Find Verified Wire Mesh Suppliers, Manufacturers and Wholesalers

FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.

Board width: 30-400MM
Tin furnace capacity: 200KG
Normal power / total power: 2-5KW/10KW
Starting power: 7KW
Machine size: 3050*1160*1360
net weight: 400KG
Transport motor: 3Ph 380V 60W
Transportation speed: 200MM-1800MM/Min
PCB transportation method: From left to right
power supply: 3Ph 380V 50HZ
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be switched at any time
2, Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3, With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4, Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con veyor directly
7, Stainless steel long shaft pin chain conveyor, never abra-
sion
8, Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9, Moving speed will not be influent by air pressure.
10, Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11, Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12, Cavesr apeathat at eftef mexdire

The wire drawing machine is a heavy duty wire drawing machine, engineered for the drawing of high strength, high performance steel wire.
Our steel drawing machinery has a whole list of functions including an advanced user interface and a highly reliable motor overheating protection device.
Reduction rates per cross section are % 18 - % 25.
Engine power per each head 30 kw. 380 volt. Triphase.inverter speed controlled.
Wire feeding with clamp is maintained by low revolution pedal. Heads are special alloy gg 25 chrome reinforced cast iron.

JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.

Rivet welding China-Welding processing China-ZhunFeng Heavy Industry (Dalian) Co., Ltd. is located in Yongjun Road of Jinzhou District,Dalian, was founded in 2010, professional engaged in sheet metal , riveting welding and laser cutting processing.
Having 8*4 metres bending machine, 160 tons * 4 meters shearing machine, Large floor type boring machine, CNC lathe, Machining center, CNC Medium Speed Wire Cut EDM, EDM machine tool, Electric welder, Two oxygen welding machine, Argon arc welder, Plasma cutting machine, 15000W laser cutting machine, 425 type sawing machine, 80 tons punching machine ect ,total more than 60 devices.The annual production and processing capacity is 300000 pieces.

The company perennial provide riveting processing, laser cutting services for Dalian Port Group, Intel, YKK, TDK and other well-known enterprises .

Business scope: Sheet metal processing, Riveting processing, Laser cutting processing, Machining, Plate Cutting , Bending, Argon arc welding, Welding copper, Welding aluminum, Titanium alloy welding, Various types of white steel products, Sheet Metal Parts China, Laser Cutting China, China machining factory, Thin plate electronic control cabinet products, Connectors, Stainless steel products, China welding, China machining, Aluminum and aluminum alloy welding products, Dust cover, Distribution box, Equipment shell, Frame welding, Structural parts and so on.

Mig welding filler wire

Welding chiller is a special industrial process chiller for cooling welder machine or welding process. TopChiller is a leading welding chiller manufacturer with 20 years experience.
A welding machine is very important for modern industry including: resistance welder,spot welding, projection welding, seam welding, butt welding and flash welding.

Water cooling plays an important role in the welding process and the welder machine. As we all know, there is boring heat during the welding process.

If we dont remove the heat timely, it will cause harm to both the welding machine and the welder.
Welding chillers can take away the excess heat from the welding machine and welding guns during welding processing to keep it safe and in good working conditions.
TopChiller offers a complete line of industrial chillers available for welding machines and welders including resistance welding machine, spot welding machine, and a laser welding machine.
The welding chiller with a cooling capacity range from 1 to 40 tons, 3KW to 180KW and temperature stability of +/-0.5 to +/-2.
Each welder water chiller is self-contained, closed-loop or open-loop depending on the project requirements, with pumping and piping system.
All welding chillers designed and manufactured by TopChiller features non-ferrous water circuit construction consisting of a stainless steel water pump, stainless steel evaporator, energy efficient and reliable scroll compressor, R407c ozone friendly refrigerant charged before delivery.
As a leader of welding chiller supplier, TopChiller is willing to provide all technical support for your welder and welding machine.
TopChiller is a professional welding chiller manufacturer, TopChiller has exported many welding chillers to the Philippines, Australia, New Zealand, Malaysia, Singapore, Indonesia, Chile, Mexico, Costa Rica, Brazil, Argentina, Colombia, South Africa, Nigeria, Saudi Arabia, Dubai, Spain, Italy, etc.
If you are looking for a reliable welding chiller supplier in the market, TopChiller is your best choice.
Just contact TopChiller sales, and tell all the chiller requirements to get a free quotation for your welding machines.

