Find Verified Cnc Pipe Threading Lathe China Suppliers, Manufacturers and Wholesalers

CNC Lathe Machine
CNC Pipe Threading Lathe China
The main performance characteristicsï¼?
Big spindle bore and double chuck allows clamp and process big diameter pipes;Integral machine bed adopts high strength iron to relize high rigidity and precision;Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;Carriage and guide way contact surface pasted with Turcite B to maintain long-term accuracy.
 More information you can views here

Application:
QK1313 CNC Heavy Duty Oil Pipe threading lathe machine is mainly designed to process all kinds of  internal and external pipe threads including metric,inch,module,DP and taper threads,as well as having all the common functions of normal CNC lathe such as processing the inner bore and end face of shafts and disks.This series lathe machine is widely used in industries including petroleum exploiting,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard Accessories:
Fanuc CNCsystem,NC turret 4 position,Coolant system,Lubrication system,Lighting system,Mobilehand-wheel,Semi-shield,Manual tailstock,Chuck,Rear support bracket, Pad iron etc.
Optional Accessories:
CNC system(Simens,Fagor,GSK,KND),Turret(Servo,hydraulic,power),Chip conveyor,Air conditioner,Full-shield,Hydraulic tailstock,Chuck,Center rest,Follower rest,Signal light,Grinding attachment etc.
Product main technical parameters:
ITEMS UNIT QK1313
Capacity Swing over bed mm Ã?630/800
Swing over cross slide mm Ã?340/540
Distance between centers mm 1000/1500 / 3000
Pipe threading range mm Ã?30-126
Width of bed way mm 550
Max.load capacity T 3
Spindle Spindle bore mm Ã?130
Spindle speed steps - stepless
Spindle speed range rpm 0-600
Chuck size mm Ã?400

CNC Lathe Machine
CNC Pipe Threading Lathe China
The main performance characteristics
Big spindle bore and double chuck allows clamp and process big diameter pipes;Integral machine bed adopts high strength iron to relize high rigidity and precision;Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;Carriage and guide way contact surface pasted with Turcite B to maintain long-term accuracy.
 More information you can views here

Application:
QK1313 CNC Heavy Duty Oil Pipe threading lathe machine is mainly designed to process all kinds of  internal and external pipe threads including metric,inch,module,DP and taper threads,as well as having all the common functions of normal CNC lathe such as processing the inner bore and end face of shafts and disks.This series lathe machine is widely used in industries including petroleum exploiting,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard Accessories:
Fanuc CNCsystem,NC turret 4 position,Coolant system,Lubrication system,Lighting system,Mobilehand-wheel,Semi-shield,Manual tailstock,Chuck,Rear support bracket, Pad iron etc.
Optional Accessories:
CNC system(Simens,Fagor,GSK,KND),Turret(Servo,hydraulic,power),Chip conveyor,Air conditioner,Full-shield,Hydraulic tailstock,Chuck,Center rest,Follower rest,Signal light,Grinding attachment etc.
Product main technical parameters:
ITEMSUNITQK1313
CapacitySwing over bedmm630/800
Swing over cross slidemm340/540
Distance between centersmm1000/1500 / 3000
Pipe threading rangemm30-126
Width of bed waymm550
Max.load capacityT3
SpindleSpindle boremm130
Spindle speed steps-stepless
Spindle speed rangerpm0-600
Chuck sizemm400

CNC system Standard: GSK 980TDC;Optional: Siemens 808D;
Max swing diameter over bed 1000mm;
Max swing diameter over cross slide 610mm;
Max distance between centers 1500mm;
Chuck form & diameter Electric 4-jaw chuck K66-780;
Width of bed 755;
Spindle bore 360;
Clamping range 150-350mm;
Power of spindle motor 22(Shanghai);

Quick Details
Type:
Horizontal
Condition:
New
Max. Swing Diameter (mm):
370
Max. Length of Workpiece (mm):
1500
Place of Origin:
Shandong, China
Dimension(L*W*H):
3657*1755*1880 mm
Brand Name:
HAISEN
Model Number:
QK1322
Voltage:
380V
Certification:
CE, ISO
Weight (KG):
5200
Warranty:
1 year
After-sales Service Provided:
Online support, Video technical support, Free spare parts, Engineers available to service machinery overseas
Key Selling Points:
Low Maintenance Cost
Applicable Industries:
Hotels, Garment Shops, Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
Swing over carriage:
380mm
Spindle bore:
225mm
Exported Countries:
USA, Russia, UAE etc
Bed Type:
Flat Bed
Machine Bed:
Overall Structure
Machining Precision:
IT6-IT7
Roughness:
Ra1.6 μm
Automatic:
Optional Automatc Feeding Device
CNC or Not:
CNC
Automatic Grade:
Automatic
Power (kW):
11
Supply Ability
Supply Ability:
30 Set/Sets per Month
Packaging & Delivery
Packaging Details
exporting package standard for machine
Port
Qingdao Port

Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk

We supply various types of UPVC pipe fittings including welded fittings there are two kinds of welded and nonwelded socket welded and threaded fittings flange fittings

