Find Verified Diesel For Rail Engines Suppliers, Manufacturers and Wholesalers

HS Code 73021090
PRICE = US$ 250 CIF
ORIGIN: SOUTH AFRICA
MIN ORDER: 200 TONS
PACKAGE: CONTAINERS

Standard & Grade 100% Used Rail (R50-R65) with specifications as per mentioned below:.
CHEMICAL COMPOSITION:
C 0.54 0.82
Si 0.18 0.40
Mn 0.60 1.05
S 0.04 max
P 0.035 max
As 0.01 max of Mass share
Norms R-50 GOST-7173-75 and R-65 GOST-8165-75
R50 (51.67 KG/M) GOST 7173-75
R65 (64.72 KG/M) GOST 8165-75
These scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M
Gost-8165-75) According to Incoterm 2000. The Rails shall conform to ISRI CODE R50-R65
and will be Used Rail Steel Scrap- Standard section Rails. Materials will be, free from Mud,
Dust, Fluff, Non-Ferrous inclusion, excessive rust, and other impurities. Free from any substance and coatings any organic waste and other harmful substances. Dirt, Dust Rust fluff and other immunity not allowed.

Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
5. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
6. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
7. Equipped with fault setting module: manual fault set module.
Training courses
Function introduction of main components of diesel engine;
Demonstration of engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting.

Quick Details
Origin: Hebei, China
Brand Name: BJZY
Warranty: 1 year
Service: OEM customization
Category: Teaching
MOQ: 1 set
Packing: wooden box
Packaging And Delivery
wooden packaging
Delivery time: 15 to be negotiated
Product Description:
1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.
5. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
6. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.
7. Equipped with fault setting module: manual fault set module.
Training courses
Function introduction of main components of diesel engine;
Demonstration of engine running, starting, accelerating etc;
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting.

Supplying diesels fuel EN59010ppm, Jet A1, D6, D2 and Mazut

Diesel is a petroleum-based fuel widely used in transportation, power generation, agriculture, construction equipment, marine applications, and industrial machinery. EN590 10 PPM Diesel is an ultra-low sulfur diesel fuel that meets European quality standards, ensuring efficient engine performance and reduced emissions.


Advantages
High energy efficiency and fuel economy
Low sulfur content (10 PPM maximum) for cleaner combustion
Reduces engine wear and maintenance costs
Suitable for modern diesel engines and heavy machinery
Lower exhaust emissions compared to conventional diesel
Reliable performance in commercial and industrial applications
High cetane number for improved ignition and engine efficiency

Used rails are railway tracks that have reached the end of their service life and are removed from railway lines. These rails are commonly recycled as scrap steel or repurposed in construction, engineering, or industrial applications

Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.

SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................

Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc

Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..

Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.

Product origin : Russia and Non Russia

Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.

Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.

Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.

Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.

Heavy melting steel scrap from railway tracks, R50-R65

Available Grades:
R50
R65
Mixed Rails

Key Specifications:
Length: 1.5m max
Width: 500-1500mm
Thickness: 50-65kg/m

Diesel

Powering your journey with efficiency and reliability. Our premium diesel fuel is designed to optimize engine performance while minimizing emissions. With a blend engineered for maximum power output and fuel efficiency, it\'s the smart choice for drivers seeking both performance and environmental responsibility. Whether you\'re hitting the highway or navigating city streets, trust our diesel to keep your engine running smoothly mile after mile.

Diesel is a refined petroleum fuel widely used in transportation, industrial machinery, power generators, agricultural equipment, marine engines, and construction vehicles. It is known for its high energy efficiency, superior fuel economy, and strong engine performance under heavy-duty operations. Diesel fuel is produced through the fractional distillation of crude oil and is available in different grades depending on climatic conditions and industrial requirements.
WGT provides a full range of petroleum products to its client network. These are sourced directly from refineries it has forged a close relationship with and delivered to the client's chosen port of discharge.
10ppm, 50ppm & 500ppm Sulphur content

CIF delivery terms

FOB deliveries in Rotterdam, Houston, Fujairah & Jurong

Product Name : Diesel Fuel
Appearance : Clear to slightly amber liquid
Odor : Characteristic petroleum odor
Density @ 15C : 820 - 860 kg/m
Cetane Number : Minimum 45 - 51
Sulfur Content Ultra Low Sulfur Diesel (ULSD) available
Flash Point Minimum 52 C
Calorific Value Approx. : 42 - 46 MJ/kg
Viscosity : @ 40 C 2.0 - 4.5 cSt
Water Content : Minimal / as per standard
Ash Content : Very low
Pour Point : Depends on grade and climate
Applications : Vehicles, generators, industrial machinery, marine engines
Quality Standards : ASTM, EN 590, BIS or equivalent international standards

We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.

Ultra-low sulfur diesel compliant with European EN-590 standards for high efficiency and low emissions. Independently tested to ASTM specifications for reliable performance in modern diesel engines.

High-quality ultra-low sulfur diesel fuel meeting European standards, ensuring efficient combustion, reduced emissions, engine protection, and reliable performance for modern diesel engines.

