Mesh version
EH-MC10 Bluetooth low energy single mode module is a single mode device targeted for low power sensors and accessories. The module offer all Bluetooth low energy features: Radio, stack, profiles and application, so no external provides flexible hardware interfaces to connect sensors, simple user interfaces or even displays directly to the module.
The module can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries. In lowest power sleep mode it consumes only 600nA and will wake up in few hundred microseconds.
Key Features
Radio feature:
Bluetooth 4.0 low energy radio
Transmit power: +7.5 dBm
Receiver sensitivity: -92.5dBm
Integrated antenna
Software features:
Ehware's host protocol
Embedded Ehware's Bluetooth Smart Stack
Ehware's ATCMD for standalone applications
Ehware's profile toolkit for developing Bluetooth Smart profile
Bluetooth features:
Bluetooth Smart(low energy)support
L2CAP, ATT, GATT, GAP and Security
Bluetooth Smart Profiles
Slave and master mode
Up to 8 connections in master mode
100Kbps + throughput
Over-the-Air firmware upgrade
MCU features:
8051 microcontroller
256kB or 256kB Flash
Hardware features:
UART host inferface
SPI, I2C, PWM, UART, GPIO peripheral
10-bit ADC IOs
Temperature range: -30 to +80
Dimensions: 17.7*11.95*1.6 mm
Power supply: 1.8- 3.6V
U. FL port
Introduction:
Support bluetooth v4.0 low energy (ble 4.0) wireless standards.
Support slave and master mode operation.
Super low energy mode: 13.6ma rx current at 3v, 13.3ma tx current @0dbm at 3v.
Support multiple network protocols.
Support smart configure for network.
Support program’s remote upgrading.
Optional antenna: internal or external.
Support uart, pwm, gpio, ad and other interfaces.
Micro sizes: 12mm x 20mm x 3.5mm, smt.
Power supply: battery or 3.3v single supply.
Fcc certification.
Comply with rohs standard.
Access cloud platform for free.
Application:
Handheld devices
Personal medical
Internet of things
Wireless sensor & industrial control
Light control
The Module Is A Max.4Dbm( Class2 ) Module.
* Fully Qualified Bluetooth V2.0+Edr System.
* Integrated Switched-Mode Regulator.
* Integrated Battery Charger.
* Embedded Kalimba Dsp Co-Processor.
* Integrated 16-Bit Stereo Audio Codec
* 95Db Snr For Dac.
* Enhanced Audibility And Noise Cancellation.
* Integrated With 8M Bits Flash Memory.
* Support Host Interface: Usb Or Uart.
* Support Digital Audio Bus : Pcm, I2S Or Spdif.
* Hsp/Hfp/A2Dp/Avrcp Profiles Support.
* Rohs Compliant.
* Small Outline. 16 X 15 X 2 Mm.
* Applications
* High Quality Stereo Wireless Headsets.
* High Quality Mono Headsets.
* Hands-Free Car Kits.
* Wireless Speakers.
* Voip Handsets.
773 Csr Bluetooth Module Mesh Version Suppliers
Short on time? Let Csr Bluetooth Module Mesh Version sellers contact you.
Bluetooth ver. 2.0+edr certification
Transmit power up to +18dbm(class1)
Low current consumption:
Hold, sniff, park, deep sleep mode
3.0v to 3.6v operation
Full bluetooth data rate over uart and usb
Support up to 7 acl links and 3 sco links
Enhanced data rate(edr) compliant
For both 2mbps and 3mbps modulation modes
Interface: usb, uart&pcm( for voice codec)
Spp firmware with at commands
Rohs compliant
Small outline: 28.2 x 15.0 x 2.8 mm
Application:-
Access point
Domestics and industrial applications
Serial adapter
Gps, pos, barcode reader.
* Maximum of 4dbm (class2) module with antenna
* Bluetooth standard version 2.0 + edr compliant
* Low current consumption
* Hold, sniff, park, deep, and sleep mode
* 3.0v or 1.8 operation
* Supports for up to seven slaves: sco links (3), acl links and piconet (7)
* Interface: usb, uart and pcm (for voice codec)
* Hci or spp, hsp/hfp, hid and dun firmware is available
* For 802.11 co-existence
* Rohs compliant
* Small outline
Applications:
Pda, nb, and car kit
Presenter, mouse, and keyboard
Cordless headset, digital camera and printer
Access points
Gps, pos, and barcode reader
Data collector
Domestic and industrial applications.
Bluetooth standard v2.1+edr.
Integrated switched-mode regulator.
Integrated battery charger.
Embedded kalimba dsp co-processor.
Integrated 16-bit stereo audio codec
95db snr for dac.
Enhanced audibility and noise cancellation.
Integrated with 8m bits flash memory.
Support host interface: usb or uart.
Support digital audio bus : pcm, i2s or spdif.
Hsp/hfp/a2dp/avrcp profiles support.
Rohs compliant.
Small outline. 21 x 16 x 2 mm.
* Bluetooth standard Ver. 2.0 + EDR compliant.
* Low current consumption :
* Hold,Sniff,Park,Deep sleep Mode
* 3.0V or 1.8V operation
* Support for up to seven slaves :
* SCO links<3>,ACL links,Piconet<7>
* Interface: USB,UART&PCM(for voice CODEC)
* HCI or SPP,HSP/HFP,HID,DUN firmware is available
* Support for 802.11 Co-Exsitence
* RoHS compliant
* Small outline. 14 x 12 x 2.2 mm
Applications:-
* PDA,NB, Car Kit
* Presenter, Mouse, Keyboard
* for Cordless headset
* Digital camera & printer
* Access Points
* GPS,POS, Barcode Reader
* Data collector
* Domestic and industrial applications.
