Application :For the transmission of OIL & Gas
Specs: OD: 40.26mm--114.3mm
WT: 3.18mm-16mm
LENGTH: R1, R2,R3
Standard & Grade : API 5CT J55/K55/N80/C75/L80/C90/T95/Q125
Process Type: Seamless , ERW
Ends: Beveled , Square cut, with NUE/EUE connection
Surface:Anti- corrosion water based paint
Packing: Protection Caps in both End, Waterproof Paper Wrapped, Two Tags
Usage:Tube for conveying gas, water, and oil in both and natural gas industries etc.
Tubing: Tubing is pipe used for the transportation of crude oil and natural gas from an oil or gas layer to the surface after drilling is complete. It is made to withstand the pressure generated from the extraction process. Tubing is manufactured in the same way as casing, except that an additional process known as "upsetting" is applied to thicken the pipes.
Quality Standard:
SY/T 6194 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
API 5CT CASING AND TUBING
BS EN ISO 11960 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
NF M87-207 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
JIS G3439 SEAMLESS STEEL OIL WELL CASING, TUBING AND DRILL PIPE
IS : 4270Steel tubes for well spainend casing pipes
Size:
Outer Diameter:
Tubing: OD 2 3/8" - 4 1/2" (60.3mm-114.30mm)
Wall Thickness: 0. 205"- 0.635"
Length: R1(4.88mtr-7.62mtr), R2(7.62mtr-10.36mtr), R3(10.36mtr or longer)
Connection: Casing: LTC, STC, BTC, VAM.Tubing: NUE, EUE.
End: Beveled, Square cut. And pipe protection cap specially for casing and tubing.
Surface: Corrosion proofing water based paint
Heat treatment: Normalized, Quencher+Temper
Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection, Nondestructive Test (Ultrasonic flaw detector, Eddy current flaw detector), Hydrostatic Test.
Mill Test Certificate: EN 10204/3.1B
Product name:
Api 5ct tubing pipe
Product keyword:
Steel pipe, oil & gas pipe, petroleum pipe, api pipe, tubing pipe, steel tube
Brief description:
Api 5ct tubing pipe, outside diameter: 2-3/8¡± to 4-1/2¡±, steel grade: j55, n80, l80, p110, type of end-finish: eue & nue, length range: r1/r2/r3, manufacture process: seamless or electric-welded (electric-resistance or electric-induction welded),
Product details:
Standard: api specification 5ct, ninth edition, july 2011,
Outside diameter: 2-3/8¡± to 4-1/2¡± (60.32-114.30mm),
Steel grade: j55, n80, l80, p110,
Range length: r1 (6.10-7.32metres), r2 (8.53-9.75metres), r3 (11.58-12.80metres),
Manufacture process: seamless or electric-welded (electric-resistance or electric-induction welded),
Type of end-finish: nu (non-upset), eu (external-upset), or pe (plain end, unthreaded),
Type of thread: 8 round thread or 10 round thread.
Tubing is pipe used for the transportation of crude oil and natural gas from an oil or gas layer to the surface after drilling is complete. It is made to withstand the pressure generated from the extraction process. Tubing is manufactured in the same way as casing, except that an additional process known as "upsetting" is applied to thicken the pipes.
The tubing production processing is similar to the process of casing production.
Tubing pipes typically have diameters of 60.32 mm to 114.30 mm.
Size:1.315" to 4-1/2"
Grade:J55,K55,N80-1,N80Q,L80-1,L80-9Cr, L80-13Cr,P110
Type of End-Finish:PE,NUE,EUE
2.Product Details:
API 5CT Steel Pipe
1.Standard;API SPEC 5CT API SPEC 5B 2.Grade;J55 L80-1 N80 C90 T95 P110 3.Application;extracting petroleum and natural gas
1.Standard;API SPEC 5CT API SPEC 5B 2.Grade;J55 L80-1 N80 C90 T95 P110 3.Application;extracting petroleum and natural gas from a well,Casing serves as walls of a well
Out Diameter Casing:4 1/2" ~ 20" (114.3 mm ~ 508mm), Tubing: 2-3/8" ~ 4-1/2" (60.32mm ~ 114.3mm)
Wall Thickness as per API 5CT standard ( the latest edition )
Length R1, R2, R3
Steel Grade H40/J 55/K55/N80/ C75/L80/C90/ T95/ P110/Q125
Pipe Type Seamless (SMLS)
Threads or Connection Casing:LTC/STC/BTC/ Left Hand connection or other premium threads like: VAM
Tubing:EUE, NUE
Surface Treatment Anti-corrosion Water Based Paint
Packing Protection Caps on both ends and in bundles with steel strips and two tags as per export requirements
Application Used as the architectural retainer for the walls of oil, gas wells
chnical characteristic
Adopting the advanced production line crack detecting, quenching, the continuous overall tempering and sand blasting processes to achieve higher mechanical strength ability with overall good performance.
