Find Verified Drawing Dies Suppliers, Manufacturers and Wholesalers

Name s11 carbide (tungsten steel) wire drawing die, die-off lines, cable mold, molding die
Grade k10, k20 , yg6, yg6a, yg6x, yg8, yg8n
Usage for drawing ferrous and nonferrous metal wires
We specialize in the manufacture of tungsten carbide products such as tungsten carbide strips, tungsten carbide rings, tungsten carbide inserts, tungsten carbide indexable inserts shims, tungsten carbide indexable inserts, tungsten carbide wear parts, tungsten carbide drawing pellets, tungsten carbide drilling bits, tungsten carbide drawing dies, tungsten carbide cold forging dies, tungsten carbide bars, tungsten carbide rods, tungsten carbide balls, tungsten carbide burrs, and hardmetal customized products etc.
Tile cutters, also known as tile cutting wheels and tile blades are made of tungsten carbide. Customized products are also welcome.

Name Type S01
Grade k10, k20, YG6, YG6A, YG6X, YG8, YG8N
Usage Carbide Wire Drawing Dies for drawing metal wires and rods
We specialize in the manufacture of tungsten carbide products such as tungsten carbide strips, tungsten carbide rings, tungsten carbide inserts, tungsten carbide indexable inserts shims, tungsten carbide indexable inserts, tungsten carbide wear parts, tungsten carbide drawing pellets, tungsten carbide drilling bits, tungsten carbide drawing dies, tungsten carbide cold forging dies, tungsten carbide bars, tungsten carbide rods, tungsten carbide balls, tungsten carbide burrs, and hardmetal customized products.

Basic Info
Model: H7 PX26D cap
Milling Speed: High Speed
Progressive Die Design: 2D&3D
Place of Origin: Zhejiang,China
Trademark: Invitech
Transport Package: carton and pallet
Specification:
Height: 4.5±0.05mm

Outer Diameter: Φ15-0.07mm

Eccentricity: 0.7±0.05mm

Outgassing Test: passed

HS Code: 853990
Product Description
1. Product Name: H7 PX26D cap

2. Product Type: OSRAM H7 adaptor(hard glass)

3. Material: SUS 430

4. Usage: OSRAM H7 PX26D lamp



PRODUCTION PROCESS:


Drawing format: . Igs, . Step, . X_t, . Pdf, . Dwg, . Dxf
Mould life: 500000 shots
First trial time: 35 days after mould structure drawing confirmed.

Step Item Description
1 Quotation We offer you the stamping die and part quotation according to your details (drawing or sample,material,quantity,weight).
2 Order If our quotation is competitive,you will place the order.
3 Drawing design We design the mould structure drawing according to your product drawing or sample,then send to you for confirmation.
4 Mould making After your confirmation of our drawing,we begin to make the moulds,during manufacturing program,we send you mould building progress with pictures every week,for you to know our process.
5 First trial We will make the stamping die first trial on time, then send you samples for you to confirm.
6 Quality confirm You will confirm our stamping die quality according to sample. If you need to adjust the product structure,we can help you to change it further.


We design progressive die according to your product drawings, and introduce APQP through deep communication with you in the early stage of the project; Under the premise of ensuring product quality, maximize the utilization of raw materials and reduce costs; Full cross-departmental collaboration to conduct a comprehensive review of 3D mold drawings and output DFM; Mold parts are designed with quick release and are interchangeable, which greatly improves the service life of the mold; Using top mold material brands such as ASSAB, HITACHI, standard parts supplied by MISUMI; Advanced electronic, mechanical, optical and magnetic sensors for mold protection and part inspection.



More About Us

Website: www.invi-tech.com

Email: info@invi-tech.com url:http://www.invi-tech.com

PCD dies are ideal for long production runs and for drawing abrasive wire materials as they outlast TC, SSCD, and ND dies.
PCD dies to provide uniform hardness and extended wear resistance in all directions.

Specification: K01 K05 K10 K20 K30 K40
Application: wire drawing, steel drawing, etc.

Specification
PCD Drawing Dies What is a drawing die?

In metal pressure processing, the metal is forced through the die under the action of external force, so that the metal cross-sectional area is compressed and the required cross-sectional area shape and size are obtained. We call it a drawing die.


PCD Drawing Dies

PCD Drawing dies are ideal for long production runs and for drawing abrasive wire materials as they outlast TC, SSCD, and ND dies.
Polycrystalline diamond dies are available in various grain sizes, both in supported and unsupported configurations.
PCD dies to provide uniform hardness and extended wear resistance in all directions.

Wire drawing dies are commonly used to reduce the diameter of various ferrous and non-ferrous rods and wires. Applications include high, medium, and low voltage cables, automotive, medical wires, superconducting, bonding, and welding wires.

