Find Verified 180° Punch Down Keystone Jack (C5E C6) Suppliers, Manufacturers and Wholesalers

Features
Compliant with the IEC60603-7 dimension and reliability requirement
Compliant with the ANSI/TIA-568.2-D Cat.6A requirement
RJ45 8P8C 50u" Jack
22-26 AWG stranded and solid wires range
T568A and T568B wring
IDC re-installing cycles: Min. 20 cycles
ETL Verified

Idc wire gauge: 22-26 awg, solid or stranded
Colour coding: as per 568 a/b standard
Spring wire: phosphor bronze alloy plated with 50 micro-inch of gold over 70-100 micro-inch of nickel
Idc: phosphor bronze alloy with 100 micro-inch 100% nickel plating
Conductor termination: >200
Insulation diameter: 0.7-1.4mm
Flammability rating: ul 94 v-0
Safety rating: ul 1863
Wire: 22-26 awg

FEATURES
1. RJ45 8P 8C 50u jack
2. Slim shape fits 4 port Decora wall plate
3. IDC compatible with 110 punch down tool
4. Quick terminating 8 wires and cutting extra cable with a speedy punch down tool
5. Terminating 4 pairs, 23-26 AWG cable
6. Bright wiring label helps wiring configuration
7. High headroom on Cat.6 permanent link performance

Features
High-Density design for 1U-24 port keystone panel
Compliant with the ANSI/TIA-568.2D Cat.6A requirement
RJ45 8P8C 50u" Jack
23-26 AWG strandred and solid wires range
T568A and T568B wring
Dust prevent shutter

Features
High-Density design for 1U-24 port keystone panel
Compliant with the ANSI/TIA-568.2D Cat.6A requirement
RJ45 8P8C 50u" Jack
23-26 AWG strandred and solid wires range
T568A and T568B wring
Dust prevent shutter

Features
1. UL safety listed
2. DELTA and ETL verified CAT6 and CAT6A component-rated performance
3. DELTA PoE plus 30W IEC60512-99-001 verified
4. IEC60512-99-002 PoE type III 60W and IV 100W capability
5. EEE802.3bt type III and IV application
6. Power over HDBaseT (PoHDBaseT - up to 100W)
7. High quality connectors ensure system reliability and stability by automation line
IEC60603-7 dimensions and structural reliability complied
9. Fits 1U 24-Port keystone panel
10. Dust-prevent shutter

Descriptions    

A "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" refers to a type of network connector that is used primarily in structured cabling environments, such as in Ethernet networks.

Here's a breakdown of what each term typically means:
CAT6
UTP
8P8C
AP style
180 degree
Keystone jack

In summary, a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" is a specific type of connector designed for Category 6 Ethernet cables without shielding, featuring an eight-pin, eight-contact configuration (RJ45), with a specific style (possibly angled pin or other design feature) and a 180-degree termination. These keystone jacks are commonly used in structured cabling systems to provide reliable Ethernet connectivity.


Main Features    

The main features of a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" include:

Keystone Form Factor: The keystone form factor allows for easy snap-in installation into keystone wall plates, patch panels, or other standardized mounting hardware. This modularity facilitates flexibility in configuring and managing network connections.

Reliability and Performance: These jacks are engineered to provide reliable Ethernet connectivity with minimal signal loss, ensuring optimal performance for high-speed data networks.

In essence, the main feature of a "CAT6 UTP unshielded 8P8C AP style 180 degree Keystone jack" is its ability to provide high-performance Ethernet connectivity in a standard form factor that is easy to install and compatible with Category 6 cables. It combines robust construction with specific design features to meet the demands of modern network infrastructure.


Order Data: TP-5209-C6U8
Descriptions: Keystone jack, CAT6, UTP, 8P8C, 180 degree, AP style

FEATURES
*Tool Free Compatible
*Full shielded with Robust zinc alloy housing
*RJ45 8P8C 50u" Jack
*Terminating 4 pairs, 22-26 AWG Cable
*Universal color-coded for T568A and T568B
*Cable outer diameter from 6.0 to 9.0mm
*Reliable and stable by Insert molding and press-fit assembly process
*Fit for 1U/48P patch panel

Cat.8 series

180 Tool Free Keystone Jack Shielded Cat.8 (6A)
Cat.8 S/FTP 24AWG Patch Cord
Cat.8 S/FTP 22AWG Screened Solid Cable
RJ45 Field Terminable Plug (C8/C6A)

Piano type switch
Specifications of piano type switch
2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 10pos, 12pos.
Mechanical
1.Operation force: 800g max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage temp: -40degree to 85degree

Materials
1.Base: engineering plastics, black.
2.Cover: engineering plastics, red or blue.
3.Button: engineering plastics, white.
4.Terminal: alloy copper, gold plating.

