Customized Insulation Piercing Connector
Customized Flameproof Insulated Piercing Connector
Insulation Piercing Connector for Insulated Overhead Lines
1kV Insulation piercing grounding connectors (CONWELL type) selection table
Type (mm2)
Main Line
Section (mm2)
Branch Section Bolt Quantity
(pcs)
KWLW-1 5-120 35-70 1
KWLW-2 35-70 16-35 1
KWLB-1 16-95 16-95 1
KWLB-2 1
KWDM-1 16-120 4-35 1
KW4-150-2P 16-150 16-150 2
KW2-95B 16-95 4-50 2
KW4-150A 16-150 16-150 2
lation piercing connector(IPC)
1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td)
Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc.
Performance testing
1. Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997.
2. Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead.
3. Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting.
4. Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998.
5. Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing.
6. Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks.
7. Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other.
Max size :3300*12000mm
Main character :
Energy saving , improving the thermal performance
Sound insulated
Security and comfort
Component :
1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application
2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material .
Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed.
Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed
Da 2-95
Main line; 16-95sqmm
Branch line: 4-35/50sqmm.
mainline:insulated Cu or Al tap:insulated Cu or Al
1.Using corrosion-resistant shell, Anti-climate change, high-intensity ultraviolet insulation materials
2.Constant puncture fastening torque nut is installed more simple, safe, fast.
3.Extension puncture site and contact with senior waterproof cover functions (IP27), the water pressure of 6 KV
4.Extension Cover may as required under extreme left or right side.
This type insulation piercing connectors are suitable for all types of LV-ABC
conductors as well as connections to service and lighting cable cores.
When tightening the bolts, the teeth of the contact plates penetrate
the insulation and establish a perfect contact.
The bolts are tightened until the heads shear off.
Stripping of insulation is avoided. Suitable for aluminum and copper conductors and
components not losable, end cap attached to body, Insulation material made of
weather resistant glass fiber reinforced polymer,
contact teeth made of tinned brass or copper or aluminum,
bolt made of dacromet steel.
insulation piercing connector
1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td)
Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc.
Place of Origin Zhejiang, China Brand Name CROP
Model Number Insulation piercing connector Product name insulation piercing connector IPC connector
