Find Verified Industrial And Automotive Suppliers, Manufacturers and Wholesalers

EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.

Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg

Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality

Our current stock of Transmissions exceeds over 3,000 units covering both manual and automatic models. We stock New/core/good used transmissions and always have special offers available for bulk purchases.
We cover a wide range of current models and specialise in classic British and American applications. We also stock a wide range of Transfer boxes and by the end of 2019 will hold a comprehensive selection of hard parts to complement the stock we have. In the meantime if you have any requirements for these at present please do not hesitate to ask.

However big or small your requirements are, our team of specialists will be happy to assist you.

Product stocked at: Colchester branch.
Closest Airport: All London airports within easy reach.

Here at Autoenterprises we have been supplying a full range of core air-conditioning compressors, for all types of vehicles from passenger cars to heavy duty vehicles, since 2006. We keep a stock of at least 40,000 including various new units from time to time.
Each compressor has been fully checked to make sure it is in a re-manufacturable condition, and logged on our specially made database, which holds information on OE /OEM numbers, type, pulley dimensions, Rear Head number, four pictures of each compressor, and a whole host of customers cross-reference numbers.

Whether you are looking to buy two pieces of Mercedes 7SEU17C Compressors, or 300 pieces of 10PA17C compressors we have enough stock, and a large enough supply chain to meet any requirements you may have. Be it a perfectly turning/pumping unit or a seized unit for parts, we can supply to your needs.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

Autoenterprises caliper division was launched in 1999 as part of the company founding, and has since then grown to be one of our largest product lines, with over 600,000 calipers on stock at any time. We hold a full range of calipers for any kind of vehicle - passenger car, commercial and heavy-commercial - covering a wide variety of manufacturers, makes and models.
The divisions 7 man team is headed by John Collins (Jnr.), who oversees the constant searching, buying, trading and sorting of parts that enables us to maintain an accurate, detailed and up-to-date stock list. Our carefully administered database allows us to rapidly break-down stock by any criterion, for example by casting number or manufacturer, down to minute details such as piston diameter. We also keep comprehensive records of customer reference numbers, allowing us to respond even faster to enquiries from returning customers.

Our meticulous quality control process ensures that the calipers we supply are always of a high-quality, re-manufacturable condition.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

Autoenterprises began its diesel injection division in 2006. Since then it has seen steady growth, and our aim is to expand this section even further. With stocks of over 60,000 pumps and injectors, we have fresh stock arriving all of the time from sources worldwide.
All pumps and injectors are thoroughly checked to ensure that they are in a re-manufacturable state. For instance, we will only supply common-rail injectors if the electrical connectors are in perfect, A-grade condition (unless requested otherwise by the customer).

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

EGR valves is Autoenterprises latest product and is set to grow substantially over the next few years. We started the line early 2017 and now hold over 5,000 units for a wide variety of applications from car to light commercial.
The line is based at our North East location which has the room to expand the product into the tens of thousands over the coming years.

Product stocked at: Durham branch.
Closest Airport: Newcastle (NCL).

Autoenterprises introduced a steering pump division in 2004, and now stocks around 100,000 hydraulic and electric pumps for all types of vehicles, covering all manufacturers.
Detailed records are made for every unit in our database which has accumulated a depth of customer cross-reference numbers, further increasing the accuracy with which we identify and sort incoming parts, as well as the speed with which we can source and supply to our customers.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

We have been stocking steering racks since Autoenterprises was founded in 1999, and we pride ourselves on the quality of the parts that we supply throughout the world.
Every rack is carefully inspected at every stage our supply process - at procurement, upon arrival to our warehouse, and then once more before despatch to customers - ensuring that all steering racks are sold in perfect re-manufacturable condition.

Operated by our 6 man team, we stock over 50,000 steering rack-and-pinions at any given time. These consist of manual, power and electric racks for right- and left-hand drive, from all manufacturers, from Adwest to ZF, and supply parts for all types of vehicles. We also now stock steering boxes as a component of the Steering Rack Division.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

Turbos are a relatively new line for Autoenterprises, which has seen extremely rapid growth since its introduction, and demand is now higher than ever with over 25,000 turbo chargers on stock, comprising parts for passenger and light- and heavy-commercial vehicles.
We recognise the paramount importance of a turbo chargers condition and pay extremely close attention to the internals of each and every part that we process. We can therefore ensure that, should it be required, we are able to reliably supply turbo chargers that are in perfect, A-grade condition.

Petroleum Lubricant Oil is a high-performance lubricant formulated from premium base oils and advanced additive packages to provide superior protection against wear, corrosion, oxidation, and thermal degradation. It is suitable for automotive engines, industrial machinery, hydraulic systems, compressors, gearboxes, and heavy-duty equipment.
Our lubricants are manufactured under strict quality control standards to ensure consistent performance, extended equipment life, reduced maintenance costs, and improved operational efficiency. Available in various viscosity grades and formulations to meet specific customer requirements and international standards.

Applications include automotive, marine, industrial, mining, construction, power generation, and manufacturing sectors.

