This is a common accelerator for natural rubber, synthesis rubber and reclaimed rubber, which is easy to spread in rubber, no contamination. Vulcanized rubber has good antioxidant quality, but bitter, unsuitable for the rubber products contacting with food. Mainly used for the manufacturing of tire, rubber tube, rubber tape, general industrial rubber products.
Product Introduction
MBTS is an accelerator of NR and SR. It has level and middle cure rate and higher Vulcanization temperature. It operates safely disperses easily and does not contaminate. It is aging resistant. White or light yellow powder or granule with slightly bit-ter taste, nonpoisonous.
Application
Mainly used in manufacture of tires, rubber tubes, rubber shoes, rubber cloth and other technical rubber goods. Accelerator MBTS works as plasticizer and delayed action activator in poly-chloroprene.
Packing:
In knitted bag lined with plastic bag or Kraft paper bag.
25kgs/bag or at buyer's request.
Accelerator MBT is Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with DM, TMTD and many other basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution. Mainly used in the manufacture of tires, tubes, foot wear rubber belts and hoses etc.
Dibenzothiazole disulfide
Cas no: 120-78-5
Specification: no. Itemunitspecification
1appearance light-yellow powder
2initial m. P. (min)c162.0
3loss on drying (max)%0.40
4ash (max)%0.50
5residues on 63um sieve (max)%0.50
6oil content (*)%0; 1.0--2.0
Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt.
Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions.
Dibenzothiazole disulfide
Cas no: 120-78-5
Specification: no. Itemunitspecification
1appearance light-yellow powder
2initial m. P. (min)c162.0
3loss on drying (max)%0.40
4ash (max)%0.50
5residues on 63um sieve (max)%0.50
6oil content (*)%0; 1.0--2.0
Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt.
Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions.
Packaging: 20kg bag.
2518 Accelerator Mbts Suppliers
Short on time? Let Accelerator Mbts sellers contact you.
Appearanceyellow powderyellow powderyellow powder
InitialºC=173.0171.0170.0
Loss on drying %=0.300.400.50
Ash%=0.300.300.30
Residues=0.100.100.10
It is yellow powder. Slightly foul odor and bitter taste,nonpoisonous.
Specific gravity :1.42-1.52.Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate,ethyl alcohol. Not easily soluble in benzene.
Insoluble in water and gasoline.
It is used in the manufacture of tires, tubes, footwear, rubber belts and hoses.
Its packing is paper with plastic film bag,25kg plastic woven bag
The product should be stored in the dry and cooling place with good ventilation,avoiding exposure of the packaged productto direct sunlight.
Chemical name Dibenzothiazole disulfide
Molecular formulaC14h8n2s4
Molecular weight332.46
Chemical structure
Cas no.120-78-5
Einecs no.: 204-424-9
Classification: Chemical auxiliary agent
Usage: Rubber auxiliary agents
Purity: 99%
Place of origin: Henan china (mainland)
Brand name: Xin xiang yuan ye
0kg/bag polypropyrene knitted bags lined with polyethylene bags.
1f=specification:(gb11407-89)
Item specification
High grade 1st grade qualified
Appearance light-yellow or pale powder and grain
Melting point, f¦fª 173.0 171.0 170.0
Ash·+%f_ 0.30 0.30 0.30
Reduction in weight after heating·+%f_ 0.30 0.40 0.50
Screen residue(100 meshes)·+%f_ 0.00 0.10 0.10
2f=properties:light-yellow or pale-yellow powder, bitter, poisonless, nonsoluble in water and gasoline, but soluble in ethyl acetate, acetone, dichloromethane, ether, chloroform and in the solution of alkaline carbonate.
3f=application:an universal rubber accelerator, mainly is used in tyres, rubber shoes and other rubber articles. It is not used in rubber bags for food because of its bitter.
Package:polypropyrene knitted bags lined with polyehtylene bags. Net weight 25kg per bag
Chemical Name: Dibenzothiazole disulfide
Specification:
Item Powder Oiled powder Granule
Appearance Gray-white or light yellow powder(granule)
Initial M.P. �¿C â?¥ 167.0 167.0 167.0
Loss on drying % â?¤ 0.30 0.50 0.30
Ash % â?¤ 0.30 0.30 0.30
Residues on 150�¼m sieve, % â?¤ 0.10 0.50 --
Additive, % -- 1.0-2.0 --
Granule Diameter, mm -- -- 1.50
Properties:
A little bitter taste. Specific gravity: 1.45--1.54. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application:
Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than Accelerator MBT.