Sample Free Material Plastic
Company website www.cropgroupcn.com Quality Prime
Installation Quick Certifications ISO9001
OEM Acceptable Export All over the world
Business Type Manufacturer
Insulation Piercing Connector for Street Lighting
MODELS MAIN LINE
(MM2) SERVICE LINE
(MM2) BOLT NO. TORQUE REMARKS
PCT13C 95/10 6-95 1.5-10 1 10NM ISO to ISO
PCT13CB 95/10 (B)6-95 1.5-10 1 10NM ISO to Bare
PCT13C 120/10 6-120 1.5-10 1 10NM ISO to ISO
PCT13CB 120/10 (B)6-120 1.5-10 1 10NM ISO to Bare
Piercing Connector for Low Voltage Aerial Bundled Cables
MODELS MAIN LINE
(MM2) SERVICE LINE
(MM2) BOLT NO. TORQUE
(NM) REMARKS
PCT13C 70/35 16-70 4-35 1 15NM ISO to ISO
PCT13CB 70/35 16-70 (B)4-35 1 15NM ISO to Bare
PCT13C 95/50 16-95 4-50 1 17NM ISO to ISO
PCT13CB 95/50 16-95 (B)4-50 1 17NM ISO to Bare
PCT13C 120/25 25-120 6-25 1 17NM ISO to ISO
PCT13C 150/50 50-150 4-50 1 17NM ISO to ISO
PCT13C 185/35 50-185 6-35 1 17NM ISO to ISO
MODELS MAIN LINE
(MM2) SERVICE LINE
(MM2) BOLT NO. TORQUE
(NM) REMARKS
PCT13C 95/95 16-95 16-95 1 17-23NM ISO to ISO
PCT13CB 95/95 16-95 (B)16-95 1 23NM ISO to Bare
PCT13C 150/150 16-150 16-150 1 23NM ISO to ISO
PCT13CB 150/150 16-150 (B)16-150 1 23NM ISO to Bare
MODELS JBC-0 JBC-1 JBC-2 PCT23C 240-240
Main Line(mm2) 25-70 35-70 35-150 50-240
Service Line (mm2) 6-35 6-35 35-150 50-240
Bolt No. 1 1 1 2
Torque (Nm) 10NM 13NM 17NM 23NM
Remarks ISO to ISO ISO to ISO ISO to ISO ISO to ISO
1. Puncture strunctre, torque nut to ensure the puncture pressure and it's easy to fix.
2. Pressunized struncture, corrosion protection, and have a long service life.
3. Small contact resisance, and low termperature rise.
4. Different pathway wire connected, widely used.
5. Good insulation performance, 1kv withstand voltage is bigger than 4kv, 10kv withstand voltage is bigger than 18kv.
Place of Origin Hebei, China
Color -Black
Product name -Insulation Piercing Connectors
Model Number -TH,ipc,jbc,ttd
Teeth Material -Aluminium , Brass or Copper
Material -PA66
Connector type -Piercing clamp
Application -Power electric
Withstand Voltage -Low Voltage
Package -Package
Others -OEM Service Offered
Place of Origin -Hebei, China
Color -Black
Product name -Insulation Piercing Connectors
Model Number -TH,ipc,jbc,ttd
Teeth Material -Aluminium , Brass or Copper
Material -PA66
Connector type -Piercing clamp
Application -Power electric
Withstand Voltage -Low Voltage
Package -Package
Others -OEM Service Offered
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water
1 Has piercing structure, need not strip the connector over
2 Takes small installation space,easily installed
3 suitable for bridge,overhead line and underground
4 Can used in between below 50 degrees and 150 degrees
Materials
Body: Nylon 66
Teeth/blade : copper tinned
Bolt: Hot dip galvanized
Sheer head : Zinc alloy
Parameters
Piercing connector, simple installation, need not strip the cable coat.
Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al.
Small electric connecting resistance, impulse current can be up to 15ka.
Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv.
Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2)
Fire-retardant Insulation Piercing Connectors
Factory Direct Sales Plastic Fire-Retardant Insulation Piercing Connectors for ABC Cable
Electric Fire Retardant Insulation Piercing Connector Insulated Clamp
Electric Fire-Retardant Insulated Piercing Connector for ABC Cable
Fire-retardant Insulation Piercing Connectors(CONWELL Type) Selection table
Please phone us for special specification and type.
General of insulation piercing connector(IPC)
1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td)
Sali For Sale Piercing Connector, Metal Anchor Clamp, Insulation Piercing Connectors, Eye Bolt, Guy Attachment, Plastic Anchor Clamp etc.
It is suitable for 10kV overhead insulated wire grounding protection and temporary electrical inspection.
Type Equivalent
Type (kV)
Applicable
Voltage (mm2)
Applicable
Wire (mm)
Main Size (A)
Nominal
Current (æ??)
Bolt Quantity
(pcs) (mm)
Piercing
Depth
ABH
KWF10-240/150 JJCD10-150-240 10 150-240 160140112.5 476 2 4-5
KWF10-185/95 JJCD10-95-185 10 95-185 152140112.5 476 2 4-5
KWF10-95/25 JJCD10-95-25 10 25-95 144.514092.5 257 2 4-5
KWF10-120/35 10 35-120 14812086 316 2 3-4
KWF10-95/25 10 25-95 154120110 276 1 3-4
Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. Sali is a set research and development, manufacturing, sales and service in one, with international competition industry suppliers.
0.6-1KV Insulation Piercing Connectors
Sali supply Suspension Clamp, Pole Line Hardware, Eye Bolt, Pigtail Bolt, Insulator, Polymer Insulator, Orcelain insulator, Precing Connector, Preformed Guy Grip, Vibration Damper, Fastener etc. All of them with best quality and low price.
Sali For Sale Piercing Connector, Metal Anchor Clamp, Insulation Piercing Connectors, Eye Bolt, Guy Attachment, Plastic Anchor Clamp etc. We have strict quality inspection system, and professional after-sales service. If you have any question about our products, welcome to contact us.
