Model: H10.00XM-6, 10-ton capacity
Brand / Model: Hyster H10.00XM-6
Year of Manufacture: 2007
Capacity: 10,750 kg @ 600 mm load center
Lifting Height: 3,750 mm
Truck Weight: 15,260 kg
Engine: Cummins Diesel, 116 kW (approx. 155 HP), 6-cylinder turbocharged
Condition: Good working condition, ex-military surplus, limited operating hours
Location: Korea
CASE MW36 Wheel Loader - Typical Specifications
Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs)
Bucket Capacity: Generally around 0.65 to 0.9 cubic meters
Dimensions:
Overall Length: Approximately 4.0 m (varies with configuration)
Width: Roughly 2.5 m
Height: Around 3.0 m
Lift Height: Typically in the range of 2.5 to 3.0 m
Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration
Additional Features:
Ergonomic operator station
Versatile hydraulic system for various attachments
We have a stock of quality, low-life generators from the military
CAT 3408 400kW
CAT C-16 500kW
CAT 3406 350kW (House type)
Cummins VTA-28G5 500kW
Cummins LTA-10 250kW (House Type)
Cummins LTA-10 250kW
Cummins NT85-G3 350kW
Cummins NT85-G3 350kW (House type)
Cummins NT85-G2 300kW
Please study if it is suitable for your market.
Model: Volvo Penta TAMD41M-A
Quantity: 12 Units with gearbox & single unit available
Condition: Ex-Navy very clean, well-maintained
Operating Hours: 500-1,200 hours
Location: Busan, Korea
Proof: Actual warehouse photos and videos available upon request
Gearbox: ZF HSW 630 H1
Reduction Ratio: 1.51 (Forward) / 1.52 (Reverse)
3714 Used Tyres Suppliers
Short on time? Let Used Tyres sellers contact you.
Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
We are very well handling used Korean car engine with gearbox:
Hyundai Porter/Grace/SantaFe engine with gearbox (Euro 4, 5)
Kia Bongo/carnival engine with gearbox (Euro 3, 4, 5)
we are to meet your needing various engines from Korea
Used tires from 13 inch to 20 inch. Mostly korea origin used tires such as hankook, kumho, nexen, also some of them are european brand tires.
Customers request we can do double or triple files for the tires.
Name of product : used tire
Price : please send us an inquiry
Product origin : mostly south korea
Specification : used tires with a and b grade
A grade is more than 70% up thread used tires.
Grade is between 40 to 70% thread used tires
We do not deal with c grade used tires for customer. Mostly we shred them and sell the rubber factory in korea.
Minimum of quantity : 20 or 40 container around 2000 unit to 3000units
Packing is in export packing.
We are pleased to offer a genuine low-hour Caterpillar diesel generator set in excellent working condition, located in South Korea.
Product: Diesel Generator Set
Engine Brand & Model: Caterpillar (CAT) D399 (V-16 Diesel, S/N: 35B783)
Alternator Brand & Model: KATO 800SS90 (Brushless)
Rated Output: 800 kW / 1,000 kVA
Frequency & Speed: 60 Hz / 1,200 RPM
Voltage: 1,907 V / 3,300 V (3-Phase, 6-Wire)
Operating Hours: 665 Hours (Genuine low hours)
Condition: Used / Fully functional & Clean condition
Port of Loading: Busan Port, South Korea
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
We offer the following engine
CRM S.p.A. Motori Marini, Italy
18-Cylinder High-Speed Marine Diesel Engine
Year: 1994
Maximum Output: 1,344 kW (Approx. 1,827 HP)
Rated Speed: 2,120 RPM
Mechanical Fuel Injection
Turbocharged
Complete engine as shown in the photographs
Location: Busan, South Korea
We offer high and fine quality scrap tire to our most reliable customers which we produce from reliable vendor. Our scrap consists of old tire of various brands and good conditioned for rubber manufacturer. Known for its reliable and durable attributes, the product is used in various applications.
You are welcome to inspect the stock. Buyers cover all the transport cost. We can offer scrap baled tires or shredded tires from S.Korea on a regular basis. We require the importer to provide us with their import permits for tires. Pictures are attached for your reference. Shall you have any further questions, feel free to contact us
PACKING: 23MT
PRICES: 85~90 Per MT FOB
Origin: S.Korea
Monthly Supply: 1000~1500 Tonnes
3714 Used Tyres Suppliers
Short on time? Let Used Tyres sellers contact you.