The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects.
Model No.: TS-M1021
Features
Bluetooth Version: BLE 5.1
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+10dBm
Receive Sensitivity: -97dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 100m
Memory: 512KB FLASH+56KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 2.0~3.6V
Operating Temperature: -40~+85
Peripheral Interface: UART/I2C/ADC
Serial Transparent Transmission Rate: BLE 20KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
Range :transmission Distance Indoors As Far As 50 Meters As Far As 150 Meters (environmental Factors Influence) Outdoor 100-200m ( Theoretical Value)
Frequency:working Frequency 2.4 ~ 2.4835 Ghz
Consumption:ultra-low Power Consumption, 3.3vdc Operating Voltage
Antenna :external Antenna
Operation System :supports Windows 2000 / Xp/vista/windows 7 / Win Ce/linux/mac Os/android Operating System
Certification :comply Rohs, Reach Ce, Fcc Approved
Other:wifi+bt
Chipset:rtl8821as
Wifi standard:compatible with ieee 802.11b/g/n standard
Encrypted:support 64/128/152bit wep and wpa encrypted data, wpa2-psk wpa, wpa2 / wpa2 wpa2-psk
Interface:sdio interface, built-in wireless roaming (roaming) technology
Working mode:provide centralized control (infrastructure) and equation (ad hoc) working mode
Transmission rate:11b: 1/2/5.5/11mbps(dynamic) , 11g: 6/9/12/18/24/36/48/54mbps(dynamic) , 11n: the highest data rate can reach to 300mbps
Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value)
Frequency:working double frequency 2.4 ~ 5.8 ghz
Consumption:ultra-low power consumption, 3.3vdc operating voltage
Antenna :external antenna
Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system
Certification :comply rohs, reach ce, fcc approved
Other:1t1r, wifi+bt
Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value)
Frequency:working frequency 2.4 ~ 2.4835 ghz
Consumption:ultra-low power consumption, 3.3vdc operating voltage
Antenna :external antenna
Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system
Certification :comply rohs, reach ce, fcc approved
Other:wifi+bt
Product Name :Dehydrated White Onion Granules
HS Code : 07122000
Category : White, Pink, Red
Packaging Options : 10/12/14 Kgs PP Bag/Cartoon Box or Customized
Loading Option : 7.5 MTS (20 FT), 16 MTS (40FT)
Aroma : sweet and spicy
Size : 0.5 to 1 mm / 0.2 to 0.5 mm
Product Expiry 2 Years in 5C - 12C Storage at Dry Place
Source / Origin : India
The Dehydrated onion granule is a finer version of onion flakes, mainly used to dressing or garnishing the salads and prepared dishes to add the sweetish and nutty onion flavor. The onion granules are mostly utilized for a heightened taste of fruit salads, snacks, momos, and hot fast foods. It is also applied to baked or roasted food items and spicy soups for a pungent aromatic flavor of onion.
In many food items such as baked foods and soups, the large-sized onion flakes may not be suitable. Therefore, some finer alternatives are also provided, such as the chopped, minced, granular, and powdered form of dehydrated onion flakes. Among these, the onion granules are produced from the dry onion flakes. Here, the unwanted matters like plant roots and outer skin from the onion flakes are separated by the sorting process. Hence, the final dehydrated onion product is free from these impurities and is of the best possible quality. In the next step, it is further processed through the cutting machine. Lastly, it is processed through the Vibro table of 24-40 mesh, 40-60 mesh, and 40-80 mesh size. Hence, three different sized dehydrated onion granules are produced as segregated by respective sized nets. These onion granules can also be manufactured by further processing the remains or byproducts of the chopped and minced dehydrated onions, which are also, in turn, produced from dry onion flakes.
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers.
Model No.: TS-M1020D
Features
Bluetooth Version: BLE 4.2+SPP 3.0
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+4dBm
Receive Sensitivity: -95dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 80m
Memory: 256KB FLASH+128KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 3.1~4.35V
Operating Temperature: -20 ~+85
Peripheral Interface: UART/SPI/I2C/ADC
Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
1. Product introduction
kbj-152n
bluetooth version: 4.0
the supported devices:bluetooth mobile phones, bluetooth speakers, bluetooth pc and other bluetooth devices
the maximum work range:33 feet (10 meters)
battery capacity: 160mah
music play /talk time: around 7~9 hours
charging time: around 3 hours
charging voltage: dc 5v
frequency response:2.402ghz~2.480ghz
2. Other information
moq: 3k
trade term: fob shenzhen
comply with rohs ce fcc standard
delivery time: 30-40 days once the order is confirmed
Color box + blister tray + manual;
Customized packing is acceptable!
Bluetooth wearable devices manufacturer in shenzhen china, strong r&d team on hardware, firmware, software, supply oem/odm services.Welcome to contact us at anna at vicro dot cn
Product name:bluetooth display fitness pedometer
App: available on apple app store/google play.
blet along
- built-in st g-sensor to detect user's body movements, transfer to steps and distances
- built-in rechargeable 50mah lithium battery, support charging
EH-MA41 is a class 2 Bluetooth® 2.1+EDR (Enhanced Data Rates) module. It is a highly integrated and sophisticated module which contains all the necessary elements from radio to antenna and a fully implemented protocol stack. It is an ideal solution for integrating Bluetooth® Into various products with limited knowledge of Bluetooth® And RF technologies.
With Ehware's AT command stack firmware, designers can easily customize their applications to support different Bluetooth profiles, such as SPP, HID, HFP and iAP etc.
773 Csr Bluetooth Module Mesh Version Suppliers
Short on time? Let Csr Bluetooth Module Mesh Version sellers contact you.