1The thread is cut by the special-purpose numerical control lathe which keeps the rod body still when cutting the threads. The special process could ensure the high precision of the thread with better reliability and life-span.
2Coupling phosphor or copper coated to achieve good wearing-resistance ability and anti-thread gluing ability.
Tubing
Product Name:
API 5CT Casing Pipe
Product Keyword:
Steel Pipe, Oil & Gas Pipe, Petroleum Pipe, API Pipe, Casing Pipe, Steel Tube
Brief Description:
Outside Diameter: 5-1/2¡± to 20¡±; Steel Grade: J55, K55, N80, L80, P110; End-Finish: PE, STC, LTC, BTC; Length Range: R1/R2/R3; Manufacture Process: Seamless or Electric-Welded (Electric-Resistance or Electric-Induction Welded);
Product Details:
Standard: API Specification 5CT, Ninth Edition, July 2011
Outside Diameter: 5-1/2¡±-20¡± (114.30-508.00mm)
Steel Grade: J55, K55, N80, L80, P110
Range Length: R1 (4.88-7.62metres), R2 (7.72-10.36metres), R3 (10.36-14.63metres);
Manufacture Process: Seamless or Electric-Welded (Electric-Resistance or Electric-Induction Welded);
Type of Threading: STC (Short Round Thread), LTC (Long Round Thread), BTC (Buttress Thread), or PE (Plain End, unthreaded).
Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or wellbore. It is inserted into a well bore and cemented in place to protect both subsurface formations and the wellbore from collapsing and to allow drilling fluid to circulate and extraction to take place. The following different types of casing are used in the extraction process:
Surface casing
- Protects the well from contamination in shallow water and gas layers.
- Supports the wellhead equipment and sustains the weight of the other layers of casing.
Intermediate casing
- Isolates different layers of pressure to facilitate normal circulation of drilling fluid and protect the production casing.
- Intermediate casing facilitates the installation of blow-out preventers, anti-leakage devices and tailpipes in the well.
Production casing (oil string)
- It is the conduit through which oil and gas pass from a below surface reservoir.
- It protects the well and separates fluids into various layers.
For the manufacture of casing, green pipes are threaded on each end at first. The threading is then inspected and, if necessary, rethreaded to ensure that the thread accurately connects to the coupling. The casing are strengthened by surface treatment and are subject to various inspections, including drifting and hydrostatic tests before they are coated and packaged into casing.
API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries.
API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed.
Specification:
Api 5l X80 Psl2 Sizes
Nominal Pipe Size 1/2" to 48 " O.D.
Wall Thickness - Schedule 10 through 160, STD, XS, XXS.
Api 5l X80 Erw Pipe Standard
API 5L X80 (Specification for Line Pipe - ANSI/API specification 5L - 44th Edition, October 1, 2007)
Product Specification Level (PSL)
API 5L X80 PSL 2
API 5L X80 PSL 1
API 5L X80 Line Pipe Length
Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths
Api Grade X80 Pipe End
Plain, Bevel, Screwed, Threaded
Testing and Inspection Reports
EN 10204 3.1, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test
Report, Non Destructive Test Reports, Mill TC EN 10204 3.1, NABL Approved Lab, Chemical and Mechanical Reports,
India Boiler Regulations (IBR) Test Certificate
API 5L X80 Pipes Type
Seamless / ERW / Welded / Fabricated / CDW
Technical data
ASTM API 5L X80 Seamless and Welding Steel Tube Mechanical Properties:
Grade
Pipe body of seamless and welded pipes
Weld seam of EW, LW, SAW and COW pipe
Yield strength
Tensile strength
Tensile strength
Minimun
Maximum
Minimun
Maximum
ASTM API 5L X80
555 (80 500)
705 (102 300)
625 (90 600)
825 (119 700)
625 (90 600)
X80 Pipe yield strength:
Grade
Permissible yield point ratio
Yield Strength MPa(min)
Tensile Strength MPa
Elongation % (min)
X80
= 0.90
555
625 â?? 700
20
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Washover pipe is a special tool to release the stuck section of drill string in the well bore. TIANHE offers a complete range of washover pipe in the industry. TIANHE unique FJWP thread is a two-step double shoulder thread which assure quick make up and high torsion strength.