Advantages of PCD Drawing Dies
Long-lasting (outlasts TC and SSCD/ND dies)
Ideal for long production runs
Ideal for highly abrasive wire materials
The wire remains round, even with significant die-wear
Tailored to wire alloy

Features of PCD Drawing Dies
Usable with dry and wet draw
Available in any casing size
Various grain sizes are available
Dies available for high-temperature applications
Tight-tolerance dies available

custom all kinds of tungsten carbide wire drawing die, based on your drawing.

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.

1/ GENERAL INTRODUCTION OF TUNGSTEN CARBIDE DRAWING DIES:


Tungsten carbide wire drawing dies, wire coating dies, PCD dies for drawing use for drawing various ferrous and nonferrous wires
tungsten carbide dies
tungsten carbide drawing dies
tungsten carbide nibs
tungsten carbide wire guide dies
PCD dies

Both carbide dies nibs and finished products with steel case are supplied

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.

Hole size: 0.08mm--10mm
Case size: 25x12mm, 28x11mm, 30x15mm, 25x10mm, 24x10mm, etc.

Suitable for drawing platinum rhodium wire, gold wire, silver wire, copper, aluminum, molybdenum, nickel, tined, copper, tungsten, copper aluminum alloy and other nonferrous metal wire material.

Tolerance: +/-0.005---+/-0.1
Nib:pcd nib from usa ge, japan sumitomo, etc.

Products not listed maybe available by special order.We can also make according to customer's request size, drawing, etc.


By plastic bags then by carton box.

Name type s10
Grade k10 k20, yg6, yg6a, yg6x, yg8, yg8n
Usage carbide drawing die nibs for drawing ferrous and nonferrous metal wires.

We specialize in the manufacture of tungsten carbide products such as tungsten carbide strips, tungsten carbide rings, tungsten carbide inserts, tungsten carbide indexable inserts shims, tungsten carbide indexable inserts, tungsten carbide wear parts, tungsten carbide drawing pellets, tungsten carbide drilling bits, tungsten carbide drawing dies, tungsten carbide cold forging dies, tungsten carbide bars, tungsten carbide rods, tungsten carbide balls, tungsten carbide burrs, and hardmetal customized products etc.
Tile cutters, also known as tile cutting wheels and tile blades are made of tungsten carbide. Customized products are also welcome.

Grade density hardness t.R.S( mpa) application
Yg6 14.9 91.0 hra 2350
Yg8 14.7 89.5 hra 2350


All raw material are tested in terms of density, hardness and t.R.S before use.
There are strict inspection on process and final products.
Every batch of product can be traced

We are specilised in providing our customers with carbide drawing die for drawing metal wires, our products are with the good wear resistance, exellent polishing, samll adhesion, small friction coefficient and good corrosion resistance

Fibre carton

Tungsten Carbide Drawing Dies Used for wire,bar and tube.We produce various tungsten carbide drawing dies which are used to draw ferrous and non-ferrous products.

tungsten carbide drawing dies feature
stable and trustable quality;
made from 100% virgin raw material;
all products go through in-process and final inspection;
free online technical service available;

tungsten carbide drawing dies grades
GradeDensityHardnessT.R.S( Mpa)
YG614.991.0 HRA2350
YG814.789.5 HRA2350

Customer samples and drawings are also welcomed.

We have more than 10 years experience in manufacturing grades introduction for wire drawing dies products
Ex-factory is at least 30% cheaper than you own native
The quality conforms to the international ISO standards ,the service life of the product is long
The various types of products are in stock,the production cycle is short delivery time is within 4 days
Free samples can be provided
Small orders can be acceptable
We can make it according to your requirements or drawings.,OEM or ODM is acceptable.

Product Description
Tube drawing die is mainly used for drawing copper tube, steel tube and other pipe materials, usually use together with floating plug, tube drawing die control outer diameter size of tube, floating plug control inner diameter size of tube. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer !
we can also produce the following types S20 21 S22 23 30-31E.
Note: Other specification can be made upon customer's requirements.

We company can manufacture tungsten carbide drawing dies according customers' requirements.

Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires
Tungsten carbide dies
Tungsten carbide drawing dies
Tungsten carbide nibs
Tungsten carbide wire guide dies
Pcd dies

Both carbide dies nibs and finished products with steel case are supplied

We produce tungsten carbide drawing dies in various type such as R, W, S series, Grade YG6 and YG8, various sizes.

Ranges Start Form:
IN MM Range: 0.15mm to 12.00mm
IN S.W.G. Range : 38 S.W.G. to 7/0 S.W.G.