HI GLOSS LATEX
Hi - Gloss Latex the Glamorous - interior is Latex Acrylic copolymer based Premium Latex-emulsion paint.
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints Hi - Gloss Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Hi-Gloss Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Hi - Gloss Latex.
PROPERTIES
Colour : Full range - as per shade card
Finish : Hi-Gloss
Solids(Volume) : 52% and above
Specific Gravity : 1.27 +/- 0.1
Theoretical Coverage : 250 â?? 400 sq. ft. per gallon
DRYING TIME :â?? AT 25 �° T
Touch Dry : 2 hours
GULF TEX
Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition.
PROPERTIES
Colour : As per shade card
Finish : Texture finish
Consistency: Thixotropic
Solids: 65 % ± 3 %
Specific gravity: 1.70 ± 0.05
Theoretical Coverage 1 -2 m2/ltr
DRYING TIME : AT 25
To handle: 4 hours
To Recoat: overnight
Number of coats: 1
Application by: Roller for heavy tex or Hooper spray
TEX PRIMER WHITE
Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints
Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works.
PROPERTIES
Colour : Grey
Finish : Matt
Theoretical Coverage 6-7 m2/lit on masonry surface
Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application.
Solids (volume) : 24�±2%
Curing time : 3-6 hours at 25 �° C
Full cure : 7 days
Flash point : 25 �° C (ISO 367 â??83)
Specific gravity : 1.00 when mixed A+B
Pot life : 4 hours at 25 �° C
Mixing ratio : 4 parts base"A" : 1 part hardner "B"
Solvent : Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.
2714 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Payments:This supplier also supports L/C,T/T,Western Union payments.
Place of Origin: United Arab Emirates
Main Raw Material :Acrylic
Usage : Building Coating, Texture Paint for Exterior and Interior
State: : Liquid Coating
A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating.
Colour: Full range as per shade card
Finish: Pearlescent-Satin
Vehicle Type: Acrylic
Solids( volume) : 42 ± 2%
Specific gravity: 1.03 ± 0.05
Theoretical Coverage: 260 - 400 sq. ft. per gallonMetal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes
Bulk Buying:
1 Totes = 264 Gallons
1 Barrel = 55 Gallons
Bulk Shipping:
We ship containers. And It will accommodate
1 container of 20 feet = 80 barrels
1 container of 20 feet = 18 totes
Application Method :Brush
Brand Name : Regent Paints
Supply Ability
Supply Ability:
20000 Liter/Liters per Day
Packaging & Delivery
Packaging Details
1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs
1 US Gallon, 5 US Gallon
Payments:This supplier also supports L/C,T/T,Western Union payments.
Place of Origin:
United Arab Emirates
Usage:
Building Coating, Wall Coating
State:
LIQUID
Model Number:
High gloss enamel alkyd
Main Raw Material:
ALKYD
Application Method:
Brush
Brand Name:
High gloss enamel alkyd
BULK AND RETAIL:
ALL COLOR
Port
Jebel Ali
Lead Time :
As per your requirements
Main Raw Material ALKYD
Application Method Brush
State LIQUID
Packaging & Shipping
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
Payments:This supplier also supports L/C payments.
Quick Details
Place of Origin:
GBA-Alderney
Usage:
Building Coating
State:
Emulsion
Model Number:
REGENT GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Brand Name:
REGENT GYPSM PUTTY
Supply Ability
Supply Ability:
20000 Ton/Tons per Year
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement
Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion
Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc
Properties:
Colour: White
Finish: Smooth
Solids: 70%
Specific gravity: 1.65 +/- 0.03
Theoretical Coverage: 2 �¢??3 m2/ltr
Drying time : At 25
To handle: �½ hour
To Recoat: Over night
Number of coats: 1
Precautions:
Keep from freezing, contains water.
May cause eye , nose, and throat and skin irritation.
Keep out of the reach of children
Packing:
Metal drums one US gallon, 5 US gallons
Category: Emulsion. Tags: gypsm putty, putty.
Place of Origin: Alderney
Main Raw Material: Gypsm putty
Packaging & Shipping In 25kg paper bags inner with PE bags
Bulk Shipping:
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
CONTRACTOR LATEX
A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc.
USES
Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
ROPERTIES
Colour : Full range - as per shade card
Finish : Matt
Solids(Volume) : 52% and above
Specific Gravity : 1.40 +/- 0.1
Theoretical Coverage : 250 - 400 sq. ft. per gallon
ACRYLIC THINNER
IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.
G P THINNER
It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.
MICRO TEX
Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured,
PROPERTIES
Colour : As per shade card
Finish : Light texture finish
Consistency: Thixotropic
Solids: 50 % +/- 2 %
Specific gravity: 1.55
Theoretical Coverage 2.5 â??3.5 m 2/ ltr
DRYING TIME : AT 25 �°
To handle: 3-4 hours
To Recoat: overnight
Number of coats: 1 -2
Application by: Roller or brush
Description
Review
It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface.
APPLICATIONS:
Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces.
SURFACE PREPARATION:
Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence
PRECAUTIONS:
Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation
PROPERTIES
CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID
Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit.
Colour (Saybolt) ASTM D 1209 +30
Initial Boiling Point ASTM D 850 112�° C
Copper Corrosion ASTM D 849 None
Non â?? Aromatics ASTM D 2360 40 â?? 50%
Flash Point (Abel) IP 170 24 �° C
PRECAUTIONS:
Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children
PACKING:
Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications.
USES
It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use.
PROPERTIES
Colour, Dry Film : Red
Finish, Dry Film : Smooth/Matt
Volume Solids, % 51�± 2
Specific Gravity : 1.46�± 0.05
Theoretical Spreading Range : 11-12 M2/L
Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat
Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat
Flash Point : 38 �° C
Flexibility : Good
Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)
Dry To Recoat/Overcoat : 12 Hours
Hard Dry : 24 Hours
2714 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