PRODUCT INFORMATION:
Welding wire diameter: Φ0.7-Φ2.5(mm)

Voltage: 380v -415V 3 phase electric 50HZ(customized)

Mesh size: 1/4-4

Power: 85KVAX6

Mesh width: 600-2100(mm)

Dimension: 2400Ã?1800Ã?1450 (mm)

Welding speed: 80-120 times / min

Machine weight: 2100kg

ADVANTAGES:
reasonable design,low noise,stable working,easy operation and electro-magnetism speed adjustment.

we supply wedge wire screen panels, tubes, pipes, cylinders,water nozzle, header nozzles, resin traps,etc.

Our main products: 3d panel machine line, EPS machine line, wire mesh welding machine line, automatic expanded metal mesh machine, wire straightening and cutting machine and so on. In addition to the standard specification, we also accept special requirements from our customer, so please come to us if you have the needs.

Advantage:High speed, high matching, high-end models, provide customized, can make the ultimate efficiency, suitable for medium, large, ultra-large jet production companies
Specification:
Model:TOP3400C
Size:63*48*39cm
Net weight:25KG
Gross weight:35KG

Product parameters:
Power:3600W
Voltage:230VF
requency:50/60HZ
Welding thickness:0.2-3mm
Fan:DC Fan,stronger wind,more uniform air
Temperrature ranger:0-700â??
Walk Speedï¼?1-15m/min(20-25/min available)
Auto-dormancy control:protect heating element,make machine lifetime longer
Laser:laser positionning line,more accurate
Handrial:standing to operate,move maching conveniently
Welding width:2-4.5(wheel width 4.8th)
LED light:more convenient work in night
Temperature control:digital temperature control,digital dispaly,temperature float±1â??
Heating element:Top 3400c is Leister heater.
Scope:banner,tent,waterptoof,tarpaulin and so on.

china coal 0001
Introduction of XTGWH Automatic Steel Mesh Welding Production Equipment
This automatic steel mesh welding production equipment is used for high-speed, high-speed railway decks, built-in nets, high-rise building nets and other products for special network fraudulent welding, welding diameter 2.3mm ~ 13mm, mesh maximum width of 4 meters, the length can be cut according to the length of the user cut, the machine adopts synchronous control system, sub-control welding rain sister time is controlled by PLC digital programming system, the operating system is touch screen or button, the operation is more intelligent, rational, and has a compression, sub-welding The characteristics of the aircraft welding power is electric, using servo motor hopper, servo motor drive car pull network. Longitudinal ribs are automatically modulated and the transverse ribs are cut off by a straightening machine.
This equipment is the most advanced welding equipment for motor integration. The biggest advantage is that the vertical bars are adjustable. The aperture of the cross bar can be input to the computer to achieve the aperture you have reached. If you want to change the welding distance in the welding network. , you can enter the hole pitch into the computer will be able to reach the hole you want, the hole pitch can be adjusted.
Structure of XTGWH Automatic Steel Mesh Welding Production Equipment
Lightweight wire rod pay-off mechanism
Wire mechanism
Longitudinal rib straightening mechanism
Traction Mechanism
Intermittent Longitudinal Reinforcement Compensator
Precision Straightening Mechanism
High-Performance Weld Host
Automatic Feeding Mechanism for Horizontal Bars
Mesh Shear Mechanism
Mesh Automatic Collection Mechanism

china coal 0001
Introduction of CNC Steel Bar Reinforcing Roll Cage Welding Machine Rebar Machine
The main reinforcement of the hopper cage is automatically fed to the feeder frame through the automatic feeding of the main reinforcement of the hopper frame through the fixed disk catheter and the main reinforcement is fixed on the moving plate catheter via the electric tool. And then move the disk and move the disk synchronously and move the disk in accordance with the pre-set speed (walking speed can be adjusted according to the skilled proficiency of the operator) forward, while welding, and thus Produce finished steel cage.
I steel cage cage equipment to introduce the latest European technology, reinforced cage diameter error can be controlled within 1cm; 1 meter length of the reinforcement cage spacing error can be controlled within 5mm; production efficiency is made of steel cage 3-4 times, equipment Operators only need 3-5 people, the finished product reinforced cage main reinforcement, uniform spacing, solder joints full, solid, can achieve supervision and exemption.
Parameter of CNC Steel Bar Reinforcing Roll Cage Welding Machine Rebar Machine
model XT6-15Automatic XT6-20Automatic XT-6-25 Automatic XT6-40Automatic
Rebar cage maximum diameter (mm) 1500 2000 2500 4000
Rebar cage minimum diameter (mm) 500 500 500 600
Rated power (kw) 18 20 22 30
Average power consumption (kw/h) 8 10 12 18.5
Main rib diameter (mm) 12-32 12-32 12-32 12-32
Stirrup diameter (mm) 6-16 6-16 6-16 6-16
Rebar cage length (mm) 12000-27000 12000-27000 12000-27000 12000-27000
Welding method Manually selectable Manually selectable Manually selectable Manually selectable
Rebar cage maximum weight (kg) â?¤6500 â?¤7500 â?¤8500 â?¤12000
Total weight (kg) 18.0t 19.2t 21.5t 35t
Main frame dimensions (m) 35m*2.2m*3.2m 35m*2.7m*3.3m 35m*3.2m*3.5m 37m*5.2m*5.6m

