Find Verified Wire Rods Suppliers, Manufacturers and Wholesalers

tire scrap wire . wire tire scrap , derived from scrap tires with impurities of carbon 1000MT in stock available to ship. Sample could be provided upon request.

brass coated steel wire for hose wire
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to

Advantage of
brass coated steel wire for hose wire
--------
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support
brass coated steel wire for hose wire
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com

brass coated steel wire for hose wire
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
Advantage of
brass coated steel wire for hose wire

This is offered in different models and in various dimensions, with top or side entry configurations which might suit your specific needs.

Over-molded Shell Feature Designed for High Density, High-Speed Harness
Manufactured with higher infill housing, the 2.0mm connector is suitable for high-density and crowded applications, withstanding higher strain and mechanical stress.

Wire formed parts or wire forms, often called metal spring clips can produce tensional and torsional movment. Wire bending can be made into virtually any shape desired. Made from your drawing, CAD data, or samples as a one off or large production run, available in a wide range of materials and finishes.
Some of our wire products include clips, coils, display stands, fittings and fixings, hooks, baskets and welded wire fabrications.

Annealed Tie Wire for Easy Baling

There is a coil of annealed wire on white background.
Annealed tie wire is a kind of baling wire used in farming, construction and daily life.

Annealed wire also named annealed tie wire, a kind of baling wire widely used in daily binding, mesh weaving, crafts making, etc.

Material: carbon steel wire.
Technique: thermal annealing.
Mechanism: Annealing is aimed at returning the ductility of wire which it had lost during drawing.
Production facility: annealing pot, annealing furnace.
Wire diameter: 0.71mm - 4.5mm.
Wire gauge: 7 - 22 gauge.
Types: black annealed Wire, bright annealed wire
Features: good softness and elasticity, high tensile strength, excellent ductility, etc.
Applications:
Used in mining, chemistry, machinery.
Used in making mesh, crafts.
Used to bundle rebar in construction.
Used as tie wire in farm, garden and daily life.
Our annealed products can be painted with oil on the surface to prevent it from rusting and also can be further straightened and made into cut wire or U type wire according to your specific requirements.

Black annealed wire
There are three coils of black annealed wire.
Black annealed wire has excellent flexibility and softness performance.

Black annealed wire also named black annealed tie wire, a type of annealed wire applied in construction, industry and so on.

Materials: Iron wire or carbon steel wire.
Tensile strength: 30 - 50 kg/mm2.
Features: excellent flexibility and softness, high elongation.
Application:
Used in wire mesh weaving.
Used as baling wire in construction, industry, daily life.
Applied in agriculture, such as baling hay, branches.
Used for making handcrafts.
Packing: in coils or spools, 10-200 kg/coil, plastic bag inside and hessian/woven cloth outside.
Bright annealed wire
Bright annealed wire also named bright annealed tie wire.
Features: bright, smooth, beautiful.
There is a coil of bright annealed wire on the ground.
Bright annealed tie wire usually used to tie rebar in construction.

Many annealed wires packed with plastic bag in coiled form.
Annealed wire can be delivered in coiled form.

Model Number:UL1332 AWG22
Type:insulated
Application:Electrical household appliances,Lights,Small motors
Conductor Material:Tinned copper
Conductor Type:Stranded
Insulation Material:FeP

1. Peak temperature: 250 max.

2. Heating area: 230 min. for less than 60 seconds

3. Preheating area : 170 to 190 for 60 to 120 seconds

Compactness
The mounting height of the connector is just about 16.5mm after connecting it to the circuit. This feature makes it the most compact connector of all.

High current carrying capacity and high withstanding voltage
The connector can carry current up to 10 A through it. This gush of current is more than sufficient for any electronic device. This connector has a high voltage withstanding capacity of 1500 V AC per minute.