Electrical
1.Electrical life: 2000 operations cycles per switch.
2.Non-switching rating: 100ma, 50vdc
3.Switching rating: 25ma, 24vdc
4.Contact resistance: 50mª+ max, at initial;100mª+ max, after life test.
5.Insulation resistance: 100mª+, 500vdc
6.Dielectric serength: 500vcd/1 minute
7.Capacitance: 5pf max.
8.Circuit: single pole single throw.

Soldering and cleaning processes
1.Keep all switch contacts in their "off" position for all operation .
2.Wave soldering: recommended solder temperature at 260degree max.5 seconds for ic type.
3.Hand soldering: use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds, while applying solder.
4.Reflow soldering: reflow zone 240degree for 20 seconds.(for smt type, see the picture)
5.Cleaning process: flux clean using force rinse, high agitation or triple bath cleaning mathod.
Freon tf or te give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.




Packing
All dip switches are packed in standard ic tube.

Rotary DIP Switch
Specifications of Rotary type: 10pos, 16pos ,hexadecimal, decimal, BCD.
ELECTRICAL SPECIFICATIONS
Operating voltage: 24VDC Max.
Contact load,static: 400mA Max.
Contact load,dynamic: 150mA Max.
Initial contact resistance: 80mª+ Max.
Insulation resistance: 100mª+ Min.

Solder recommendations

Hand Soldering:340 degree Max. for 2 seconds Max.
Wave Soldering:260degree. Max. for 10 seconds Max.

PACKING
Switches are packed in standard IC Tube Package,47 pcs per tube,and the accessories are bags.

MECHANICAL DATA
Expected life: 10,000 steps
Position per rotation: 10, 16
Operating temperature: -20degree to 70degree

MATERIALS
BASE: Engineering plastics,Black.

COVER: Engineering plastics,Black.
Actuator: Engineering plastics
Contacts: Alloy copper,Gold over nickel plated

TERMINAL: Alloy copper,Tin plated
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.

Slide type switch

Specifications of Slide type switch:
2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.

MECHANICAL
1.Operation Force: 800g Max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage Temp: -40degree to 85degree

MATERIALS
1.BASE: Engineering plastics,Black.
2.COVER: Engineering plastics,Red or blue.
3.BUTTON: Engineering plastics,White.
4.TERMINAL: Alloy copper,Gold plating.

ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.

SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.
PACKING
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.



All DIP switches are packed in standard IC tube.

Right-angle type switch
Specifications of Right angle type(DS series):
2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.

Mechanical

1.Operation Force: 800g Max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage Temp: -40degree to 85degree

Materials

1.BASE: Engineering plastics,Black.
2.COVER: Engineering plastics,Red or blue.
3.BUTTON: Engineering plastics,White.
4.TERMINAL: Alloy copper,Gold plating.

ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.

SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch



All DIP switches are packed in standard IC tube.

1. Slide type (DS series): 2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 9pos, 10pos, 12pos.
2. Piano type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
3. Right angle type(DS series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,9pos,10pos,12pos.
4. IC type(DP series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
5. SMT type(SMD series): 2pos,3pos,4pos,5pos,6pos,7pos,8pos,10pos,12pos.
6. Rotary type: hexadecimal,decimal,BCD.

Packing

All DIP switches are packed in standard IC tube.
SMT type can be packed in Tape or Reel packing.

24 port cat5e utp patch panel
Oem avaible

1. Design to mount to any standard 19" rack or cabinet.
2. Space saving, high-density 1u (24 port ).
3. L idc contract material: phosphor bronze with tin plating over nickel.
4.110& krone punch down tools are available.
5. Sturdy aluminum plate around rj 45 jacks
6. Phosphor bronze with 5-50 micro inches gold plated.
7. Available with t568 a. T568 b wiring pattern and meeting the requirement of cat 5e standard.


Packing:20pcs/ctn

OpticalCmos size1/3.2¡¡¥¡¡¥ professional cmos
Total pixels850 000 pixel
Line resolution700 tvl
Camera head rotation330
Frame rate24 (fps)
Shooting area260¡¨¢350mm max, 28 x 21mm min.
Signal noise ratio(s/n)50 db
Lens(mm)F=1.6-3.8.F=3.9-85.8mm
Powered zoom16¡¨¢optical/ 8¡¨¢seamless digital ;128 ¡¨¢ total zoom
FocusAuto/manual
IrisAuto
LightingUpper lamp1.5w led lamps(2sets)(80000 lamp hours)
Lower lampBuilt in led lighting box(2w)(80000 lamp hours)
ImagingBrightness adjustmentAuto/manual
Video signalPal/ntsc color system
ResolutionXga (1024*768)
Colour/b&w selectionYes
White balanceAuto/manual
Auto image adjustYes
Text/graphics enhancementYes
Image zoomYes
Image freezeYes
Image rotation360¡ã(up/down)270¡ã(left/right)
(including 90¡ã and 180¡ã degree)
Shapness adjustmentYes
Colour (red-blue)adjustmentYes
Negative/positiveYes
Screen div2Yes
TerminalsVga inputVga(db15 flc) ¡¨¢1
Vga outputVga(db15 flc) ¡¨¢1
Vga output resolutionXga (1024*768)
Rgb output1 pc
Video/audio inputAudio;3.5mini jack¡¨¢2, video :rca¡¨¢1
Video/audio outputC-video;rca jack¡¨¢1, audio mini jack ¡¨¢1
Rs-232 connector1 pc
Power12v/2a dc adapter, 30w
Temperature-10¡ãc--50¡ãc
Folded dimensions(w*d*h)360x450x200mm
Setup dimensions(w*d*h)360x450x500mm
Dimensions(w*d*h)580x460x260mm