Water hammer refers to the phenomenon that occurs in the piping system with abrupt opening and closing of valves. To prevent explosion of the pipes, water hammer arresters are required. Jinmai Technologies possesses the sophisticated technology for the production of water hammer arresters that are in full compliance with PDI WH-201 Standard, producing the most optimal efficiency and endurance.
- Stainless Steel Body: Corrosion Resistant
- Stainless Steel bellows operated piston: highest efficiency
- Standard: PDI WH-201 Standard Certificate secured
- Operating Pressure: Safety guaranteed up to 400 P.S.I.G.

tech data of micro flame welder-105T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =100 L/H
electrolytic cell volume: 1.8 L
feeding cell volume: 1.2 L
max. water adding: 2.4 L
no.of electrolytic cell: 1
no.of feeding cell: 1
gross size: 44 cm � 31 cm � 54 cm
gross weight: 14 kg

tech data of micro flame welder-205T
power input: AC 220V�10% or AC 11
0V�10%
frequency: 50H Z/60HZ
gas output: =200 L/H
electrolytic cell volume: 3.6 L
feeding cell volume: 1.5 L
max. water adding: 4.2 L
no.of electrolytic cell: 2
no.of feeding cell: 1
gross size: 53 cm � 31 cm � 54 cm
gross weight: 17 kg


tech data of micro flame welder-305T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =300 L/H
electrolytic cell volume: 5.4 L
feeding cell volume: 1.8 L
max. water adding: 6.3 L
no.of electrolytic cell: 3
no.of feeding cell: 1
gross size: 65 cm � 31 cm � 54 cm
gross weight: 22 kg


tech data of micro flame welder-405T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =400 L/H
electrolytic cell volume: 7.2 L
feeding cell volume: 2.2 L
max. water adding: 8.4 L
no.of electrolytic cell: 4
no.of feeding cell: 1
gross size: 77 cm � 31 cm � 54 cm
gross weight: 26 kg

tech data of micro flame welder-605T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =600 L/H
electrolytic cell volume: 10.8 L
feeding cell volume: 3.6L
max. water adding: 12.6 L
no.of electrolytic cell: 6
no.of feeding cell: 1
gross size: 107 cm � 33 cm � 56 cm
gross weight: 47 kg

tech data of water welding machine-105T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =100 L/H
electrolytic cell volume: 1.8 L
feeding cell volume: 1.2 L
max. water adding: 2.4 L
no.of electrolytic cell: 1
no.of feeding cell: 1
gross size: 44 cm ï 31 cm ï 54 cm
gross weight: 14 kg

tech data of water welding machine-205T
power input: AC 220Vï10
% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =200 L/H
electrolytic cell volume: 3.6 L
feeding cell volume: 1.5 L
max. water adding: 4.2 L
no.of electrolytic cell: 2
no.of feeding cell: 1
gross size: 53 cm ï 31 cm ï 54 cm
gross weight: 17 kg


tech data of water welding machine-305T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =300 L/H
electrolytic cell volume: 5.4 L
feeding cell volume: 1.8 L
max. water adding: 6.3 L
no.of electrolytic cell: 3
no.of feeding cell: 1
gross size: 65 cm ï 31 cm ï 54 cm
gross weight: 22 kg


tech data of water welding machine-405T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =400 L/H
electrolytic cell volume: 7.2 L
feeding cell volume: 2.2 L
max. water adding: 8.4 L
no.of electrolytic cell: 4
no.of feeding cell: 1
gross size: 77 cm ï 31 cm ï 54 cm
gross weight: 26 kg

tech data of water welding machine-605T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =600 L/H
electrolytic cell volume: 10.8 L
feeding cell volume: 3.6L
max. water adding: 12.6 L
no.of electrolytic cell: 6
no.of feeding cell: 1
gross size: 107 cm ï 33 cm ï 56 cm
gross weight: 47 kg

