Intermediary Fees Protection And Legalization By All
Intermediaries.
Product: Liquified Natural Gas (lng) Gost 5542-87
Origin: Russian Federation
Moq Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract
Cif Price: Us$260.00 Gross / Us$250.00 Net Per Mt
Fob Price: Us$240.00 Gross / Us$230.00 Net Per Mt
Terms Of Transaction:
Loading Ports: Rotterdam / Turkmenistan / Primorsk / Vladivostok / Novorossiysk
Inspection: Sgs For The Quality & Quantity Test Report
Insurance: Paid By Seller, Covering 110% Of Shipment Value
Commission Per
Gallon
Seller / Buyer's Side - $0.02 Usd Per Gallon
Commission Per
Barrel
Seller / Buyer's Side - $4.00 Usd Per Barrel
Commission Per
Metric Ton
Seller / Buyer's Side - $10.00 Usd Per Metric Ton
Mark Up Or Over Price Not Allowed By The Refinery***
Freight On Board (fob) Transaction Procedure:
1. Buyer Accepts Seller's Procedure And Issues Irrevocable Corporate Purchase Order (icpo) With Tank Storage Agreement (tsa . If Absent Buyer Extends Seller's Tank Storage With Product For A Minimum Of Five (5) Business Days), Banking Details, Company Registration And Valid Passport
Copy.
2. Seller Conducts Due Diligence On Buyer And Issues Commercial Invoice Agreement If Buyer
Is Approved. Buyer Signs Commercial Invoice And Returns To Seller For Countersigning And
Endorsement.
3. Seller Issues To Buyer The Below Partial Proof Of Product (ppop) Documents As Endorsed:
Refinery Commitment To Supply
Certificate Of Origin
Authorization To Sell (ats)
Confirmation Of Allocation
Product Quality Passport (analysis Test Report)
Company Registration Certificate
4. Buyer Requests For A Commitment Letter From Its Tank Storage Company To Be Signed By
Buyer's Tank Storage Company (if Absent Buyer Extends Seller's Tank Storage With Product For A
Minimum Of Five (5) Business Days), Buyer Then Return A Copy Of The Commitment Letter To Be
Signed And Confirmed By The Seller.
5. Seller Issues Buyer Unconditional Dip-test Authorization Letter To Enable Buyer Along With
Its Sgs Team Conduct Dip-test On Seller's Tanks With Its Terminal Access Permit And Clearance
To Come Into Its Tank Facilities To Conduct Its Dip Test And Confirm Product Quantity And
Quality.
6. Seller Issues Full Proof Of Product Documents:
Company Registration Certificate
Tank Storage Receipt
Fresh Sgs
Injection Report
Change Of Ownership Certificate
Authorization To Sell And Collect
Company Tax Payment Certificate
7. Signing Of Non-circumvention, Non-disclosure Agreement (ncnda)/irrevocable Master
Fee Protection Agreement (imfpa)-for Intermediary Fees Protection And Legalization By All Intermediaries.
Applications in these markets demand state-of-the-art, reliable, and safe DC power systems. Flatpack S delivers an industry-leading power density in its segment, many safety functions, a wide operating temperature range, and superb reliability in its small 217mm deep housing.
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.
Eltek Micropack System is convection cooled, designed for less power-hungry applications, but still with system functionality options to match any requirements. Use as stand-alone or in a flexible off-the-shelf configurable system.
Eltek Micropack Power System extends your network one step further. With load ranges typically between 120W and 1000W, and in 12V, 24V, and 48V options, the system is perfect for a great variety of applications.
The Micropack System is convection cooled, designed for less power-hungry applications, but still with system functionality options to match any requirements. Use as stand-alone or in a flexible off-the-shelf configurable system.
The Micropack Power System extends your network one step further. With load ranges typically between 120W and 1000W, and in 12, 24, and 48V options, the system is perfect for a great variety of applications.
Eltek Micropack 48V/250W Rectifier
Micropack Wallbox
Power Supply System 12V/480W, 24V/960W or 48V/1000W
Compact wall-mounted power supply system
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
Features:
1. Superb linear performance.
2. High output power with water-resist housing.
3. Designed for outdoor application.
4. Automatic gain control and manual gain control.
5. Easy installation & maintenance.
6. Extend cell phone battery life.
Power supply Ac:110~220v; 50/ 60 hz
Operating temperature -25¡æ~50¡æ
Environment conditions Ip65
Dimensions (d x w x h )453.6*357.8*159.7 mm
Weight ¡ü22kg
Compact in size, easy and direct operation, portable
Working modes: manual / auto / arrhythmia analysis
80mm, 3 channel format recording
Accurate automatic interpretation function
320*240 graphic 3.8 inch lcd screen
12 leads synchronously acquisition and display
20patient cases save and replay (extendable)
Adapt to 110-230v, 50/60hz power supply
Built-in rechargeable ni-mh battery
High resolution thermal printing
Usb/rs232 interface
98 Eltek Smartpack Extended 242100 110 Suppliers
Short on time? Let Eltek Smartpack Extended 242100 110 sellers contact you.