Ball valve straight pipe straight elbow forward Tee pipe clamp abnormal straight reducing elbow cross loose jointpipe cap copper inner wire straight copper inner wire Tee outer wire direct head loose joint direct head loose elbow

double loose ball valve 45 elbow reducing ring external thread plug flange copper inner wire elbow quick joint Y filter glue

1 Fittings used for connecting pipes are flange loose joint pipe hoop clamp sleeve throat hoop etc
2 Fittings change the direction of the pipe elbow bend pipe
3 Fittings change the diameter of the pipe reducing diameter reducing pipe reducing elbow branch pipe reinforcing pipe
4 Fittings increase the pipe branch tee crossing
5 Fittings for pipe sealing gasket raw material belt thread flange blind plate pipe plug blind plate head welding plug
6 Fittings for pipe fixing clamp ring tow hook hanging ring bracket bracket pipe clamp etc

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.

According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.

According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

We deals Galvanized Steel Pipes used for Agriculture and Irrigations, Water Pipeline, Road Barriers. In addition to round pipes, we can also supply galvanized pipes in square and rectangular sections.Hot Dip Galvanized pipes in sizes from 1/2" To 6 OD and in wall thickness ranging from 1MM to 6MM. Our company is specializing in the galvanized pipes, welded pipes and other pipes. Surface hot dipped galvanized, Pre-gavanized, electro galvanized, painted, threaded, beveled, grooved, engraved Usage Scaffolding pipe, Structure pipe, Fence/Door pipe, Furniture, Lowpressure fluid pipe for water oil or gas, Boiler pipe.

We deals in the following products of India, China, Taiwan and Korea Origin:-
Black Steel Pipes

We deals in the following products of India, China, Taiwan and Korea Origin:-
ERW Steel Pipes

We deals in the following products of India, China, Taiwan and Korea Origin:-
Stainless Steel Pipes

We deals in the following products of India, China, Taiwan and Korea Origin:-
1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.)
2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.)
3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.)
5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless)
6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7) Heavy Duty Props & Light Duty Props.
8) Nuts, Bolts, Nails & Fasteners
9) System Scaffolding, Base Plate & Adjustable Base.
10) Steel Tie Rod, Waller Plates and Wing Nuts.
11) Drop Forged and Pressed Sheet Metal Couplers of all types.
12) Steel Billets, Steel Angle & Steel Channels.


Price: After receiving complete details

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

We deals in the following products of India, China, Taiwan and Korea Origin:-
1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.)
2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.)
3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.)
5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless)
6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7) Heavy Duty Props & Light Duty Props.
8) Nuts, Bolts, Nails & Fasteners
9) System Scaffolding, Base Plate & Adjustable Base.
10) Steel Tie Rod, Waller Plates and Wing Nuts.
11) Drop Forged and Pressed Sheet Metal Couplers of all types.
12) Steel Billets, Steel Angle & Steel Channels.


Price: After receiving complete details

China CNC Vertical Lathe:
China vertical lathe manufacturer
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable.
8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:

China CNC Vertical Lathe:
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric ro sion gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:

China CNC Vertical Lathe:
Vertical Lathe Factory In China
1.The super-high quality and mass remarkably surpass the domestic first-class factories.
2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years.
3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one.
4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it)
5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported)
6.The electrics adopt Japan O mron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability.
7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable.
8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation.
9.JB/T4116-96 precision test standard of vertical lathe is performed
JB/3665-96 technical condition of vertical lathe is performed.
10.Advanced and perfect processing and assembly process forge excellent quality.
11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted.
12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
More CNC Vertical Lathe:

Flat Bed CNC Lathe Machine
CNC Horizontal Lathe Factory China
Featuresï¼?
Four position electric turret
Frequency conversion stepless speed regulation
Standard configuration :manual chuck
Optional configuration:spring collet ,hydraulic chuck ,automatic feeding device ,gang type tools
Applicationï¼?
Machine can automatically process the inside and outside cylinder surface ,cone surface ,circular arc surface ,end face ,such as processing ,and also can process the single and multile threads in metric ,inch and other standards .
Product main technical Specifications:
Specifications Unit CK6140V
Max.swing over bed mm Φ400
Max.swing over cross slide mm Ф240
X/Z axis travel mm 280/750
Spindle nose A2-6
Spindle bore Ф48/82
Bar capacity Φ41/65
Spindle speed Ф48
Spindle speed rpm 150-2000/150-1800
Chuck size mm 200/250
Spindle motor KW 5.5/7.5
X/Z axis repeatability mm ±0.005
X/Z axis feed motor torque N.m 4/6
X/Z axis rapid traverse m/min 8/10
Tailstock sleeve dia. mm Ф60
Tailstock sleeve travel mm 100
Tailstock sleeve taper # MT4
Tool post type 4 station electtic tool post
Cutting tool shape size mm 20x20
Guide form Double Mountain Guide
Total power capacity KVA 11
Machine dimension(LÃ?WÃ?Hï¼? mm 2200X1160X1620
N.W. kg 1800