The line is mainly used for copper wire drawing and continuous annealing.
φ450 the drum wheel surface spray coating tungsten carbide, degree of hardness is high, the resistance to wear is good, the service life is long.
The back guy main engine and the constant speed turn splitting independent motor-driven, has trades the mold function fast.
The double plate continual recover of wire, trades the plate automatically, quaranteed trades the end of a thread the annealing quality.
Uses the direct current mahine to actuate, the starting movement is steady.
The electrical control, selects the import the driver and plc, the function is complete, the performance is stable.
Aluminum rod breakdown machine is horizontal slip type tandem drawing of aluminum and alloy aluminum rod break down, finishing capstan separated driven for quick die change: single step capstans 1 capstan with 1 passing die, replaceable tungsten carbide drawing rings long life for wearing.
The line is used to draw ordinary aluminum rod or aluminum alloy rod into wire. The drawing capstans are arranged in a line that are able to work continuously with drawing speed, mechanical parts and electrical control matching each other. It is easy to operate, easy to change dies without pause and to change spools automatically.
Main technical data
Max. Inlet diameter of aluminum rod: φ 9.5mm
Outlet diameter of aluminum wire: φ 1.8mm ~φ 5.0mm
Max. Drawing speed: 25m/s
Diameter of drawing capstan: φ 450mm
Max. Drawing pass: 13 nos
Max. Length in wire accumulator: 6m
Take-up spool size: pnd500-pnd630
Main motor for drawing: 200kw(dc)
Motor for final capstan: 45kw(dc)
Take-up motor: 22kw(ac)
Tubular stranding machine is tubular type high speed stranding with back twist, for 7/12/19b copper/aluminum round & compact conductors and steel wires stranding. Bearing surround the tubular, hysteresis bobbin tension control.
This line is mainly used for the assembly of bare and insulated conductors into concentric strands or cables including steel, aluminum, copper, aluminum alloy wire, as well as control cable and optical cable.
The line is mainly used for drawing copper, copper alloy contact wires( for high-speed electric railway).
Main specifications:
Inlet wire dia.: φ 27mm(max. )
Outlet wire dia.: φ 10.8-14.4mm
Drawing capstans dia.: φ 1000mm
Rod sectional area redution: 17-32%
Rod length extention: 20-47%
Drawing line speed: 1m/s( max. )
Drawing capstans is cooled by inner water(capcity: 15m3/h)
Air supply: pressure: 0.6mpa, flow: 2.0m3/min
Dawing lubrication: capacity: 15 m3, flow: 80l/min
Take-up reel size: φ 2000mm ( or coustomize)
Drawing capstans are driven by individual motor and the first one is 75kw dc motor, the next three are 55 kw dc motor
The height of running central wire: 1200mm
1. Multi functional jig
2. (8000-16000pcs) / work day
3. Automatic soldering
4. Automatic pre-solder oxide
5. Automatic unloading
6. Automatic soldering pot flux clean
7. Soldering pot automatic temperature control
8. Soldering level control quality
9. Rotation speed control
10. Soldering time control
11. Soldering speed control
12. Rotation protector
Feature:
1. Multi functional jig
2. (8000-16000pcs) / work day
3. Automatic soldering
4. Automatic pre-solder oxide
5. Automatic unloading
6. Automatic soldering pot flux clean
7. Soldering pot automatic temperature control
8. .Soldering level control quality
9. Rotation speed control
10. Soldering time control
11. Soldering speed control
12. Rotation protector
3638 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
1. Nimble and 360 degree rotational use.
2. Small, light and high output power.
3. High efficiency resistance welding machine
4. Application for auto body part, furniture, metal box, door.
Main features:
1.It applied to plastic products in the aspects of riveting, cutting, sealing and welding.
2.Optimization of the heat welding defects (yellowing, edge burning and blocking up).
1.Lift body electrically and adjust moulds conveniently and efficiently;
2.Weld pe, pp, nylon and pet which cannot be fused together by hot melting and ultrasonic welding.
3.Provide high-torque movement device with motor 1-50 ma
1.Choose different horns and corresponding bases according to different working parts.
