Find Verified 200Kw Power Output Pv Inverter With 400 800Vdc Suppliers, Manufacturers and Wholesalers

Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
Intelligentized, modularized, simple structure design with powerful function.
Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
The output frequency can be setting via LCD panel, it’s very convenient for customer.
The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
Low Frequency Transformer, which ensures that inverter has high efficiency.
High conversion efficiency, Max. Efficiency=97%
Adopts black pure aluminum radiator, which confirms the best radiating performance.
Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-400V or 300-800V.
Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
European CE (EMC, LVD) Certificate and accredited by Australian CEC, ERAC energy network.
Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.

Drying Type Garlic Peeling Machine
Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine
The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry .

The remarkable features of the machine are as follows
1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root.
2. Automatically split the garlic and peel it.
3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic.
4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment.
5. The machine is clean and undamaged.
6. The machine also has the characteristics of low power consumption and no noise.
Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!

Meat dicer cutter machine is one of the common machines in the meat processing industry. They can quickly and accurately cut large pieces of meat, such as beef, pork, lamb, or poultry, into small diced pieces for subsequent cooking or process purpose .
Machine size : 1480*800*1000mm 1950*1000*1120mm
Cutting groove 84*84*350mm 120*120*550mm
Cutting grating 5/6/7/8/10/12/14/21/24/28/30mm
working power 3kw/380v 3.7kw/380v
machine weight 500kg 700kg
capacity 500-600kg/h 700-900kg/h
Our meat dicer cutter machine is suitable for large factories, mining enterprises, universities, government cafeterias, central kitchens, fast food companies, food factories, fresh supermarkets, meat product factories, semi-finished product processing and distribution places, etc
304 stainless steel, it can accurately cut into shapes such as dice, silk, and strips. It is an important equipment in the production process of meat products. It can cut the main raw materials such as meat pieces, minced meat, and fat into the diced meat that users need. The size and style of the diced meat are determined by the tool switch, with high work efficiency, large output, easy maintenance, simple tool disassembly and cleaning, and can meet the production needs of a large number of users.

Rated power : 3KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
WIFI remote monitoring (optional)
Compatible to generator
PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power
support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current,
AC/solar charger priority, and acceptable input voltage based on different applications.

Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator

Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
Support parallel operation up to 3 units (available for 3KW-5KW 48V)
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is
150~430Vdc, which Can help customers make full use of solar energy.

Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.

On grid / Grid-tied
Rated power: 4200W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*153mm
Net weight: 13.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 4600W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*173mm
Net weight: 14.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 6000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

Off grid
Rated power: 1000W
Dimension(W/H/D): 225*355*92mm
Net weight: 5kgs
LCD display

This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

On grid / Grid-tied
Rated power: 15000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 12000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 10000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.

On grid / Grid-tied
Rated power: 8000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.