DC24V Flexible COB LED Strip, 10mm width fpcb, 10w/m, green color wavelength 520-530nm , 800-1100lm/m , usually each 5m a roll.
Beside, we have 2800-3200k warm white, 4000-4500k natural white, 6000-6500k white , red color 620-630nm, yellow color 585-595NM, blue color 450-460nm for your choice.
COB LED strip with the newest technology that these led chips are assembled on the flexible PCB directly, and the led chips are in very high desity,so the emitting color is almost without any dark spot,also covered with the phosphor diffuser,the color is super mooth, uniform and delicate.More advantages than ordinary LED strip,and can be installed directly without other aluminum profile or diffuse cover.
(1) LC8813 LED Strip use LC8813 led chip to be the light source , it have dual signal and the capacitance is package in the led chip , so in the PCB , you can see there are no capacitance.
(2) The LC8813 LED is a new LED, it is the upgrade led on the base of WS2813, they are same function, they have dual-signal transfer, two data line work at same time, so if one led broken,the other will still works.
Size 1-3 MM
Thickness 1-2mm
Usage/Application Interior
Form Tile, Cut to size, Slab
Usage countertops
Size/Dimension 1x1,2x1,2x2,2x4,4x4,4x8 feet
Product Description
Deoli Green Slate Veneer is a Natural Stone Veneer that can be glued to many different indoor and outdoor surfaces like Doors & Cabinets, Furniture, Trim & Backsplashes, Marine Ships, Kitchens, Bathrooms, Flooring, and Signage etc. Stone''s Veneer light weight and flexibility is appropriate for many applications such as wall paneling, Cladding on the buildings vertical and horizontal surfaces.
Flexible stone veneers are considered a true stone veneer in the same way that wood veneers are very thin sheets of wood. It is used for both interior and exterior and especially where bending to a curved surface is required. Flexible stone veneer is made from a thin layer of stone stripped or peeled from a stone slab, rather than cutting from a solid stone or precast composite material.
Additional Information
Delivery Time depend upon quantity.
Port Of Dispatch Mundra/TUGLAKABAD/NAVA SHEWA/JNPT
Production Capacity 500 sq.mtr/day
Packaging Details : 25 Sheets (1220x610 mm) in one corrugated Box/ 12 Boxes in one Wooden Crate/ Total: 220 m2 in one Wooden Crate. 1x20' Container Capacity - 10/000 SQM
Payment Terms L/C (Letter of Credit)/T/T (Bank Transfer)
- LED Color Blue, White, Yellow, Gold, etc etc
- Circuit board width : 6mm
- Number of Lamps : 6 L
- Voltage : 220V -240V 50/60 Hz
- The appreances of Colors : Transparants
- Product Types : 50 50
- Meas : 28x28x14 cm
- Including transformer to convert power from AC to DC
- 1 Roll (Included 100 Meters of LED Strip, 5 Transofrmers to conver power from AC to DC)
- 1 Ton (Contains 166 Roll of LED Strip),
DC24V Flexible COB LED Strip, 10mm width fpcb, 10w/m, green color wavelength 520-530nm , 800-1100lm/m , usually each 5m a roll.
Beside, we have 2800-3200k warm white, 4000-4500k natural white, 6000-6500k white , red color 620-630nm, yellow color 585-595NM, blue color 450-460nm for your choice.
COB LED strip with the newest technology that these led chips are assembled on the flexible PCB directly, and the led chips are in very high desity,so the emitting color is almost without any dark spot,also covered with the phosphor diffuser,the color is super mooth, uniform and delicate.More advantages than ordinary LED strip,and can be installed directly without other aluminum profile or diffuse cover.
1033 24V Green Ip20 Ip65 Ip67 Flexible Cob Led Strip Suppliers
Short on time? Let 24V Green Ip20 Ip65 Ip67 Flexible Cob Led Strip sellers contact you.
Smd3528 series, high cri, ra can up to 95, excellent light performance. S-shape strip can be used to curved surface, easy and flexible installation. Dc 12v/24v, 5 sdcm, 3years warranty.
Specification:
Default pcb width (mm) 8
Cuttable (mm) 100
Leds / m (pcs) 60
Input voltage (vdc) 24
Power (w/m) 4.8
Luminous flux of nw (lm/m) 410
Color rendering index (ra) >80
Color r / g / b / y / w
Ip rate ip65
This SMD Led strip with LED lights, it's the coolest way to decorate any vehicles.
This innovative SMD Led strip is completely flexible, you can twist it into any shape.
It's safe for indoor and outdoor.
SMD Led strip is easy to install, long lasting brightness but low voltage(12V).
It's good for decorating floor mats, running boards, boat, bicycle...etc.
Led Color: Green
Background Color: Black
Led Number: 30 LED
LED Strip Length: 60cm & 24inches
LED Spacing: 10mm
Voltage: 12volts ready / 640ma.
