Cationic polyacrylamide (cpam)
Introduction
This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid.
Specification
Product:pam
Solid content:min. 88%
Ionicity:cationic
Appearancewhite fine-sand shaped powder
Molecular weight:6million-10million
Ion concentration:20%30%40%50%-80%
Shelf life:24 months
Application
1.This product is mainly used for the sludge dewatering to decrease moisture content of sludge.
2.This product is used in the treatment of industrial wastewater and municipal wastewater.
3.This product can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Application method
1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60.
Package and storage
Packed in 25kgs woven bag with polypropylene.
This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.
It is suitable for wastewater treatment with high organic colloid content in industries such as printing and dyeing, papermaking, food, construction, metallurgy, mineral processing, coal dust, oil field, aquatic processing, aquaculture, fermentation, etc.Ã?Â
It is especially suitable for dewatering industrial sludge such as urban sewage, municipal sludge and paper sludge.Â
Application:Â The product is widely used in the treatment of chemical industry wastewater, waste liquid and urban sewage treatment, sludge dewatering.
It is suitable for wastewater treatment with high organic colloid content in industries such as printing and dyeing, papermaking, food, construction, metallurgy, mineral processing, coal dust, oil field, aquatic processing, aquaculture, fermentation, etc.Ã?Â
It is especially suitable for dewatering industrial sludge such as urban sewage, municipal sludge and paper sludge.Ã?Â
Application:� The product is widely used in the treatment of chemical industry wastewater, waste liquid and urban sewage treatment, sludge dewatering.
Cationic polyacrylamide (CPAM) produced by Xinhuan Water Treatment is a linear polymer compound, which can form hydrogen bond with many substances by affinity and adsorption due to its various active groups.
It is mainly used to flocculate negatively charged colloids, and is suitable for the treatment of wastewater rich in organic matter.
It is suitable for wastewater treatment with high organic colloid content in industries such as printing and dyeing, papermaking, food, construction, metallurgy, mineral processing, coal dust, oil field, aquatic processing, aquaculture, fermentation, etc.
It is especially suitable for dewatering industrial sludge such as urban sewage, municipal sludge and paper sludge.
Application: The product is widely used in the treatment of chemical industry wastewater, waste liquid and urban sewage treatment, sludge dewatering.
1782 Cationic Polyacrylamide (Cpam) Suppliers
Short on time? Let Cationic Polyacrylamide (Cpam) sellers contact you.
Introduction
CAS9003-05-08 Purity90%
Molecular formula(C3H5NO)n EINECS231-545-4
Appearance Granule Colour White
Function Waste Water Treatment, Sewage treatment, Sludge dewatering
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels.
Polyacrylamide (PAM) produced by Xinhuan is a water-soluble polymer, insoluble in most organic solvents, with good flocculation effect. According to the different ionic properties, it can be divided into three major types: anionic, cationic and nonionic. In neutral alkaline media, it is characterised by polymer electrolytes, sensitive to salt electrolytes, and crosslinked with high-valent metal ions to form insoluble gels.
Quick Details :
Classification: Chemical Auxiliary Agent
CAS No.: 9003-05-8 Other Names:
PAM MF: C5H5NO)n
EINECS No.: 45-784-56
Purity: 98%
Place of Origin: Henan China (Mainland)
Type: wate treatment
Usage: leather auxiliary agents, paper chemical.
Brand Name:CHENGHUI
Model Number: 01
Color: white powder/granule
Packaging & Delivery:
Packaging Detail: 25Kg Delivery Detail: 10 days
Specifications :
APAM-Anionic Polyacrylamide, Water Treatment Chemical. It is white powder, has good water solubility. APAM-Anionic Polyacrylamide, Water Treatment Chemical
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 95%
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6)Dissolving time: 2 hours maximum (10C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Use:
(1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..
(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.
(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.
(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.
(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.
It is suitable for wastewater treatment with high organic colloid content in industries such as printing and dyeing, papermaking, food, construction, metallurgy, mineral processing, coal dust, oil field, aquatic processing, aquaculture, fermentation, etc.
It is especially suitable for dewatering industrial sludge such as urban sewage, municipal sludge and paper sludge.
Application: The product is widely used in the treatment of chemical industry wastewater, waste liquid and urban sewage treatment, sludge dewatering.
Year-end discounts are coming, come and place your order
Polyacrylamide is a synthetic polymer composed of acrylamide monomers and is widely used in various industrial, environmental, and scientific applications. It comes in various forms, including powder, liquid, and gel. In water treatment, polyacrylamide is employed as a flocculant and coagulant to separate and remove suspended particles and impurities, aiding in the purification of drinking water and wastewater treatment. Additionally, it plays a crucial role in the petroleum industry for enhanced oil recovery and in agriculture for soil conditioning and erosion control. In the laboratory, it serves as a gel for electrophoresis in DNA and protein analysis. Its versatility in facilitating solid-liquid separation and its ability to modify the rheological properties of fluids make polyacrylamide a valuable polymer in a range of practical applications.
