5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
Alloy grade
Silicon Si
Iron Fe
Copper Cu
Manganese Mn
Magnesium Mg
Chromium Cr
Zinc Zn
Titanium Ti
Zirconium Zr
other
Aluminum AL
new grade
old grade
0.40
0.40
0.10
0.5-0.8
5.8-6.8
0.20
0.02-0.10
each total
5A06
LF6
0.05
0.15
margi
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.
Parameter
Product Name
Aluminum H-shaped steel
Price range
$1000-$2000 Discounts are available for large orders
Minimum order quantity
1 ton
Specifications
Thickness 1-50mm, External diameter3-900mm,or according to requirements
Key attributes
Other attributes
Place of Origin Viet Nam
Brand Name Mango
Model Number G3562 System on Module
Mounting Type Pin to Pin
Description System on Module som soc
Appreance Stamp hole
Kernel ARM Cortex-A53 Quad core
CPU Rockchip RK3562
Operation System Android13 or Linux QT or Ubuntu
Frequency 2.0 GHz X 4
RAM 2GB DDR3 and 4GB DDR3 Optional
Flash 8GB and 16GB and 32GB eMMC Optional
Ethernet RTL8211E, the gigabit Ethernet PHY
Core Board Size 70mm x 48mm x 3mm
PIN 260PIN
The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
* Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.
Usage :
Widely used in various building structure and engineering structure
Delivery Time : 10~20days
Shipping :
1)Shipping by containers
2)Shipping by bulk ship
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
621 Used Computers Hardware Suppliers
Short on time? Let Used Computers Hardware sellers contact you.
channel steel is an effective way of metal corrosion prevention, which is mainly used on metal structures and facilities in various industries.
Product Name : Channel steel
Length : 6m, 9m, 12m Or As Your Requirement
Standard : JIS, GB, ASTM, EN, DIN
Technique : Hot / Cold Rolled
Application : Construction structure
Supply Ability : 1000 tons per day
Payment : TT LC DP ETC.
1. High Quality
Products Advantages
2. High Dimensional Accuracy
3. Cost Savings
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Color coated corrugated sheet, also known as pressure plate, the use of color coated steel plate, galvanized plate and other metal plate by rolling cold bending into a variety of wave type pressure plate, it is suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structure of the roof, wall and interior and exterior wall decoration. With light weight, high strength, rich color, convenient construction, seismic, fire, rain, long life, maintenance-free and other characteristics, has been widely used.
Product Name
Corrugated Galvanized Prepainted Roofing Sheet
Material
SGCC, DX51D, DX53D, DX54D, SPHC, Q195 and etc.
Thickness
0.12mm-0.8mm or customized
Width
600mm-1500mm or customized
Zinc Coating
30-500 g/ã?¡
Color Choice
Natural color, blue, green, yellow, red, grey, black, white and others
Standard
ASTM, BS, GB, JIS and etc.
Surface
Finished or unfinished is avaliable, coat or without coat
Application
Widely used in construction, home, appliance, decoration, wear resistant steel and etc.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Classification : Incoloy Alloy
Incoloy Pipe is a nickel-iron-chromium alloy with molybdenum and copper added. Incoloy Pipe has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Pipe is Especially resistant to sulfuric and phosphoric acids.
With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life.
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.
Product : Galvanized H beam
Standard : AISI, ASTM, BS, DIN, GB, JIS, etc
Web Width : 100-900mm Thick: 5-16mm
Flange : Width:100-400 Thick: 7-34mm
Length : 5.8m-12.0m or as your requirement
Packing details : In bundle with 6 circles of steel strip, each bundle about
2mts.
Surface : Perforated/galvanized/black
Inspection : BV,SGS,MTC,etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
* H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%.
* And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.
Product : Carbon Steel H beam
Standard AISI, ASTM, BS, DIN, GB, JIS, etc
Web Width: 100-900mm Thick: 5-16mm
Flange : Width:100-400 Thick: 7-34mm
Length : 5.8m-12.0m or as your requirement
Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts.
Surface : Pickling, Phosphating, Galvanizing
Inspection : BV,SGS,MTC,etc.
Warehouse : Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
* Stainless H beam is widely used in beams and columns of industrial and civil steel structures. Steel structure load-bearing supports for industrial structures. Ship and machinery manufacturing frame structure. Steel piles and supporting structures of underground works.
* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
Product : Stainless H beam
Standard : AISI, ASTM, BS, DIN, GB, JIS, etc
Web Width: 100-900mm Thick: 5-16mm
Flange : Width:100-400 Thick: 7-34mm
Length : 5.8m-12.0m or as your requirement
Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts.