Product Grade

Automotive Diesel / EN 590

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Automotive Diesel is a refined fuel designed for use in diesel-powered vehicles and transportation equipment. It is suitable for commercial vehicles, passenger vehicles, heavy-duty trucks, buses, and compatible diesel engines. The product can be supplied in bulk for international B2B requirements, subject to agreed specifications, quantity, availability, inspection, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

AUTO-DIESEL

Product Standards

EN 590 / Applicable Automotive Diesel Specification

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: As per applicable diesel fuel specification

Key Specifications 2

Cetane Number: As per agreed product specification

Key Specifications 3

Density, flash point, distillation characteristics, lubricity, and water content according to the applicable product specification.

Key Specifications 4

Suitable for passenger vehicles, commercial trucks, buses, heavy-duty vehicles, generators, and other compatible diesel engines.

Key Advantage 1

Suitable for a wide range of diesel-powered automotive and commercial applications.

Key Advantage 2

Designed to provide reliable fuel performance for transportation and heavy-duty operations.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk B2B supply with flexible quantity, delivery, inspection, and international shipping arrangements.

Engine Oils are high-performance lubricants specially formulated to protect, clean, and enhance the performance of internal combustion engines. They create a protective film between moving engine components, reducing friction, wear, and heat generation while helping to prevent corrosion and deposit buildup.
Key Specifications
Product Type: Engine Lubricating Oil
Base Oil Type: Mineral, Semi-Synthetic, Fully Synthetic
Viscosity Grades: SAE 0W-20, 5W-30, 10W-40, 15W-40, 20W-50, and others
Standards: API, ACEA, JASO, OEM Specifications
Applications: Automotive, Commercial Vehicles, Industrial Equipment, Generators, Marine Engines
Operating Temperature Range: Suitable for low and high-temperature conditions
Compatibility: Gasoline, Diesel, Turbocharged, and Heavy-Duty Engines
Additives: Anti-wear, Anti-oxidation, Detergent, Dispersant, and Corrosion Inhibitors

Marine Engines are specially designed propulsion and power-generation engines used in boats, ships, yachts, fishing vessels, ferries, offshore platforms, and other marine applications. Built to withstand harsh saltwater environments and continuous operation, marine engines deliver reliable performance, fuel efficiency, and durability even under demanding sea conditions.
Key Specifications
Product Type: Marine Propulsion and Auxiliary Engines
Fuel Type: Diesel, Gasoline, Natural Gas
Power Output: 10 HP to 10,000+ HP
Engine Configuration: Inline, V-Type, and Opposed Cylinder Designs
Number of Cylinders: 2 to 20 Cylinders
Cooling System: Freshwater-Cooled, Seawater-Cooled, or Heat Exchanger Systems
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Starting System: Electric or Hydraulic Start
Control System: Mechanical or Electronic Engine Management
Applications: Commercial Ships, Fishing Boats, Ferries, Tugboats, Yachts, Offshore Vessels, and Naval Craft
Compliance: IMO, EPA Marine, and International Emission Standards

Caterpillar Engines are high-performance diesel and natural gas engines engineered to deliver exceptional power, durability, and efficiency across a wide range of industrial applications
Key Specifications
Brand: Caterpillar (CAT)
Product Type: Diesel and Natural Gas Engines
Power Range: 25 HP to 8,000+ HP
Engine Configuration: Inline and V-Type Cylinders
Number of Cylinders: 3, 4, 6, 8, 12, 16, and 20 Cylinders
Displacement Range: 1.1L to 106L+
Cooling System: Water-Cooled
Fuel System: Electronic Fuel Injection / Mechanical Injection
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Emission Compliance: EPA, EU Stage, and other international standards
Applications: Construction, Mining, Marine, Power Generation, Agriculture, Oil & Gas, and Industrial Equipment

Cummins Engines are globally recognized for their exceptional reliability, durability, and performance across a wide range of industrial, commercial, marine, agricultural, mining, and power generation applications. Engineered with advanced technology and precision manufacturing, Cummins engines deliver outstanding power output, fuel efficiency, and operational dependability even in the most demanding environments.
Key Specifications
Engine Type: Diesel, Natural Gas, and Alternative Fuel Engines
Configuration: Inline 4-cylinder, 6-cylinder, and V-type engines
Power Range: 49 HP to 4,400 HP (depending on model)
Displacement: 2.8L to 95L+
Aspiration: Naturally Aspirated, Turbocharged, or Turbocharged Aftercooled
Cooling System: Water-cooled
Fuel System: Electronic or Mechanical Fuel Injection
Emission Standards: EPA, Euro, Tier, and IMO compliant models available
Speed Range: 1,500 RPM to 2,100 RPM and higher
Starting System: Electric Start
Applications: Generators, Trucks, Buses, Construction Equipment, Marine Vessels, Mining Equipment, Agricultural Machinery, and Industrial Systems
Control System: Electronic Engine Management (selected models)