Specifications - Washover Pipe
API Downhole N80 Washover Pipe
Washover pipe accessories:
Drive Sub
Drive Subs provide the crossover connection between fishing string and the washover pipe. Each is machined from high-grade alloy steel and heat treated to provide maximum strength and durability.
Lift Plug
Lift Plug is designed to provide an economical method of handling washover strings. It is available in all thread types and size, has sufficient shoulder diameter to support handling the washover string.
Washover Safety Joint
Washover safety joint is manufactured to provide safe and easy release and make-up whenever disengagement from the washover string becomes necessary. This dependable, field-tough tool is designed to transmit torque in either direction when placed in the washover string.
Rotary Shoes
Rotary Shoe are manufactured from specially heat treated alloy to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore.
API Downhole N80 Washover Pipe
API Downhole N80 Washover PipeAPI Downhole N80 Washover Pipe
Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
Production Process for ERW steel pipe:
1.Uncoiling
2. Leveling --- 3. End cutting --- 4. End shearing welding --- 5. Supercoil accumulator --- 6. Edge cutting --- 7. Ultrasonic detection --- 8. Forming --- 9. Electric induction welding --- 10. Ultrasonic detection for weld seam --- 11. Medium frequency heat treatment --- 12. Air cooling --- 13. Water cooling --- 14. Sizing --- 15. Flying cutting --- 16. Flush-out --- 17. Cropping --- 18. Flattening testing --- 19. Straightening --- 20. End facing and bevelling --- 21. Hydrodynamic testing --- 22. Ultrasonic detection for weld seam --- 23. Ultrasonic detection for pipe end --- 24. Visual and dimensions inspection --- 25.Weighting and measuring --- 26. Marking --- 27. Coating --- 28. Pipe-end protection --- 29. Bending --- 30. Shipping
Specification of ERW steel pipe:
API 5L/ASTM A53 GR.B (Small Diameter ERW Steel Pipe)
Outside Diameter
Wall Thickness
Outside Diameter
Wall Thickness
(mm)
(mm)
(mm)
(mm)
33.4
(1")
2.1-2.4
133
3.0-5.75
2.5-3.25
6.0-7.75
3.5-4.0
8.0-10
42.3
(1.2")
2.1-2.4
139.7
(5)
3.0-4.5
2.5-3.5
4.75-5.75
3.75
6.0-7.75
4.0-5.0
8.0-10
48.3
(1.5")
2.1-2.4
152
3.0-4.5
2.5-3.25
4.75-5.75
3.5-3.75
6.0-7.75
4.0-4.25
8.0-10.0
4.5-6.0
159
3.25-6.75
60.3
(2)
3.0-4.0
6.8-7.75
4.25-4.75
8.0-10.0
5.0-5.75
10.0-11.75
73
3.0-4.75
165
3.0-6.0
4.8-5.25
6.25-7.0
5.5-7.0
76.1
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Standard: API Standard: API 5CT Grade: API J55-API P110 Grade: API P110 Thickness: 5.21 - 16.13 mm Section Shape: Round Outer Diameter: 114.3 - 508 mm Place of Origin: China (Mainland) Application: Oil Pipe Technique: Hot Rolled Certification: API Surface Treatment: Painted Special Pipe: API Pipe Alloy Or Not: Is Alloy .Packaging & Delivery
Packaging Details: Capped & in bundles
Delivery Detail: 15-60 days
Specifications
1. Provide API 5CT OCTG casing pipe
2. Hydrostatic/UT tested; heat treatment applied
The couplings produced by our company are good at stable quality which the technical parameters are completely complied with the requirements of API5CT and API5B latest standards. Meanwhile, the company has equipped with more than 30 sets CNC threading machines, is able to produce variety of steel grade couplings include STC, LTC, BTC and NU, EU threading couplings. Please visite our website: www.richsen.cn
The size for Tubing couplings are ranged from 2-3/8'' to 4-1/2'', as well as 4-1/2'' to 20'' for Casing Couplings. The company can produce all kinds of couplings over 1 million pieces annually.
If you have any questions, please contact Laura@richsen.cn in any time.
