Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.
Class II Biosafety Cabinet Protection
High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of SS 304
Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to harmful Ultraviolet radiation.
Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.
Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and motor blower are turned off/on as and when front sash is closed/opened. UV lamps functions through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.
Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.
Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.
Floor Stand and Castor Wheels
Floor Stand is made up of heavy duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.
Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table.
Operates with a negative air pressure for personnel protection and HEPA filtered laminar airflow for product protection. Suitable for microbiological and research applications that do not involve radioactive substances and toxic contaminants.
- 7-inch large touch color display: touch operation, real-time and clearer display of various values of the safety cabinet, dynamic air flow pattern diagram, fault alarm sound and light prompt
- The power-on password can be set to prevent mis-operation by irrelevant personnel
- Automatically adjust the wind speed
- Power-off memory, restore the state before power-off, and have a visual reminder to alarm
Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
1285 Biological Safety Cabinet (Class Ii Type A2) Gmp Suppliers
Short on time? Let Biological Safety Cabinet (Class Ii Type A2) Gmp sellers contact you.
Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.
Class II Biosafety Cabinet Protection
High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of CRC sheet duly powder coated
Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to harmful Ultraviolet radiation.
Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.
Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and motor blower are turned off/on as and when front sash is closed/opened. UV lamps functions through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.
Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.
Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.
Floor Stand and Castor Wheels
Floor Stand is made up of heavy duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.
Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table.
ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature.
ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning.
MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: ABS
TYPE: Regrind
SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt
Origin: Bangladesh
LOADING WEIGHT: 26 Ton
FOB (USD/Ton): 750$ - 950$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
The class II Biological Safety Cabinet is an opean front,ventilated cabinet.The Class II biological safety cabinet will provide personnel,environment and product protection.
Front Window: Front window consists two-layer toughened glass>5mm,Motorized control.
Work Zone: Work zone interior is made of 304 stainless steel.
Front Panel: Superstructure is constructed from expoxy coated cold rolled steel for long life.
VFD Display: Compared with LED,LCD,it demonstrates various colors with high bright,even in the evening.It shall work no less than 30,000 hours continually.
UV Lamp: Interlocked and activated to work when blower and fluerescent lamp are offf and front window is closed.
Foot Switch: Use foot switch to adjust the height of the front window.
Front airflow intake grid: Aerodynamically designed front airflow intake gird; Eliminates potential turbulence and contamination.
Waterproof Socket: 2 waterproof sockets are located in the side panel,for optimum convenience of using small devices inside the cabinet.
Advantage:
1. Remote control. The operator need not to contact the biological safety cabinet directly,it¡¯s favorable for preventing cross contamination. It also makes the control operation much easier and convenient.
2. Foot Switch. Within the range of the activity, we could use foot switch to adjust the height of the front window. It is our unique design.
3. Work area surrounded by negative pressure.
4. Timer function
5. VFD display
6. Filter & UV life inquiry
7. Safety power lock
Model:
Parameter : 603588
Internal size(mm): 600,400,580
External size(mm) :700,500,1200
Tested Opening :200 mm
Working Opening :400 mm
Inflow Velocity :0.53 m/s
DownFlow Velocity :0.33 m/s
Filter : Two HEPA filter 99.999% efficient(0.3 microns)
Blower : 1
Front Window : Two-layer toughened glass >5mm
Noise: 65 dB
UV lamp : 15W,1
Fluorescent Lamp : 40W,1
Lighting (Lux) : 680
Power(W) : 800
Water and Gas Tap : 0
Waterproof Socket : 2
Display : LED display
Control System: Microprocessor
Airflow System : 70% air recirculation,30% air exhaust
Material: Work zone interior is made of 304 stainless steel, Body: Epoxy coated cold rolled steel
Base (optional) Height: 635mm
Caster Wheel: Universal Wheel
Clean Level : 100
Electrical Parameter : 110~240V/50~60Hz (optional)
Net weight(kg) : 80
Gross weight(kg) : 110
Package (mm): 950,850,1430
Standard Configuration: Body, Remote control, Foot switch, UV lamp and Fluorescent Lamp
Optional Accessory : Armrest, Air curtain tester, Formalin fumigation sterilizer, Ammonium hydrogen carbonate neutralizer.
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.
Class II Biosafety Cabinet Protection
Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.
Class II Biosafety Cabinet Key Features
A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the room or exhaust to a facility exhaust system.
Class II Biosafety Key Applications
Typically used for biosafety levels 1 through 3 for low to moderate risk biological agents.
The type B2 total exhaust cabinets are widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
All types of Class II cabinets may be used in biosafety level 4 laboratories when workers utilize positive pressure suits. However, for level 4 Class III cabinets are recommended.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of electrogalvanized powder coated OR Stainless Steel (SS-304) (as ordered).
Front Window/Sash
Front Sash consists of a thick plexi-glass or toughened transparent glass (Option) for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protection user from exposure to harmful Ultraviolet radiation.
Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.
Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and the motor blower is turned off/on as and when the front sash is closed/opened. UV lamps function through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.
Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.
Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.
Floor Stand and Castor Wheels
Floor Stand is made up of heavy-duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.
Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table
Biological Safety Cabinets
The Microbiological Safety Cabinet (Biological Safety Cabinet) is for physical isolation of pathogenic biological agents (PBA) and microorganisms to prevent airborne infection of the staff and contamination of the air in the working room and to protect the environment
Biological Safety Cabinets
The Microbiological Safety Cabinet (Biological Safety Cabinet) is for physical isolation of pathogenic biological agents (PBA) and microorganisms to prevent airborne infection of the staff and contamination of the air in the working room and to protect the environment.
The Biological Safety Cabinet is a critical medical equipment for hospitals, ensuring a safe environment for handling hazardous materials. It offers a high level of protection for both operators and the surroundings during the manipulation of infectious agents, chemicals, or pharmaceuticals. This cabinet features HEPA filtration, maintaining a sterile airflow to prevent contamination. Its ergonomic design and advanced airflow controls enhance user comfort and precision. Equipped with a clear viewing window and an alarm system, it guarantees safety and compliance. This indispensable equipment is vital for infection control, research, and pharmaceutical work, making it an essential asset in any hospital's safety protocols.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.
Class II Biosafety Cabinet Protection
Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.
Class II Biosafety Cabinet Key Features
A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the room or exhaust to a facility exhaust system.
Class II Biosafety Key Applications
Typically used for biosafety levels 1 through 3 for low to moderate risk biological agents.
The type B2 total exhaust cabinets are widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
All types of Class II cabinets may be used in biosafety level 4 laboratories when workers utilize positive pressure suits. However, for level 4 Class III cabinets are recommended.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of electrogalvanized powder coated OR Stainless Steel (SS-304) (as ordered).
Front Window/Sash
Front Sash consists of a thick plexi-glass or toughened transparent glass (Option) for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protection user from exposure to harmful Ultraviolet radiation.
Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.
Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and the motor blower is turned off/on as and when the front sash is closed/opened. UV lamps function through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.
Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.
Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.
Floor Stand and Castor Wheels
Floor Stand is made up of heavy-duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.
Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table
1285 Biological Safety Cabinet (Class Ii Type A2) Gmp Suppliers
Short on time? Let Biological Safety Cabinet (Class Ii Type A2) Gmp sellers contact you.
