VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Product name: Self leveling concrete without primer VFLOOR2
Compressive strength: >35 Mpa, 28 days later
Flexural strength: >7 Mpa, 28 days later
Application
Temperature: 5-30 degree
Mixing ratio: 20kgs powder + 5kgs Liquid
Feature & Benefits:
- Two component, just mix A+B
- Waterproofing
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture.
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 24 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours.
Floor laying may commence after 48 hours.
Coverage:
At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.
Length 300 mm
Width 300 mm
Thickness 24 mm
Specifications
Wood species: Acacia, Teak, Eucalyptus, Keruing
Wood Color: natural, dark brown, or customizable
Number of slats: 6 or 12
Moisture: 8 12 %
Length & Width tolerance: 0/+3mm
Thickness tolerance: +/- 0.2 mm
Glue: D4
Quality: ABC or customizable
Component: wood part with interlock plastic base
Installing area: 11 pieces/1m2 (square meter).
78 Blocks Tiles Slabs Suppliers
Short on time? Let Blocks Tiles Slabs sellers contact you.
With various marble designs, our Collection is a great choice for internal decoration.
Available sizes: 30x60, 40x80, 80x80 (cm)
Materials: Ceramic tiles, Porcelain tiles
Application: Wall and Floor
Min Order: 24000 pieces
Est. Time(days): less than 30 days
Specifications
Name: Garden wood decking tile with plastic base/ interlock wood flooring tile/ out door wood tile
Size(cm): T1.9/2.1xW30xL30
Material: Deck plastic, base wood
Wood type: Acacia
Finish: Oiled (100% Eco-Friendly)
Colour: Brown/Teak/Natural
MOQ: 1 cont 20 ft (11000-12000 pcs)
Humidity: 8-12%
Certificate: FSC or non FSC
Dimensions
Length: 300 mm
Width: 300 mm
Thickness: 19; 21 mm
Packing & Delivery
Packaging details: Export Standard
About us
was founded in 2009, based on the multinational development of production of import and export trade. Realizing the potential in export-import markets of domestic and foreign wood, has expanded the business market and diversed its products to meet customer needs worldwide. Currently, has been building a network of distributor in more than 18 countries worldwide and is constantly expanding. Our products: wood finger jointed laminated board, solid wood panels, table top, plywood, MDF, finished furniture according customer's request, etc.,
Description:
Repair 1 : is a one component cement based polymer modified high build repair and reprofiling mortar
Usage:
- For repairing all types of structures
- Overhead and vertical repairs
- Hand applied repairs
- For exterior and interior use
Advantages:
- Just add water
- Can be used on horizontal and vertical surfaces
Surface Preparation:
- The surface must be clean, dry, smooth and solid.
- Particles hampering adhesion like dirt, oil and paint must be removed from the surface.
- Highly absorbent surfaces must be saturated with water before application. No water accumulation should be left on the surfaces.
Colour: Grey
Shelf Life:18 months from date of production if stored properly in original, unopened and undamaged sealed pack.
Storage Conditions: Store in dry conditions. Protect from moisture and direct sunlight.
Packaging: 25kg/barrel and 5kg/ barrel
Description
Crack PU is a 2-component, 100% solids, moisture-tolerant, epoxy adhesive. It is a low-viscosity, high-strength adhesive formulated specifically for grouting both dry and damp cracks.
Where To Use
Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc.
Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability
Advantages
- Tenacious crack-sealing grout.
- Convenient easy mix ratio A:B = 2:1 by volume.
- Advanced low-viscosity structural resin.
- Unique, high-strength adhesive for (canâ??t dry) cracks.
Usage
Crack PU is used to fill and seal cavities and cracks in structural components such as columns, beams, foundations, decks and waterretaining structures. It not only forms an effective barrier against water infiltration, but also bonds the concrete sections, together, thereby restoring original structural strengths.
Shelf life
Expiry date 18 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 2kgs - B: 1kg
Component A is clear liquid: 2kgs/ plastic can
Component B is clear liquid: 1kg/plastic can
2) Combo A: 5kgs - B: 2,5kgs
Component A is clear liquid: 5kgs/ plastic can
Component B is clear liquid: 2,5kgs/plastic can
3) Combo A: 10kgs - B: 5kgs
Component A is clear liquid: 10kgs/ plastic can
Component B is clear liquid: 5kgs/plastic can
4) Combo A: 20kgs - B: 10kgs
Component A is clear liquid: 20kgs/ plastic can
Component B is clear liquid: 10kgs/plastic can
5) Combo A: 30kgs - B: 15kgs
Component A is clear liquid: 30kgs/ plastic can
Component B is clear liquid: 15kgs/plastic can
Description
Hardener Liquid: is Dustproof, shiny, sodiium silicate-based water repellent liquid surface hardener designed for application to concrete and cement based floors. It penetrates deeply into the surface zone of the concrete and provides permanent hardness.
Applications
- Airplane hangars
- Electronic assembly plants
- Manufacturing plants
- Warehouses and distribution centers
- Shipping and receiving areas
- Maintenance facilities
- Commercial and industrial floors
- Where light-reflective flooring is desired
- Floors subject to heavy or frequent traffic
- Multi-purpose sporting facilities
Application steps
Preparation: Grinding of concrete floors by sandpaper grinder and take away all debris, cement powder on the floor surface and then clean it
Spray onto the concrete surface. Spray 2 coats. Each spray is 24-48 hours apart
Important Note
- If the paint becomes stagnant can appear white chalk phenomenon
- If the layer is too thick it will can not dry out
Storage Conditions
Product must be stored in original, unopened and undamaged sealed packaging in dry conditions
Colour
Clear
Shelf Life
12 months from date of production
Consumption
- 3kg Liquid: approximately application 15 m2
- 7,8kg Liquid: approximately application 40 m2
- 30kg Liquid: approximately application 150 m2
The Art Collection redefines the idea of versatility and practicality by harmonically blending the beauty of traditional cement tiles with modern technology to create the cement design on the porcelain body.
Applying new technology has imbued Art Collection with outstanding advantages: durable bending strength, dirt resistance, color durability, and anti-slip.