2.Have low demand of mental welding surfaces and no need of any flux.
3.Be applied for fusing nickel net of ni-h battery and nickel sheet, aluminum foil and aluminum sheet and so on.
4.Fuse one and more together.
1.According to the products, choose pneumatic, hydraulic or servo motor drive.
2.Such parameters can be adjusted as welding temperature, heating time, cooling time, welding depth, pressure, transferred time.
3.According to the requirements of the welding procedure, choose semi-automatic or full-automatic mode.
4.According to the requirements of various materials, adjust the welding procedure.
Dimension: l1070mm*w1180mm*h2100mm
Weight: 500kg
Drive mode: pneumatic, hydraulic or servo motor drive.
Application: lighting, auto radiator, the hydrant of washing machine, storage battery, steam iron.
1.Set one-point or overall temperature-controlling riveting according to various car doorsí» welding areas.
2.Plc programmed control systems and human-computer interface for adjusting welding parameters.
3.The machine frame is weld with high-quality ú¼so it is of steadiness and high reliability.
Model: keb-qcmb50
Dimension: l1750mm*w1100mm*h2500mm
Weight: 300kg
Welding time: 50-120s/pcs
Application: car door, hood, instrument platform and etc.
1.Machine type 14db
2.Inlet diameter(mm) 0.6-1.2
3.Outlet diameter (mm) 0.25-0.5
4.Max. Speed(mpm) 800
5.Max.Number of drawing dies 14
6.Slip ratio of m/c 12%
7.Fix speed capstan slip ratio 8%
8.Capstan : tungsten
9.Max. Capstan dia.(mm) 380
10.Fix speed capstan dia. (mm) 330
11.Frame : welded by steel plate
12.Main machine power : 18.5kw three phase inductor motor
13.Spooler power : 5.5kw three phase inductor motor
14.Correction system : automatically control
15.Transmission method ú¦by timming belt
16.Pay-off method : over head
17.Tension control : pneumatic balance by swing arm
18.Lubrication system of drawing : half-immersing
19.Suitable spool (mm) 300
20.Capacity for take-up(kg) 35
21.Loading & unloading method : shaft type
22.Service voltage 380v
23.Brake : electromagnetic brake
24.Machine dimension(mm) : 1950l*1100w*1750h
25.Machine weight(kg) 2200
1. Cutting shaft and circular blade are driven by a.C motor with inverter control, which able to set rpm and running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. Functions are operated under lcd touch panel control, which is operator friendly and easy for data setting.
4. Central control system is plc unit, it can cut various sizes on one log roll by changing modes automatically.
5. Knife feeding is controlled by servo motor, the cutting speed is adjustable in high/low.
6. Equipped with knife angle auto adjustment, cutting angle can be changed from 8 to +8 degree automatically for making roll surface smoothly.
7. Safety cover: to protect operator during the production.
8. Sharpening device: grinding knife on the machine to save time for taking blade off.
Optional part:
1. Other size cutting shaft: it can be made as per the required core i.D.
2. Cutting supporter: for supporting log roll when cutting core below 38mm.
1. Equipped with connected unwind base and web pulling out by jog motor control.
2. Equipped auto tension controller and surface type lay on roller on unwind base to make web wound out smoothly.
3. Driven by 2 a.C motors, 1 for web feeding, 1 for rewind tension control which automatically increasing toque on the rewind shaft when the finished roll o.D is getting bigger.
4. Center type winding with surface pressure roller to rewind various materials on different requests.
Optional part:
1. Unwind pick-up lift : for loading jumbo roll on the machine quickly and time saving.
2. Equipped with separated shaft type unwind base.
3. Safety cover: connected unwind safety cover, hydraulic control.
4. Tabbing device :automatic tabbing on the web during the production.
5. Slitting device : able to be equipped with air score knife and trim removable unit for trimming at both sides and wide size slitting.
6. The air for the rewind shafts will be automatically filled and leaked in the production.
7. Material end cutting off and log roll wiping down are all applied automatically during the production and rewinding is finished.
3638 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
