Find Verified Daikin Neoflon Fep Np 101 Suppliers, Manufacturers and Wholesalers

NEOFLON FEP NP-Series

NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

NEOFLON FEP NP-Series

NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

Grades and Features of NP-Series
Grades MFR
(g/10 min.) Features
NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films.
NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket.
NP-101 21 - 27 Improved melt flowability.
Best suited for high-speed wire coating such as LAN cable.
NP-120 4 - 10 Stress crack resistance is improved from NP-20.
Wide range of applications, from thin-walled to thick-walled wire coating.
We can give discount according to order quantity.

NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

NEOFLON FEP NP-Series

NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

Grades and Features of NP-Series
Grades MFR
(g/10 min.) Features
NP-20 4.5 - 8.5 Suitable for general extrusion molding of wire coating, pipes, tubes and films.
NP-30 2.0 - 3.5 Suitable for thick-walled wire coating and wire jacket.
NP-101 21 - 27 Improved melt flowability.
Best suited for high-speed wire coating such as LAN cable.
NP-120 4 - 10 Stress crack resistance is improved from NP-20.
Wide range of applications, from thin-walled to thick-walled wire coating.
We can give discount according to order quantity.

NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.

NEOFLON ETFE is a copolymer of tetrafluoroethylene and ethylene, and has the lowest specific gravity among all fluoropolymers. It has superior characteristics in melt processability and mechanical properties compared with PTFE and FEP, and has good electrical and chemical properties. It is suitable for applications requiring its mechanical toughness, chemical resistance, heat resistance and electrical properties.

NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.

Introduction

- AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

- Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

- Excellent chemical resistance which is not affected by most of the chemicals.

- Excellent heat resistance. Continuous use temperature is 260 â??.

- It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

- Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

- It shows high electrical resistance and dielectric strength.

- Nonflammable like POLYFLON PTFE and NEOFLON FEP.

- Excellent weather resistance. No properties change even when exposed outside for a long time.

- Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.

NEOFLON ETFE EP-506 is a resin for extrusion of thin coatingsof small wire sizessuch as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc.. Itmay be used for injection molding of thin wall parts.
Ethylene tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest and toughest fluoroplastic. It not only maintains the good heat resistance, chemical resistance and electrical insulation properties of PTFE, but also greatly improves the radiation resistance and mechanical properties. The tensile strength can reach 50MPa, which is nearly twice that of polytetrafluoroethylene.

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.


Grades and Features of AP-Series
Grades MFR
(g/10 min.) Features
AP-201 20 - 30 Superior in melt flowability.
Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44).
AP-202 65 - 80 Excellent melt flowability.
Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52).
AP-210 10 - 17 Good melt flowability.
Suitable for injection molding.
AP-230 1.5 - 2.5 Superior in stress crack resistance.
Suitable for extrusion and transfer molding.
AP-201SH 20 - 30 High purity grade.
Superior in melt flowability.
Suitable for complex shape articles.
AP-211SH 10 - 17 High purity grade.
Long-term flexibility and good stress crack resistance.
Suitable for joints and parts for pumps.
AP-215SH 10 - 17 High purity grade.
Suitable for injection molding.
Suitable for joints and parts for pumps.
AP-231SH 1.5 - 2.5 High purity grade.
Long-term flexibility and good stress crack resistance.
Suitable for extrusion and transfer molding.
AP-210AS 11 - 14 Anti-static grade.
Suitable for injection molding.
AP-230AS 1.5 - 3.0 Anti-static grade.
Suitable for extrusion molding.
AP-230ASL 1.0 - 2.5 Anti-static grade.
Suitable for extrusion molding.

NEOFLON ETFE EP-506 is a resin for extrusion of thin coatingsof small wire sizessuch as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc.. Itmay be used for injection molding of thin wall parts.
Ethylene tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest and toughest fluoroplastic. It not only maintains the good heat resistance, chemical resistance and electrical insulation properties of PTFE, but also greatly improves the radiation resistance and mechanical properties. The tensile strength can reach 50MPa, which is nearly twice that of polytetrafluoroethylene.

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.

