Key features:
Dc3.3v ~5v power supply, uart-ttl interface
Compliant with iso14443a standard,
Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc
Available with e-wallet increment, descrement, backup value, etc
External antenna, reading range up to 5 ~ 7cm
External led and buz available ( external driver circuit needed)
Technical Parameters:
Electrical Specification
Power supply DC 3.3V ~ 5V
Power consumption Max current
Key features:
Dc3.3v ~5v power supply, uart-ttl interface
Compliant with iso14443a standard,
Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc
Available with e-wallet increment, descrement, backup value, etc
External antenna, reading range up to 5 ~ 7cm
External led and buz available ( external driver circuit needed)
Technical Parameters:
Electrical Specification
Power supply DC 3.3V ~ 5V
Power consumption Max current
YW-605 is a contactless card reader/writer. User can Operate contactless card by API of DLL. this Reader supports ISO14443A, ISO14443B, IS)15693.
User can easily use the Reader by the DLL. there are demos in VB,VC,Delphi, C++ BuilderC#.net, WEB Client etc.
Frequency: 13.56M HF short distance
support card type: Mifare S50,S70Mifare ProISO14443A, ISO14443B ISO15693 and others.
Feature: RS232 and RS485 Baud19200BPS
Example VB,VC,Delphi, C++ Builder C#.net, WEB Client, Beeper+LED+1SAM slot.
Power DC5V10%
Max 1.5W
Temp. -10 +70
Humidity 35% 95%
Size 120 * 84 * 25 (mm)
Weight100g.
Name mobile express card reader / writer
Certification ce,fcc,rohs,mic
Explain features
-plug and play setup,hot swappable -support usb port power -card supported:
1) ms/ms pro/ms duo/ms pro duo/ms mg pro/ms mg/ms mg duo/ms
Mg pro duo/extreme ms pro/extreme iii ms pro/hs ms pro/hs ms
Pro duo/ms rom/ms select
2) sd/mini sd/hs mini sd/extreme sd/extreme iii sd/ultra ii sd/sd-
Ultra-x/ultra speed sd/sd pro/sd elite pro/hs sd/ xd card
3) mmc/mmc 4.0/hs mmc/hs rs mmc/rs mmc/rs mmc 4.0/mmc
Mobile/mmc micro/micro sd/t-flash
4) cf card
5) m2 -auto detect card memory. -up to 480mbps
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC400, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default ON
SAM card slot: 1 slot, 9600bps /38400bps
EEPROM: 512 Bytes
PPSS set: Supported
Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order)
Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: 5.0V
Power consumption: 150mA
Dimension: 70mm¡Á50mm¡Á16.5mm
Weight: about 120g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
ISP: Supported
RoHS: Compliant
Dc5v power supply from usb; usb com port;
Compliant with iso14443a/b, iso15693, iso7816 t=1 standard;
Support read/write contactless series cards and contact smart sam cards.
Embedded with one smart contact card socket under iso7816 t=1 standard;
Available to operate desfire picc level, application id create/delete/format, etc
Support to create standard datafile&backupfile, and valuefile, recordfile, etc
Dimension with 80mmx84mmx12mm,
Internal led&buz for status indication, one smart sam card socket.
Technical parameters:
Electrical specification
Power supplydc 5v from usb
Power consumption max current
Key features:
Dc3.3v ~5v power supply, uart-ttl interface
Compliant with iso14443a/b, iso15693 standard,
Support mifare classic 1k /4k, mifare ultralight/ultralight c, mifare pro, iso14443a-4 contactless cpu card, i code sli, ti 2048, etc
External antenna, reading range up to 5 ~ 7cm
External led and buz available (external driver circuit needed)
Technical Parameters:
Electrical Specification
Power supply DC 3.3V ~ 5V
Power consumption Max current
Key Features:
3.3V ~ 5V DC Power supply, RS232 or UART TTL;
Compatible with ISO14443 A/B, ISO15693 ,ISO7816 T=0 PSAM card standard
R/W MIFARE Classic 1K /4K, MIFARE Ultralight/Ultralight C, MIFARE DESFire, ISO14443A-4 contactless CPU card, I CODE SLI, etc
Internal with 4 PSAM socket
External antenna with 1.25 2P connector/IPX, reading range up to 5~7 cm
Internal BUZ available for indication
Technical Parameters:
Electrical Specification
Power supply DC 3.3V ~ 5V
Power consumption < 150mA
Operation frequency 13.56MHz
Baudrate 9600~115200 bit/s ( default 115200bps)
Interface UART TTL or RS232
Antenna External with 1.25 2P connector or IPX
Reading range 50- 70mm (depends on tag and antenna size)
Mechanical Specifications
Dimension 76mmx50mmx2.8mm (LxWxH)
Weight 10g
Material FR-4, Blue
Model CHK362MT
Environmental Conditions
Operation temperature -20 to +80 degree
Storage temperature -40 to +85 degree
Humidity Relative humidity 5% to 95%
Supported Standard/ Tags
ISO14443 A Read/write:
MIFARE Classic 1K /4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE DESFire EV1, MIFARE Smart MX, MIFARE Plus S / X, MIFARE Pro X, NTAG 21x
Read UID only:
Read UID only of all other ISO14443A RFID tags
ISO14443 B SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176
ISO15693 EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity)
ISO7816 PSAM T=0, T=1 standard
SDK information
Demo software Windows, C# program language
Files Comprotocol document
API document
User Manual
Demo.exe
Act-a6 series motorized card reader/writer supports rf/ic card r/w and magnetic card r, which is a product created from many years of technology and experience accumulation of act and the market demand.