Surface : Sandblasting, solution pickling
Inspection : BV,SGS,MTC,etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* Stainless steel I-beam is a long steel bar with a grooved section. It can be used to form various stress components according to the different needs of the structure, and can also be used as a connector between components. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, hoisting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves.
Stainless steel I-beam is a carbon structural steel used for construction. It is a simple section steel, mainly used for metal components and plant frames. Good weldability, plastic deformation performance and mechanical strength are required in use. The raw steel billet of stainless steel I-beam is low carbon square steel billet, and the finished stainless steel I-beam is delivered in hot rolling forming, normalizing or hot rolling state.
Product Name : Stainless : Steel I beam
Standard : DIN GB JIS BA AISI ASTM EN GOST etc.
Size : As customer request
Technique : Stainless steel
Packing : By bundles with steel strips or as customer request
Application : Mechanical & manufacture,Steel
structure,Shipbuilding,Bridging,Automobile chassis, etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam
The characteristics of galvanized I steel:
1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m;
2. Good plasticity and toughness: no deformation in cold bending;
3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate.
4. Good fire resistance: high melting point (1000 C), strong fire resistance;
5. Long service life : 100 years.
6. Flexible and fast installation: short construction period.
7. The color is bright and durable, without surface decoration
Standard DIN GB JIS BA AISI ASTM EN GOST etc.
Shape : I -Beam
Materials : Galvanized steel
Size : As customer request
Packing : By bundles with steel strips or as customer request
Application : Mechanical&manufacture,Steel
structure,Shipbuilding,Bridging,Automobile chassis, etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
1 Stainless steel angle steel is widely used in the construction layout, as well as in various engineering layouts, such as the construction of beams, and has a significant effect in the construction of engineering equipment.
2. When used, stainless steel angle steel has comparative weldability, strong plasticity and deformation, and also has certain mechanical strength.
3. The corrosion resistance of stainless steel angle steel is relatively high, and it has good corrosion resistance in the production process of pulp and paper. Moreover, stainless steel is also resistant to the corrosion of ocean and corrosive industrial atmosphere.
4. Stainless steel angle steel can be used as equipment for dry pulp and paper making, heat exchanger, dyeing equipment, film processing equipment, pipes, and materials for the exterior of buildings in coastal areas.
5. Precipitation hardening stainless steel angle steel is a steel that can precipitate carbides in the steel by means of heat treatment, so as to improve the strength.
6. Martensitic stainless steel angle steel is a kind of steel whose properties can be adjusted by means of heat treatment. Its strength and hardness are high and it is very useful in technology and mechanics.
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* Use of galvanized angle steel: widely used in power tower, communication tower, curtain wall materials, shelf construction, railway, highway protection, street lamp pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc.
Hot dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold galvanizing coating mainly ensures full contact between zinc powder and steel through electrochemical principle, and generates electrode potential difference to prevent corrosion. It is used to immerse the derusted angle steel in the molten zinc at about 500 â?? to make the angle steel surface adhere to the zinc layer, so as to prevent corrosion. It is suitable for various strong acid, alkali fog and other strong corrosion environments.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
channel steel is an effective way of metal corrosion prevention, which is mainly used on metal structures and facilities in various industries.
Product Name
Channel steel
Length
6m, 9m, 12m Or As Your Requirement
Standard
JIS, GB, ASTM, EN, DIN
Technique
Hot / Cold Rolled
Application
Construction structure
Supply Ability
1000 tons per day
Payment
TT LC DP ETC.
1. High Quality
Products Advantages
2. High Dimensional Accuracy
3. Cost Savings
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
* Galvanized channel steel is an effective way of metal corrosion prevention, which is mainly used on metal structures and facilities in various industries.
Product Name : Galvanized steel channel
Length : 6m, 9m, 12m Or As Your Requirement
Standard : JIS, GB, ASTM, EN, DIN
Technique : Hot / Cold Rolled
Application : Construction structure
Supply Ability : 1000 tons per day
Payment : TT LC DP ETC.
1. High Quality
Products Advantages
2. High Dimensional Accuracy
3. Cost Savings
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
Hot rolled stainless steel light channel steel (YB164-63) Hot rolled light channel steel is a kind of steel with wide legs and thin walls, which has better economic effect than ordinary hot rolled channel steel. Main use: for building and steel structure.
Product Name : Stainless steel Channel
Length : 6m, 9m, 12m Or As Your Requirement
Standard : JIS, GB, ASTM, EN, DIN
Technique : Hot / Cold Rolled
Application : Construction structure
Supply Ability : 1000 tons per day
Payment : TT LC DP ETC.
1. High Quality
Products Advantages
2. High Dimensional Accuracy
3. Cost Savings
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
621 Used Computers Hardware Suppliers
Short on time? Let Used Computers Hardware sellers contact you.
