Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves
One-time use, no sterilization, no latex
Single use, non-sterile, Latex free
Model: S, M, L, XL
Sizes: S, M, L, XL
Color: blue, green, black, etc.
Color: Blue, Green, Black etc.
Structure: 5 fingers, with curling, regardless of left and right hands
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface type: smooth surface
Surface: Smooth
Features :
PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and
The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with
PVC paste and Nitrile latex, and the finished product has the advantage of
both PVC and Nitrile glove.
The donning feeling is better than vinyl gloves.
Much softer than vinyl gloves
Sturdy, wearable, longer wearing time than nitrile gloves
The wearing time is longer than nitrile gloves.
Has good wet hand wearability, easier to wear than nitrile and PVC gloves
Easy donning with wet hands and easy donning than nitrile &vinyl gloves.
PU coating, free of protein, effectively reduces the risk of allergies
PU coating, with no protein in it, allergy risk is reduced effectively.
Has better protection, has better acid resistance, alkali resistance and oil resistance
Better protection, good resistance of acid, alkali and oil.
Better cost-performance
Our Wood Coating is one of the best seller products. Based in Mumbai, Maharashtra we offer a huge variety of 15 natural stains that have been especially specially formulated with the superior quality solvent based fast drying stains that aid in accentuating the natural beauty of the wood grains. Wipe and fill the surface and further smooth sand the surface with a 180 grit paper. Next, apply stain with muslin cloths in addition to the grains. Further let the surface dry for about 30 minutes before the application of the finish coat. You can mix the stains with the NC/ melamine finishes approximately 20% by volume, if required. Never mix the stains woody or PU finishes. We are the leading exporter, supplier and manufacturer of Wood Coatings.
Polyester powder coating is a thermosetting powder coating based on saturated Carboxylated polyester resins especially selected for architectural use It has good flow and excellent resistance to atmospheric ageing environment. This powder coating product is applicable for electrostatic application.
4393 13G Polyester Liner With Pu Coated 3131X Suppliers
Short on time? Let 13G Polyester Liner With Pu Coated 3131X sellers contact you.
Polyester powder coating is a thermosetting powder coating based on saturated Carboxylated polyester resins especially selected for architectural use, it has good flow and excellent resistance to atmospheric ageing environment. This powder coating product is applicable for electrostatic application.
Product meets most of the international requirements and specifications As Qualicoat [P-1864]
Polyester powder coating is a thermosetting powder coating based on saturated Carboxylated polyester resins especially selected for architectural use It has uniform pattern and excellent resistance to atmospheric ageing environment. This powder coating product is applicable for electrostatic application.
Polyester powder coating is a thermosetting powder coating based on saturated polyester resins especially selected for architectural use. It has good Structured Textured Pattern and excellent resistance to atmospheric ageing environment. This powder coating product is applicable for electrostatic application.
Palm Coated Nylon PU Gloves Polyurethane Palm Fit Safety Work Gloves
Decoration: According to Customer Demands
Features: Eco-Friendly, Breathable, Quick Dry, Plus Size
Colors: Custom Colors
Logo: Customized as Per Customer Demand.
Sizes: We Can Customize the Sizes and Measurements as Per Customer Demand. In
Other Case, We Can Offer UK Sizes, USA Sizes, European Sizes, International
Size Options. High Quality Arm Warmer Crochet Fingerless Gloves, Breathable, Durable, Comfortable,
Prices of Orders: Depending on Quality, Order Quantity, Product Design
Sample Lead Time: Within 2-5 Days (Depend on Style)
Sample: Samples Charges Will Be Apply, But Freight Is Free
Shipping: By Sea, By Air, By Ship, Express
PP8000SH
POLYESTER PUTTY - HEAVY
A combination of a special unsaturated polyester resin with a selected quick setting for subsequent coats for the complete Ritver paints system.
PP8004
POLYESTER PUTTY - LIGHT
A lightweight two-component Polyester based putty, formulated to exhibit very good adhesion and high elasticity.
This product is suitable for large surface areas; is easy to apply and provides excellent sandability.
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries
Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
KN95 New
US$ 0.455 - 2.58 / Piece
10000 Pieces
Minimum Order : 3 - 30 days
Product Details
Model Number : KN95 Protective Mask-#5340
Brand Name : WinHealth (Future)
Origin : China (mainland)
Small Orders : Accepted
Key Specifications/Special Features:
KN95 Particulate Respirator
CE FDA Certificate
Over 95% effectiveness in filtering non-oil particles
Product Introduction
KN95 masks have over 95% effectiveness in filtering non-oil particles. For use primarily for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances.
The inner and outer covers of KN95 masks are constructed from spunbond nonwoven fabric.
Polypropylene melt-blown nonwoven is layered between the inner and outer covers. The ear loops are made of polyester elastic which is attached to the mask. The inside nosepiece is a polypropylene or PU foam.
Product Specifications
Product Size Specification and Appearance Requirements
Product Appearance and Materials
Specifications of KN95 Mask
NameParameter
Product name - KN95 Particulate Respirator
Material - Spunbond nonwovens, melt-blown nonwovens, hot air cotton, nose clip, elastic ear loops
Model - Foldable
Size - 110 mm*160 mm /4.33in.*6.30in.
Product application scope and purposeMainly used for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances.
Expiration date - 3 years after production
Packaging specification - 2pcs/bag; 50pcs/box; 1000pcs/Carton
Usage instructions1. Hold the ear loops in both hands with the metallic strip up.
2. Put the mask against your face covering both nose and mouth. Place ear loops around both ears.
3. Adjust mask over nose and under chin.
4. Adjust the flexible strip over bridge of nose.
5. Make sure the mask fits properly, covering the nose, mouth and chin.
StorageStore in a cool, dry, clean place away from fire.
Store between -20â?? and 38 (-4 F and 100 F) with relative humidity below 80 %
Standards
KN95 mask complies with the national standard GB2626-2006 CE FDA Certificate Self-Priming, Filter-Type Mask for Respiratory Protection. This standard specifies the technical requirements, testing methods and manufacturing procedures of the mask.
4393 13G Polyester Liner With Pu Coated 3131X Suppliers
Short on time? Let 13G Polyester Liner With Pu Coated 3131X sellers contact you.