3 In 1 NC Servo Straightener Feeder W/Uncoiler

Save Looping Space, Increase Safety Coiled material is from uncoiler through both left and right free guide rollers with advance photo sensors keeps looping. Through the opener device and bending roller system feeding the coiled material from up to down, passing opener device, coil tip flatness device, pinch rollers, work rollers, feed rollers to make the coiled material passing in an excellent smooth feeding

STANDARD ACCESSORY:

Electric eye loop control system

Feed and straightener rolls hard chrome plated

Outgoing catenary to assist and support the material

Hold down arm device

Feeding line easily adjusted by advance worm gear screw jacks device

Uncoiler with inverter control

Reference indicator adjuster

Eccentric Roller (Upper)-easy to set up the up curve or down curve feeding exit direction

Hand-set coil width guide at outlet side

Hand-wheel-adjusted coil width guides at straightener inlet side

Threading table device

Coil tip de-bender

Uncoiler with air disc brake

A-frame type coil keeper



OPTION:

LIHAOS coil car



Features

1. Flexible operation mode: All the functions of the feeder are concentrated on the PLC and a portable knob. The operator can fix all the movement functions of the device in one place.So dont worry about operating or wasting time because there are too many function keys.

2. High efficiency and safety: It reduces unnecessary time and improves work efficiency that mechanical action instead of manual operation. And it has a large number of auxiliary functions of feeding and supporting materials, so that the operator can keep away from the material to the maximum extent.

3. Convenient control mode: Users can freely switch between punch master or device master according to their needs, which maximizes the adaptability of the device and save costs for users.

4. Reasonable footprint: While Lihao NCHF series are powerful, the form factor are also the most reasonable in the industry, which can maximize the cost of the site.

5. Strong control system compatibility: The NCHF series uses a full set of Japanese Mitsubishi control systems, which are compatible with various standards at home and abroad. Users do not need to worry about data conversion and other issues, and can directly operate.

6. Reasonable design: The NCHF series is the first product in the industry to introduce industrial design. While ensuring the basic performance of the equipment, it maximizes the visibility of the equipment and improves the comfort of operation.

Gps car navigator
Product features
Build-in sirfstar·d chipset.
Receiving 20 parallel channels.
Portable navigation device, flip antenna, slim and compact size, can be installed in any model of automobile.
Turn-by-turn features quickly give you the best route to reach your destination.
Touch-screen operation makes for safe driving.
High-quality mp3 playback and high-resolution image display.
Convenient downloading of map information between sd storage media and computer.
262k-color 3.5" tft lcd monitor, the optimal monitor for human eyesight.
Specifications
Integrated gps receiver
20 parallel channels
Handheld software(pre-loaded)
Companion cd: adobe acrobat reader for pocket pc
Centrality atlas processor at 200 mhz. O.S. Microsoft windows ce.Net 4.2
Manual
Memory 32 mb flash memory and 64mb sdram for operating system and embedded applications
Weight < 180 g.
Size 125.5(l)x75.8(w)x21(h) mm (h:26.5 antenna included )
Car holder / charger input voltage : 11v. ~ 28v.
Output voltage : 5.4v. ¼i 0.3v.
Battery rechargeable 1050 mah. Li-ion
8 hours battery life when backlight is inactive.
3 hours to fully charge
Extension slot:sd
Display
3.5" high-brightness & contrast ratio transflective tft lcd (262k colors) with 240 x 320 (qvga) resolution
Led red/green led for battery charging status
Audio built-in 15 mm speaker and stereo earphone jack
Operation temperature 0f- ~ 55f-
Storage temperature20f- ~ 70f-
Proprietary 24-pin connector:usb client ; dc power in
Special keys and buttons: 5-way directional pad (up, down, left, right, enter) ; four quick-launch application buttons

Weight < 180 g.
Size 125.5(l)x75.8(w)x21(h) mm (h:26.5 antenna included )