Act-a6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly led; all these enable act-a6 to better meet the market requirements for motorized card reader/writer.
IVF-RH101 reader elf is a portable mini reader that can link with ios, android, wp etc, Intelligent system platform through 3.5mm headphone jack to use. It has the characteristic of plug-and-play, light and small size, low power consumption, built-in rechargeable battery, etc, and is easy to carry, truly make mobile identify tag at any time, anywhere, as you wishes. It¡¯s applicable to anti-counterfeiting terminal device, etc
parameter specification:
1).Support high frequency (HF) label agreement
2).Support ios, android, wp, etc Intelligent system platform
3). Material: ABS + PC engineering plastic
4). Weight: 12 g
5). Battery capacity: 130 ma
6). charge modeMicro USB 5V/0.5A
7). operating ambient temperature: -20~60
8). indicator light condition:
Normal work: green light for long
Abnormal equipment: light not on
Low electricity quantity: green light flashing(Slow flash: low power alarm; Flash: stop using low electricity)
Charging: red light for long
charge complete: green light for long
9) Communication interface: 3.5mm audio interface (Ordinary headphone jack)
Model: JMY680H
1.Product introduction
JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna.
2.Characteristics
PCD model:NXP CL RC632
Working frequency: 13.56MHz
Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1)
Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only
Auto detecting card:Supported, default OFF
SAM slot:1 slot
SAM baud rate:9600bps/38400bps
ISO7816 PPSS set:supported
EEPROM:512 Bytes
Power supply:DC 5V
Interface:IIC/UART/RS232C (select when place order)
Communication rate:IIC:400Kbps
UART: 19.2Kbps/115.2Kbps
Max. command length:254 Bytes
Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance)
Power consumption: 150mA
Operating distance:150mm (depending on card)
Dimension:70mm*50mm*16.5mm
Weight:About 120g
ISP:Supported
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
RoHS:Supported
3.Protocol
There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system.
4.Automatic detecting card
The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation.
Inner package: box (size: 17.5*14*7cm)
Outer package: carton (size: 48*32*24mm)
Weight: 330g
Terms of delivery: dhl, tnt
Delivery time: 5 working days after receive payment.
ER70 QR Code Wiegand 26 or 34 EM or Mifare RFID Reader can be compatible with all Door access control board.The user can open the door by RFID card or Mobile QR code.
Voltage: Support 4-15V
Input: Current: 800mA.
Reading directions:
Camera centric slant 45.
Reading speed:
Product Description
CJT-A6 series motorized card reader/writer supports RF/IC card R/W and magnetic card R, which is a product created from many years of technology and experience accumulation of ACT and the market demand.
CJT-A6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly LED; all these enable CJT-A6 to better meet the market requirements for motorized card reader/writer.
Product Features
*EMV and PBOC certified.
*Supports ISO7810/7811 magnetic card reading only.
*Supports ISO7816-2 contact IC card reading/writing.
*Supports ISO14443-A Mifare Type A/B card reading/writing.
*Jitter card-in function: effectively precludes unauthorized card reading.
*Protruding bezel: for anti-theft is available
*Bezel with LED light: provides card insertion indication and/or lighting and prevents the card being left inside.
*Independent sensor design: makes reader maintenance easy.
*Dustproof sensor lens: prevents sensor from dust and/or the other foreign materials.
*Mechanical shutter for protection against dust and/or the other foreign materials in the bezel position: enhances the reliability of the card reader.
*Four-set driving wheels: ensure the card transmission stability and liability and prevent card jam or block.
*One group of driving wheels in front of mag-head: enables automatic re-reading, which increases success rate of card reading.
*Card detecting function: automatically handles abnormal cards (broken card, incomplete card, etc.) and is able to eject card in case of power failure.
*Self-balancing mag-head reading function: provides stable reading and easy maintenance.
*High-performance plastic materials: ensure reading precision and product consistency.
CUSTOMIZABLE
We can make products according to your needs.