Packaging:
25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: 2-Mercaptobenzothiazole
Specification:
Item Powder Oiled powder Granule
Appearance Light yellow powder(granule)
Initial M.P. C 171.0 171.0 171.0
Loss on drying % 0.30 0.50 0.30
Ash % 0.30 0.30 0.30
Residues on 150 m sieve, % 0.10 0.10
Additive, % 1.0-2.0
Granule Diameter, mm 1.0-3.0
Properties:
It is light yellow powder (granule) with a little osmyl and taste bitter . Specific gravity:1.42-1.52. Soluble in ethyl acetate , ethanol , solution of NaOH and Na2CO3 , insoluble in benzene , water ang gasoline .
Application:
Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with MBTS, TMTD and many others basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution . Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc.
Packaging:
25kg plastic woven bag , paper with plastic film bag , kraft paper bag or jumbo bag .
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT.
Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions.
Trade name: MBTS,DM
Chemical Name: Dibenzothiazole disulfide
Molecular Formula: C14H8N2S4
Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with DM, TMTD and many other basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution. Mainly used in the manufacture of tires, tubes, foot wear, rubber belts and hoses etc.
Rubber Accelerator MBTS(DM)
Chemical Name: Â Dibenzothiazole disulfide
Molecular Formula: Â C14H8N2S4
Molecular Weight:332.50
CAS NO. : Â 120-78-5
 Executive standard GB/T 11408-2003
Specification:
Appearance(Visual inspection) White or light yellow powder, granular
Initial M.P, Â oC 164.0
Loss on drying, % 0.40
Ash, % 0.50
Residues on 150 m sieveï 0.10
Purity 95.0
Properties: white or light yellow powder (granule) with a little bitter, no poison. The density is 1.50, Melting point above 170 slightly soluble in benzene, chloroform and ethanol, is not soluble in water petrol. And ethyl acetate. Good storage stability.
Application:� Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining and non-discolouring in "white" socks; used as a plasticizer and retarder in polychloroethylene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT.
Packaging:� 20kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Storage:� e product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Note: Â The product could be ultra fine powder based on customer accurate requirement.
Chemical Name:2-Mercaptobenzothiazole
Molecular Formula: C7H5NS2
Modular Weight: 167.25
CAS NO: 149-30-4
Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline.
Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc.
Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions.
Chemical Name: 2-Mercaptobenzothiazole
Molecular Formula: C7H5NS2
Molecular Weight:167.26
Product Standard: GB/T11407-2003
Cas no: 149-30-4
Specification
Item Top Grade First Grade Qualified Grade
Appearance
(Visual Inspection) Yellow Powder
Initial M.P.,173.0 171.0 170.0
Loss on Drying%,í_ 0.30 0.40 0.50
Ash%,í_ 0.30 0.30 0.30
Residues(150)%, 0.00 0.10 0.10
Properties: Yellow powder.Slightly foul odor and bitter taste,nonpoisonous. Specific gravity: 1.42-1.52. Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline.
Application: The product is a hemi-ultra accelerator, extensively used in vulcanization of natural and synthetic rubbers. Mainly used in the manufacture of rubber tires, rubber belts, rubber shoes and other industrial rubber products.
Storage: The product should be storaged in the dry and cooling place with good ventilation.
Notes: The product could be oiled and pelleted upon customers request.
Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT.
Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions.
I'm a rubber chemicals supplier and manufacturer from China. We mainly focus on rubber chemicals like *Accelerator MBT, MBTS, CBS, NOBS, DPG, TBBS, etc. *Antioxidant TMQ, IPPD, 6PPD, BLE, DTPD, DBD, DBD-40 *Antiscorching PVI *Phenolic resin RT11**series -- 5***series *Carbon black N330,N660,N550, etc. We have good cooperation factories, and we are winning the praise of clients with our huge inventory, the most complete varieties, the most stable supply of goods, and the most timely supply.
2518 Accelerator Mbts Suppliers
Short on time? Let Accelerator Mbts sellers contact you.