Micro flame polisher is a portable gas generator, and acknowledged as an extremely safe, reliable and cost effective way of producing a oxyhyrogen flame about 3000 degree centigrade replacing acetylene or natural gas or other fuel. It has been exported to usa, germany, france, ireland, australia and so on .
Features:
1., low cost and obtained easily: just little water and little electricity
2., no air pollution:the only products of cumbustion is water vapor
3., absolutely safe: have temper arrester, pressure control, overpressure protection equipment
4., high shock resistance manometer and digital display ampere meter
5., fast start up time is only 30 seconds
6., covered by full service and spare parts support
Tech datas:
Model: 105t
Power rating: 400 w
Gas production rate: 100l/h
Working medium:distilled water or boiled water
Power supply:110v-240v/50~60hz
Operating pressure: 0.12mpa(normal)
Water consumption: 0.03l/h
Gross weight: 12kg
Dimensions: length 48cm width 28cm height 36cm
Main applications:
1., acrylic, perspex or pmma sheets, boards or letters polishing
2., jewellery(goldsmith and silversmith)
3., quartz glass bottles sealing or healing in medical field or chemical field
Model 105t supplied with
1flame torch
4copper tips (20.3mm;20.5mm)
1funnel
1hose
1anti-flame arresstor
1english manual instruction.

Packing in carton
21kg 48cm*28cm*36cm

Acylic flame polisher is a portable gas generator, and acknowledged as an extremely safe, reliable and cost effective way of producing a oxyhyrogen flame about 3000 degree centigrade replacing acetylene or natural gas or other fuel. It has been exported to usa, germany, france, ireland, australia and so on .
Features:
1.Low cost and obtained easily: just little water and little electricity
2.No air pollution:the only products of cumbustion is water vapor
3.Absolutely safe: have temper arrester, pressure control, overpressure protection equipment
4.High shock resistance manometer and digital display ampere meter
5.Fast start up time is only 30 seconds
6.Covered by full service and spare parts support
Tech datas:
Model: 105t
Power rating: 400 w
Gas production rate: 100l/h
Working medium:distilled water or boiled water
Power supply:110v-240v/50~60hz
Operating pressure: 0.12mpa(normal)
Water consumption: 0.03l/h
Gross weight: 12kg
Dimensions: length 48cm width 28cm height 36cm
Main applications:
1.Acrylic, perspex or pmma sheets, boards or letters polishing
2.Jewellery(goldsmith and silversmith)
3.Quartz glass bottles sealing or healing in medical field or chemical field
Model 105t supplied with
1flame torch
4copper tips (20.3mm;20.5mm)
1funnel
1hose
1anti-flame arresstor
1english manual instruction.




Packing in carton
12kg 48cm*28cm*36cm.

Flame polisher is a portable gas generator, and acknowledged as an extremely safe, reliable and cost effective way of producing a oxyhyrogen flame about 3000 degree centigrade replacing acetylene or natural gas or other fuel. It has been exported to usa, germany, france, ireland, australia and so on .
Features:
1.Low cost and obtained easily: just little water and little electricity
2.No air pollution:the only products of cumbustion is water vapor
3.Absolutely safe: have temper arrester, pressure control, overpressure protection equipment
4.High shock resistance manometer and digital display ampere meter
5.Fast start up time is only 30 seconds
6.Covered by full service and spare parts support
Tech datas:
Model: 105t
Power rating: 400 w
Gas production rate: 100l/h
Working medium:distilled water or boiled water
Power supply:110v-240v/50~60hz
Operating pressure: 0.12mpa(normal)
Water consumption: 0.03l/h
Gross weight: 12kg
Dimensions: length 48cm width 28cm height 36cm
Main applications:
1.Acrylic, perspex or pmma sheets, boards or letters polishing
2.Jewellery(goldsmith and silversmith)
3.Quartz glass bottles sealing or healing in medical field or chemical field
Model 105t supplied with
1flame torch
4copper tips (20.3mm;20.5mm)
1funnel
1hose
1anti-flame arresstor
1english manual instruction



Packing in carton
12kg 48cm*28cm*36cm.

Friction
 welding machine

Usage: cylinder rod, drill pipe
Max forging force: 5000 kn
Spindle speed:700 r/min
Welding diameter: up to 250 mm
Rotary clamping length: 200-400 mm
Mobile clamping length: 1000-5000 mm
The max stroke of the expansion shoe:600 mm
Total power: 150-200 kw
Spindle motor power:
Productivity:  2 seconds per piece
Weight: up to 80 tons

Details as per customers requirement and final comfirmation.