Cable Standard
According to DIN 72551-6 & ISO 6722 B
JIS C 3406, JASO D 611/608, IS 2465,
BS 6862 : PART 1
Cable Features
- Excellent flexibility
- The NESKEB Auto cables is impervious
to water, petrol, diesel, acids, engine and
lubricating oils and grease resistant
- High mechanical strength
- Excellent flame retardant properties
- Excellent mechanical & electrical properties
Standard Packing
Coils 100, 200, 500 and 1000m
Conductor
Flexible Bare Copper Wire
Insulation
Pvc Insulation
Cables Type
FLRY-A and FLRY-B
Color
Blue, Black, Brown, Grey, Orange,
Pink, Red, Violet, White, Green,
Yellow, Yellow / Green, Lining Strip
Color Also and as per Customer
Requirement
Temperature
20�?�°c to 105�?�°c
Application
These cables are used as original equipment's
for wiring automobiles and in the auto harnesses
Basic Parameters
Dimensions: 201 x 99 x 35 mm
Weight: 333g
Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A
Display mode
Segment LCD with white backlight + LED in red and green
Function Introduction
Charge
Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3.
Tester will stop charging if one of the conditions below was met.
1) Remaining capacity 99% & current intensity = 0
2) Remaining capacity = full charge capacity
3) Current intensity reduce to end charge current when constant voltage charge
4) Remaining capacity reach up the set value
Discharge
Constant current discharge for double loads
Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager
External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered
Tester will stop discharging if one of the conditions below is met.
1) Remaining capacity set value
2) Voltage set value
3) Current intensity reduce to zero
Remarks:
Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value.
Test
Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.
Normal: Test OK Shown on LCD
Abnormal: Test NG Shown on LCD
Possible causes and solutions for the abnormal:
1) Cause: battery voltage is too low to discharge
Solution: try to charge the battery to raise voltage
2) Cause: remaining capacity is too full to charge any more
Solution: try to discharge the battery to reduce the remaining capacity
3) Bad contact of battery connecting wires
4) Damaged battery
5) Tester trouble
Capacity Correction
The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip.
Remarks:
Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again.
50% Capacity
CD50%: charge firstly, and then discharge to 50% capacity
DC50%: discharge firstly, and then charge to 50% capacity
Online Functions
Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.
Monitoring
Battery information can be monitored via three windows.
1. Home screen
Battery bar and brief information can be read on home screen.
2. Battery detail information window
Show smart battery data in real time and the data can be saved and printed in image format.
3. Battery graph window
Voltage, current and capacity are traced in curves.
Control
Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands.
Attention
All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester.
Others
1. Active cooling
2. Active batteries of zero voltage
When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery.
3. Battery identification
Battery information can be read from battery management chip after establishing communication.
4. Intelligent protection
Against over-current, over-voltage, over-charge, over-heat and short circuit.
5. Fan
Discharging mode: fan startup
Other modes: fan startup when temperature above 48
Fan stop working when temperature below 40
6. Trouble alarm
LED flickers in red color and current command stops when one of the conditions below happen.
1). There is not current for around 50 seconds when charge.
2). There is not current for around 25 seconds when discharge.
3). Charging time is above 8.8 hours.
4). Discharging time is above 9.9 hours.
5). Suitable for almost all laptop batteries, above 95%
Structure
Accessories
1).1 * adapter
2). 1 * USB cord
3). 1 * CD
4). 13 * connectors
5). 10 * cables
6). 10 * jumpers
7). 1 * loader
Hree-channel XT9822 is a two-wire transmission (RGB) the drive control circuit and the light-emitting circuit in the integration of intelligent control LED light source. CLK signal ao the DATA and DATA synchronization, the double signal transmission, the transmission speed. Can compatible APA102C lamp bead, built-in oscillate support continuous PWM output, can maintain the picture still. Apply to magic lantern, balance lights, lamp screen LED electronic screen and other LED products.
Model:XT9822
Brand:JERCIO
Product specification:SMD 5050RGB
Operating voltage:DC 5V
Product Chip:Sanan
Drive IC:mingwei Sk6812 IC
Rated current:12mA
Product power:0.25W
Service life:50000H
1. Easy to assemble and maintain, flexible and durable to be shaped
2. Can be cut off on marked place and connectable with suited accessory
3. High luminance efficience and low power consumption
4. High intensity and reliability, strong enough to stand heavy pressure
5. Weather and temperature resistant
6. Fast Delivery time
7. FREE SAMEPLES provided for test
8. OEM/ODM service
Model: glt-rc5050(rgb)-60l
Color: rgb
Input voltage: dc12v0.5v)
Power efficiency: 90%
Angle: 120¡ã
Led type: 5050
Led qty: 60
Color temperature: 2500-10000k
Size £ºl1000*w8*h3-5mm
Safety precaution: ip20
Life span: 50000h
Length: 5m/pcs
Packing: 5m/pcs
Characteristics
1. Adopt high lumen led, single led under 1 wart, low heat, no glare, impact resistance, low input voltage of 12/24v.
2. Pure and rich colors available, controllers supply to change the color of single color or rich colors.
3. Long lifespan reached 50000 hours, free of maintain.
4. Each group of three leds can be cut without damage the whole light, stick together as long as you want. Printed circuit board, back with two-side glue used to paste attached to the fixture.