Polyacrylamide(PAM) is water soluble polymer chemical, has unique effect to increase the viscosity of water or to promote the flocculation of particles present in water, it can also reduce the frictional resistance between the liquid.
According to the different ion characteristics, PAM has three types: Anionic PAM, Cationic PAM and Nonionic PAM.
Polyacrylamide(PAM) is widely used in many fields like Water Treatment, Oil Exploration, Sludge Dewatering, Paper Making, Textile, Sugar Making, Coal washing and Incense Making, etc.
Polyacrylamide
CAS No.9003-05-8
Purity: 90%
Synonyms: PAM
Molecular Formula:C3H5NO
Formula Weight:71.0779
Package: 25kg/bag
Specifications
1.Polyacrylamide/PAM
2.CAS NO.:9003-05-8
3.Purity: 90%
4. Appearance: white granule
5. Molecular weight: 5 -22 million min
6.MF: C3H5NO
Polyacrylamide called PAM,commonly known as focculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 milion,the product appearance is white or slightly yellow powder, soluble in water. In paricular, acidic water, acid and organic mater and the red mud suspension turbidiy from focculation sedimentalion and separaion of the role ofliquid mud,use less, water and low cost, flocculant can not be replaced by other products
Features of PAM:
1)Molecular weight: 5 -22 million min
2)Granule:20 -100 mesh
3) Solid content: 88% min
4)Hydrolyzing degree:10-20%,20-30% or 30-40%5)Dissolving time: 2 hours max (10�°C)
polyacrylamide, also known as Polyelectrolytes ,,flocculant,abbreviated as PAM in English.It is an efficient flocculant with good water solubility and strong adsorption capacity, which can quickly clarify water quality and promote sludge settling. It is widely used in various fields such as water treatment.
Anionic polyacrylamide is a water-soluble synthetic polymer with negatively charged functional groups, widely used in industries and environmental applications. Its main role is as a flocculant and coagulant in water treatment processes, where it aids in the aggregation and settling of suspended particles, impurities, and solids, facilitating their removal and purification from water sources. Beyond water treatment, anionic polyacrylamide has applications in enhanced oil recovery in the petroleum industry, soil conditioning for agriculture, and enhancing particle retention and drainage in the paper and textile industries. Its versatility in improving solid-liquid separation and reducing environmental contamination makes it a critical component in various industrial and environmental processes.
-- Product Name: Polyacrylamide (PAM)
CAS No.: 9003-05-8
Molecular Weight: 5-25 million (customizable)
Ionic Type: Anionic / Cationic / Nonionic / Amphoteric
Appearance: White/off-white granules or powder
-- Product Overview
Polyacrylamide (PAM) is a water-soluble polymer widely used as a flocculant, coagulant aid, thickener, and drag reducer. Available in anionic, cationic, nonionic, and amphoteric forms, it is suitable for various industries including municipal and industrial wastewater treatment, mining, oilfield EOR, papermaking, and textiles.
-- Main Applications
Municipal & Industrial Wastewater Treatment
As a flocculant to clarify sewage, remove solids, and aid sludge dewatering.
Oilfield & Drilling
In enhanced oil recovery (EOR), fracturing fluid thickening, and drilling mud stabilization.
Mining & Mineral Processing
Used for tailing treatment, sedimentation, and ore separation.
Papermaking Industry
For retention, drainage, and improving paper quality.
Textile & Chemical Industry
For wastewater clarification and process water recycling.
-- Key Benefits
High Flocculation Efficiency: Rapid settling of suspended solids.
Wide pH Compatibility: Effective under acidic or alkaline conditions.
Low Dosage Required: Economical in long-term operation.
Customizable Grades: Ionic types and molecular weight tailored to your process.
Improves Sludge Dewatering: Lowers moisture content, reduces disposal cost.
-- Packaging & Storage
Powder: 25kg PE-lined kraft paper bag or woven bag
Store in cool, dry, and ventilated area, away from moisture and sunlight
Shelf life:2 years
-- Delivery & Logistics
Non-hazardous, suitable for sea, land, and air transport
Lead Time: 5-10 working days
OEM branding & custom particle size available
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree.
Use characteristics
1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption.
2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role.
3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%.
4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4.
For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required.
Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption.
The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution.
The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required.
SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes.
SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press.
SIZEOMNI 40S is low foaming, so defoamers are normally not required.
Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.
Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
1782 Cationic Polyacrylamide (Cpam) Suppliers
Short on time? Let Cationic Polyacrylamide (Cpam) sellers contact you.