Our NPS cores are iron, silicon, and aluminium alloy distrubute.have good temperature stability,significantly lower loss than powder iron cores,good DC Bias performance, low magnetostriction, lower cost than MPP magnetic cores.
Specialty of product
Binding with inorganic only
Neither aging nor instability issue.
No noise
Customized service: We provide special products according to customer's requirements, like customized appearance or characteristic, especially high efficiency.
Serial/Model NO.: NPS157075
AL(nH/N2): 101
Perm(ª¦): 75
Bare Core OD(mm/inch): 39.88/1.570
Bare Core ID(mm/inch): 24.13/0.950
Bare Core HT(mm/inch): 14.48/0.570
Coated Core OD(mm/inch): 40.69/1.602
Coated Core ID(mm/inch): 23.32/0.918
Coated Core HT(mm/inch): 15.37/0.605
Magnetic Material: FeSiAl
CoreLoss: Medium
DCBias: Good
Curie Temp.: 600
Flux Density(G): 10000
Available OD Size: From 0.140inch to 3.063inch
Available Permeabilities:26 Tto 173ª¦
Advantages:
NPS and Sendust have the same performance.
but its cost is significantly lower than that of Sendust.
Core loss lower than 300MW/cm3.ú¿100Gauss,50KHzú¬
Wide range of permability:26--173 ª¦
Applications:
PFC chokes for server/PC
Switching regulator inductors
In-line noise filters
High Q filters
EMI filters
Output chockes for general
Characteristics:
Iron,silicon,and aluminium alloy distributed;
Good temperature stability;
Significantly lower loss than powder iron cores;
Good DC Bias performance;
Low magneticostriction;
Lower cost than MPP core

KS--A224K 8.9 Parameters
body all aluminum alloy structure
FEP membrane 0.15(janpan daikin)
Z Transmission 0.7N big torque motor
Print size 192*120*270mm(8.9 inch)
motor 42motor
bottom time 30-50s
guide double rail +T-Shaped
Exposure time 1-10S
screen 8.9 inch
Print layer thickness 0.1/0.05/0.025/0.01mm
resolution 3840*2400
Z axis positioning accuracy 0.01mm
voltage ï¼?AC220(110-240 50/60Hz) DC24Vï¼?built in powerï¼?
X Y Point distance 0.05MM
Display 3.5 inch touch screen
Z axis accuracy 0.025mm
connection method USB
Number of packages 1pcs
Light source UV LED100W 405mm)Taiwan epileds chip
weight 18kg
The intensity of uv 30w/m2
outer packing dimensions 620*450*420
power 100w
system CHITU box64
leveling automatic leveling

Proprerties:
Appearance : buff coloured powder
Bulk density : 0.9 gm/cc
Average particle size : 1 micron
Water solubility : 1 %
Specific gravity : 3.65 3.80
Chemical resistance : to acid
Specifications:
Tio2 content : 92 % (min)
Iron as fe2o3 : 4 %
Oil absorption phr : 30 %
Moisture content : 1 %
Loss on ignition : 1.00 %
Colour value : l : 80 (min) a : 4.0 (max) b : 18.0 (max)
Packing: material is packed in 25 kg capacity hdpe bags. Handling is to be done carefully to avoid generation of dust.
End users
Paint industry in all shades except pure white and a few bright shades.

Trichloroethylene chemical name / formula :
Trichloroethylene / c2hci3
Formation : liquid
Proprerties:
Appearance : colourless heavy liquid
Boiling pt / range : 86.7oc
Odour : chloroform like odour
Flash point : practically non-flammable
Flammability/explosive : no
Corrosive : no
Chemical stability : stable
Incompatibility : strong caustics
Specifications
Type-i
Type-ii
Relativity density at 27/27oc
1.452 to 1.458
1.447 to 1.458
Alkalinity (as na2co3)
0.005 to 0.020
0.0025 max.
Input
Calcium carbide and chorine
Distillation yield between 86 & 88oc
97-98 max.
97-98 max.
Residue on evaporation mg/100 ml
15 max
15 max
Free chlorine
Nil
Nil
Moisture ppm
200 (max)
200 (max)
Colour hazen
25 (max)
20 (max)
Packaging and handling
The material can be packed in m.S. Drums, hm hdpe barrels, tanker trucks, cans etc. For domestic and international marketing.
Packing: in metal digreassing, dry cleaning, drying electronic parts; as extraction solvent for oils, fats, waxes, refrigerant and as fumigant.