Locking mechanism

Buy SAW Wire Submerged Arc Welding Wire. If you're looking for a high-quality wire to weld with, look no further than AWS EL8 SAW Wire Submerged Arc Welding Wire. This wire is made from chrome-molybdenum alloy, which makes it strong and durable.

High Durability with Terminal Protection Assurance (TPA) Technology
Utilizing Terminal Protection Assurance(TPA) Technology, STC manufactures Molex Mini-Fit 4.2mm with enhancements in its connector housing and contact design to help prevent connection failure. TPA designs offer overlooked connection solutions by providing locking redundancy. This promotes a durable connector design in which terminals can be inserted properly without degradation from unnecessarily exhausting them with thousands of insertions.

Equipped with Reduced Mating Force (RMF) Solutions
Like Molex Micro-Fit, the MIni-Fit Jr is equipped with RMF solutions for lower friction solution between the contacts of the device and the socket, making insertion and removal of the device easier, while at the same time eliminating the need for complex mechanisms such as in ZIF sockets.

Designed for Blind-Mating Applications

The thread rolling wheel is a tool for rolling out threads by means of metal plastic deformation on the thread rolling machine.

Karma is made up of chrome nickel, Alumium and iron as the main conponents.The  resistivity is 2~3 times higher thanmanganin. 
It has lower temperature coefficient of resistance(TCR), lower thermal EMF versus copper, good permanence of resistance for a long period of time and strong anti-oxidation.

Product name Automotive Engine Wire Harness
Specification Base on custom product/drawing
Wire harness Sheath Corrugated pipe, braided pipe, Rubber, heat shrinkable tube.etc.
Connector Range
Thousands different connectors available(1 pin to 40 pin to custom.)
Application Engine (Trailer/truck/ diesel /marine etc)
MOQ 1000 set. If very large wiring harness, 500 set.accept
Wire gauge 2 AWG to 28 AWG
Certification T/S16949,IATF16949, and UL /RoHS.
Wire length Custom
Terminal Brand number and terminal block
Delivery Time Enough stock and strong production capacity ensure timely delivery.
Assembly Connector+terminal+sheather+ wire + other connect plug Service
custom (OEM/ODM),please provide draiwng or sample

PSF0716. Portable / wall-mounted 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V 15%,16A,3.5kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Output power: AC240V / 50 HZv;
Output power: 16A,3.5KW; four gear adjustable (16A / 13A / 10A / 6A);
Charging reservation time: 2H / 4H / 6H / 8H;
Leakage protection current: 23 mA;
Leakage protection action time: 32ms;
Standby power consumption: 4W;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug;
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card;
Working life of connector machinery: 10000 times (no-load plugging);
User interface and control: APP control, button control, card control;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Charge Gun SAE J1772/IEC 62196-2
Product certification: 3C, CE, ROHS, REACH, cULus.

Product features:
1.APP control:
Set the current: When the current grid is overloaded, you can set the current
Control to stop and start: Control your phone to stop and start, and you can control it anywhere
Charging reservation: If you want an electric car to charge at night, charging reservations through the APP is a good choice, very convenient
Record: You can view the charging record through the APP at any time
2. Load balance management:
Limit the total charging load can protect the local grid
Sharing the charging load can reduce the cost of the power connection required
Choose the open CT (current transformer) as the current sensor, there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost
3. Specifications:
The body material adopts thermoplastic (insulator combustible UL94 VO) special integral molding, which is suitable for indoor and outdoor safety
Highlight LCD display current, voltage, power consumption, time, etc
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization
Multi-function installation wall installation or base application
4. Protection:
High-quality, safe and reliable use of production design standards: overvoltage, overvoltage, overload, short circuit, leakage, grounding, overtemperature, surge and other protection
Multi-function installation wall installation or base application

Step Price (FOB):
1. Sample unit price is USD304.54
2. 200set, USD182.72
3. 400set, USD164.45
4. 600set, USD148.00
5. 800set, USD133.20
Remarks: Free shipping charge for samples.