5. Optional docking, bending, cutting and any fixed in the bump surface are supported.
6. The light thin and small size of our products, rich color and variety of colors is suitable for small space.
7. Led strip for the path, the building outline sign, steps, exhibition, the bridge, the hotel, ktv decoration lighting, and the production of various kinds of large billboards, picture, calligraphy and painting the advertisement design and other places.
8. Led strips are made of 12v lvdc£¬save for everyone even kids.
9. We can provide matching constant current power supply.
Applications
Led strip is widely used in indoor lighting, shopping mall, super market, showroom, clubs, store, hotel, restaurant, school, library, art gallery, museum, office building, home decoration, amusement park, theater and aircraft cabin mood lighting, archway, canopy and bridge edge lighting, emergency hallway lighting, auditorium walkway lighting, architectural decorative lighting.
Voltage: dc12v or dc24v
Led type: smd5050
Led qty: 60 leds/meter
Color: red, yellow, blue, green, white, warm white, pink
Features:
1. Can be bent at will, can be fixed in the concave and convex surfaces freely.
2. Small size, colorful
3. Widely lighting angle, 120
4. 3 pieces leds or 6 pieces leds form a circuit can be cut according to the actual purposes.
5. Simple circuit, low-voltage power, safe and reliable.
6. The space between leds can be designed according to customers requirements.
7. Rgb type can be controlled by controller, different color changing functions.
8. Ce, rohs, fcc certificates. Iso9001:2008.
Packaging means: 5 meters/reel
Size: 5000*10*4 mm
Waterproof: ip20, ip65, ip67, ip68 are available, tube or epoxy or silicon
Description:
* The size of PCB: 5000*6/8*2.2mm 5000*8*2.5mm 5000*8/10*4mm 5000*14/15*2.2mm
* LED quantity per meter: 30pcs/meter,60pcs/meter,120pcs/meter,240pcs/meter
* PCB's color: White / Brown
* Input voltage: DC12v / DC24v
* Power per meter: 2.4w/meter(30pcs LED) 4.8w/meter(60pcs LED) 9.6w/meter(120pcs LED) 19.2w/meter(240pcs LED)
* Bean angle: 120 degree
* Light color: Red, Yellow, Blue, Green, Pure White, Warm White and Violet are available
* Packing: 5meters/reel with a anti-static & moisture-proof plastic bag
* Protect range: Waterproof(you can choose: 1.Resin Dripped Waterproof 2.Silicon cover waterproof 3.Solid silicon waterproof) and Non- waterproof
* Life span: 50000 hours in average.
Feature:
* Each group of 3 LEDs can be cut at regular segments without damaging the rest ribbon
* 3M Tape attached, easy to install
* Super-bright,low power consumption of LED,low heat
* Flexible,easy to bend and install
* Solid-state,high shock/vibration resistant
* Working Temperature: -20 to 60 celsius
* Environment friendly,CE & RoHS & FCC are approved
* Warranty: 2 years.
Notice:
* Please do not use it directly under AC220V
* Please do not opposite the Positive pole and Negative pole
* Please try to install it under the environment with anti-static.
Application:
* Personal DIY decoration
* Furniture decoration lighting
* Auditorium walkway lighting
* Amusement park and theater lighting
* Shopping mall, restaurant, hotel, meeting room and advertisement signs backlighting
* Archway/Canopy and bridge edge lighting.
• 10.5mm (0.41") wide, 3mm (0.12") thick, 100mm (3.95") long per segment
• Clear waterproof molded
• 3M adhesive strip on back
• Maximum 12V @ 60mA draw per strip segment
• 3 common-anode RGB LEDs per segment
• LED wavelengths: 630nm/530nm/475nm
• No microcontroller or chip controller ('analog' only!).
5m with an anti-static package
Weight :300g
50pcs per a carton.
Features:
1. LED Sources: 3528 SMD LED
2. Colors: Red, Green, Blue, Yellow, Warm White, Pure White, Cool white
3. Ingress Protection: Non-waterproof IP44
4. Viewing angle: 120 degrees
5. LED Quantity: 60pcs LEDs per meter
6. Working Voltage: 12V DC
7. Power Consumption: less than 4.8W per meter
8. 3 LEDs as a unit, cuttable every unit
9. Using 3M adhesive tape, convenience for using
10. Package: 5meters /Reel
11. Certificate: RoHS approval.
Application:
Cove lighting
Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday, event, show, exhibition.
