Find Verified Carbon Dioxide Absorber Suppliers, Manufacturers and Wholesalers

Minstrong CO2 Absorber has two types, one is soda lime, the other is cacium lime. Minstrong can provide the suitalbe CO2 absorber as your working condition and request.



Name:Soda lime

CAS:8006-28-8

Molecular formula:CaHNaO2

Molecular Weight:96.07

Application: Used as CO2 Absorber in Medical, military, diving, mining and safety



CO2 absorber can also be used as a desiccant (calcium oxide acts as a desiccant), which can be used to dry neutral gases such as oxygen, and can also be used to dry alkaline gases such as ammonia. At the same time, it can also be used to absorb acid gases, such as carbon dioxide and sulfur dioxide. If only sodium hydroxide is present, this desiccant cannot be used at higher temperatures, because sodium hydroxide can react with the most commonly used glass instruments in the laboratory (the main component is silica) and corrode the instruments. A small amount of methane produced in the laboratory can be co-heated with soda lime and sodium acetate (sodium acetate) to generate sodium carbonate and methane.

Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.

Parameters-
Total moisture (Mt): 1.80%
Ash(Aad): 13.07
Volatile matter (Vad): 13.94
Fixed Carbon (FCad): 77.88
Sulfur (S): 3.10

We are supplier and exporter of Activated Carbon.

Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm.

Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.

We are exporter of Activated Carbon.

Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.

Grade: 1. Carbon Black PL330J
2. Carbon Black PL330C
3. Carbon Black PL330C
4. Carbon Black PL550C
5. Carbon Black PL550B
6. Carbon Black PL550C
7. PL660B Beads
8. Carbon Black P330
9. Carbon Black P550
10. PL772B Beads

Purity: 1.OAN (ml/100 gm) >90
2.OAN (ml/100 gm) >90
3.OAN (ml/100 gm) >95
4.OAN (ml/100 gm) >100
5.OAN (ml/100 gm) >100
6.OAN (ml/100 gm) >100
7.DBP No (OAN) (cc/100 gm) >100
8.DBP No (OAN) (cc/100 gm) >100
9.DBP No (OAN) (cc/100 gm) >105
10.DBP No (OAN) (cc/100 gm) >90
Actual price will be provided after your enquire.

ITO GLOBAL GRUOP,

Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity.
Our monthly supplying capacity 1000 ton
1-Carbon-95-97-%
2-Sulphur-0.95-%
3-Ash Content-1-%
4-V-M 0.30-%
5-Moisure 0.90-%

Manufactured directly, with strict quality control to ensure consistent performance and cost efficiency.

High-performance carbon nanopowder with an onion-like structure.

Offering exceptional electrical conductivity, thermal stability, and self-lubricating properties.

Ideal for metal alloys, lubricants, composites, and polymer enhancements.

Carbon black can be used in tire and rubber products reinforcement, It is pure black powder or ganular, and has high reinforcement capacity for rubber products and tire manufacture, and could increase rubber service life.

â?¢ Analysis methods: according to GB3778-2021 Product Standards.

We can all is tailor the specification to meet customer choice.

packing:
1000kg(1MT) bag, 500kg bag, and 20kg bag depends on the specific requirement of customers.

Appearance - Black Powder
Particle size - 5-10 um
Surface area - 2000 m2/g
C content - >95%

Particle Size(mesh) - 4-8, 5-10, 6-12, 10-24, 8-30, 20-40
Packing Density (g/ml) - 0.45-0.55
Hardness (%) - 95
Ash Content (%) - 5
Moisture (%) -10
Iodine Value (mg/g) - 900-1250
PH - 6-9

Packaging Details
25kgs/bag, or 500kg/big bag

Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc
Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Packing
25kg PVC bags+1MT big bag or as customers'requested
Trade terms
FOB CNF CIF
Payments
terms
1).T/T 30%advance ,
2).the balance against copy of B/L
Delivery time
After we receive deposit within 7-10days
Sample
Sample is free within 1kgs

Titanium dioxide is a white, odorless, and naturally occurring mineral compound that finds extensive use in various industries. It is most notably recognized as a white pigment in paints, coatings, plastics, and cosmetics due to its exceptional opacity and brightness. Titanium dioxide serves as an effective UV blocker in sunscreens, protecting the skin from harmful ultraviolet rays. In addition to its role in pigmentation and UV protection, it is employed as a catalyst in the chemical industry, and as a strengthening and opacifying agent in the food industry for items like confectionery, sauces, and toothpaste. Its versatility and ability to enhance color, protection, and strength make titanium dioxide an indispensable component in a wide range of everyday products.

We are an Exports of all types of Titanium Dioxide, ilmenite from China.

Grades we have

Description

1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.

2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.

3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.

4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.

5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.

6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.

7. B101 is an anatase of titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.



719 - General Grade

719T - Premium Grade

519 - Chloride Grade



We are looking forward to working with you, and we offer you standard best quality and best prices of Titanium Dioxide For more details please reply.
Please response our email so we can provide you Technical Data Sheet and Prices CIF or CFR and Samples if required

Titanium dioxide, also known as Titanium (IV) or Titania, is a simple inorganic compound produced as a pure white powder with the molecular formula TiO2. Generally, it is available in two main crystal forms, which are rutile and anatase. Anatase is economical, easily dispersed in water-based systems, and a perfect opacifier. Untreated titanium dioxide (anatase) has TiO2 with a refractive index of 2.55. However, it is not commonly used in exterior (weather-exposed) paint applications except for highway paints.

Application: Paint and Coating Industry, Paper Industry, Cosmetics Industry, Food Industry, Plastic Industry etc.

Packing: 25 kg PP Bags

Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility. As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentally responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation.

Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.

Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.

Carbon anode FC 90% -96% , clean , containers will be loaded full capacity

Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation.

Welcome to Gremlog Trading DMCC, a catalyst for sustainable solutions and innovation. We are thrilled to introduce our premier offering carbon dust, a by-product of aluminium smelting . As the primary supplier for carbon dust production, Gremlog Trading DMCC is at the forefront of this groundbreaking initiative. This high-carbon-content by-product, generated during the production of anodes for aluminium smelting, stands as a remarkable alternative fuel for the cement and steel industry.