Find Verified Dissolution Tester Suppliers, Manufacturers and Wholesalers

Dissolution tester

Product Brands: ABC, ABC Alkaline.
Available Variants: AAA, AA, C, D, 9V

Product of Indonesia

Tester screw Driver with Neon Bulb, 125mm.

Function:

Microcomputer Vertical Tensile Strength Tester, Computer paper tensile testing machine is widely used in paper, paperboard and other non-metallic materials tensile strength, elongation, tensile energy absorption determination test occasions.

Function:

To test the oxygen transmission rate (OTR) of packaging materials, such as plastic film, composite film, coextrusion film, aluminum-plated film, aluminum foil, infusion bag,etc.Widely used in the industries of food, pharmaceuticals, personal care, household, electronics and so on.

Accuracy ¡¨¤¡ê¡§0.1%+50ms¡ê
Memory group/test step 50sets/40steps


290mm*100mm*415mm
14kg

Lx-c durometer meter applied to foam, sponge, shoe materials, such as durometer testing of materials with low hardness. This product is light hg/t2498-93 and other relevant standards.

1. Dial value: 0 ~100hc
2. Needle stroke: 2.5 mm
3. Measure range: 10 ~90hc
4. Needlepoint size: sr 2.5 mm
5. Dimension:115¡¡§¡é60¡¡§¡é25mm
6. Weight: 0.5 kg

Features:
* LCD display of 128 64 matrix is used.
* Hardness scales(HV ,HB,HRC,HRB,HRA,HS).
* RS232 interface and USB to PC
* Max 600 groups impact times:32¡«1 of data can be stored at internal.
* Back light display has been used to make convenient or the user in poor light.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Material of cast steel¡± is added HB values can be read out directly when D/DC impact device is used
to measure cast steel¡± workpiece.
* Power is two of AA battery. Continuous working period: approx. 100 h (no back light on).
* Software of PC can be installed according to the requirements of user. The function will be more powerful
to satisfy the more demands of quality control and management.

Roughness tester.

Dimension (LxWxH): 223*92*45mm
Weight (W/OBattery): 185g
Ambient Condition: below 30-80%RH (w/o condensation)
Battery: 6F-22 9V
Metal Test (Ref.Value): Steel pipe(Diameter¦Õ15) Test Depth 24mm
Voltage Test (Ref.Value): AC110V Depth 20mm AC220V Depth 20mm
Wood Test (Ref.Value): Wood Framing (up to 15mm).

Each item in one Double Blister
6 pcs / inner; 24 pcs/ctn
inner ctn size: 31.5*18.5*31.5cm
ctn size: 65.5*39.5*33cm
Gw/Nw: 9/8 Kgs.

1.1Product Introduction
Apva-401 is a special instrument for testing characteristic of ct; the tester can finish ct transformation ratio test, ct polarity test, volt-ampere feature curve drawing and ct error drawing. It has large output, high precision, stable performance and automatic testing.

1.2 Funtion
1 ct transformation ratio test
2 ct polarity test
3 ct volt-ampere feature curve measurement
4 ct ratio error measurement
5 error curve measurement
6 result print
7 unload data to pc
8 pc online test .

Ft-f1 fogging tester
Characteristics:
Determines auto's fogging characteristics precisely, guarantees automobiles driving safely.
Be applicable for the laboratory and works in low noise. Data test and analysis with professional software, convenient and prompt.
Bath temperature controlled by thermostat can be kept constant to 0.1ªc, creating precise testing conditions. Designs friendly and integrally, operates safely and conveniently.
World-famous brand elements with stable and reliable performance.
The strictly controlled constant thermostat can be used for the other experiments.
Conforms to din 75201, iso 6452, sae j1756.

A great scientific innovation must lead to a great technological breakthrough. Tck•w portable rope testers weigh only 1.8 kg, about 1/6~1/25 of the weight of conventional ndt testers. The sensitivity of tck•w sensors could reach 5v/mt, and about 700times higher than conventional sensors. The gap between sensor and wire rope is about 20-30mm which achieves non-contact inspection, it does not affected by grease, normal warped wire, and rope-running speed which shown that passing-through capacity is good. When an inspection is completed, tck•w rope testers are capable to display testing data, flaw graph, data table, and test report on lcd screen. After connected to a computer and printer, a formal test report could be printed, which provides scientific reference for users to use wire ropes more safely and replace wire rope more properly.
Key features
1. High inspection precision, strong resolution and stable performance: “weak magnetism sensor” technology invented uniquely by our company, its sensitivity is 700 times higher than traditional tester. The sensor has strong resolution, and can inspect quantitatively actual wire rope flaws under various working status.
2. Small volume and light weight: the weight of w portable flaw detector is less than 2kg, which is only 1/6—1/20 of similar products at home and abroad.
3. Easy operation: inspection system realizes intelligent “fool” operation; on-line lock or unlock only needs 1 second; it only needs one person to operate, and the operation is much easier than using a mobile phone.

leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard.
we have 3 different chambers 210*270mm 360*585mm 460*330mm.

Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.

Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.

Application
GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments.
Standards
YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012

-

Application
GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,.
Technical Indexes
1.Temperature Control:
Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)


-