LNG (Liquefied Natural Gas) is natural gas that has been cooled to approximately â??162�°C, reducing its volume substantially for efficient storage and transportation. It primarily consists of methane and is widely used for power generation, industrial heating, city gas distribution, marine fuel, and other energy applications. LNG is supplied in bulk under cryogenic conditions with specifications customized according to buyer requirements and destination-country regulations.

Sulfur : Very low
Water : Controlled to pipeline/LNG specification
Nitrogen : Contract/specification dependent
Heating value : Typically ~35 - 45 MJ/Nm
Density : Approx. 430 - 470 kg/m

High energy density compared with gaseous natural gas
Efficient for long-distance transportation
Lower sulfur and particulate emissions than many conventional fossil fuels
Suitable for large-scale industrial and power applications

LPG (Liquefied Petroleum Gas) is a clean-burning gaseous fuel stored and transported in liquefied form under pressure. It primarily consists of propane, butane or a mixture of both, depending on the grade and intended application.

Main Components : Propane / Butane
Physical State ; Liquefied gas under pressure
Appearance : Colorless
Odor : Odorized for leak detection where required
Propane Content : Grade dependent

High energy content
Clean-burning fuel compared with many conventional solid fuels
Easy to store and transport in liquefied form
Suitable for domestic and industrial applications
Rapid and controllable combustion

Crude Oil is an unrefined petroleum product extracted from underground reservoirs and used as the primary feedstock for producing fuels, lubricants, petrochemicals, plastics and other petroleum-based products. Crude oil is classified according to its API gravity, sulfur content, viscosity, density and overall quality.

Color : Brown to black
API Gravity : Approximately 20 - 45 API, depending on grade
Sulfur Content Low, medium or high sulfur depending on origin
Density : Typically 0.80 - 0.95 g/cm
Water & Sediment : As per contractual specification
Salt Content : As per refinery specification

Major feedstock for global petroleum refining
Available in light, medium and heavy grades
Can be selected according to refinery requirements
Suitable for fuel and petrochemical production
Supports large-volume industrial procurement

We supply rigorously inspected, wholesale used tires for international importers, distributors, and retreaders. Unlike standard bulk scrap shipments, every tire in our inventory is pressure-tested, graded, and organized to maximize retail turnaround and eliminate defective inventory.

Key Advantages: Meticulously matched by brand, model, and uniform tread wear to deliver high resale margins for retail tire shops

Strict Grading Standards:

Grade A: 5mm+ tread remaining, clean casings, no repairs or sidewall damage.

Grade B: 3mm to 5mm tread remaining, pressure-tested and structurally sound.

Commercial TBR: Virgin casings and regroovable options across steer, drive, and trailer patterns.

Efficient Container Packing: Custom packing options available (loose-loaded, doubled, or tripled) to optimize freight costs per unit.

Rapid Order Manifests: Sourcing and shipping price manifests provided with accurate lead times and documentation for customs clearance.

Contact & Inquiries:
Send your required size breakdown, target grades, and destination port to receive a comprehensive CIF/FOB quote.

We are a global supplier of premium and budget wholesale auto spare parts, bridging the gap between quality manufacturing and global demand. Sourced from certified OEM and reliable aftermarket manufacturers across Europe and Asia, our comprehensive catalog covers everything from engine components to complex electrical systems.

Whether you are supplying premium dealerships, independent workshops, or fleet operators, we offer flexible tiers of quality to fit your exact market requirements and price points.

Comprehensive Parts Categories
We supply a vast catalog of automotive parts in bulk to keep your supply chain fully stocked:

Engine Components: Pistons & Rings, Gaskets & Seals, Oil Pumps, Water Pumps, Turbochargers

Brake Systems: Brake Pads, Brake Discs, Calipers, ABS Sensors, Brake Lines

Suspension: Shock Absorbers, Struts, Control Arms, Ball Joints, Tie Rods

Electrical: Alternators, Starters, Sensors, Ignition Coils, ECUs

Cooling Systems: Radiators, Thermostats, Fan Motors, Coolant Pipes, Intercoolers

Filters: Oil, Air, Fuel, Cabin, and Transmission Filters

Available Premium Brands: Bosch, Mahle, Brembo, ZF, Valeo, Denso, and many more

Flexible Quality Tiers to Suit Your Market
We offer distinct quality levels to match your buyer demographics and warranty requirements (All factories are ISO/TS 16949 certified):

Genuine (OEM): Original manufacturer parts. 12â??24 months warranty. Ideal for dealerships and premium service centers. (MOQ: 50+ units)

OEM Equivalent: Produced in the same factory to identical specs. 12 months warranty. Perfect for independent workshops. (MOQ: 100+ units)

Aftermarket Premium: ISO-certified factory production. 6â??12 months warranty. Designed for fleet operators and cost-conscious buyers. (MOQ: 200+ units)

Aftermarket Economy: Standard specifications. 3â??6 months warranty. Best for repair shops and secondary markets. (MOQ: 500+ units)

Global Logistics & Shipping Built In
We donâ??t just distribute parts; we manage the freight. As a certified AEO logistics partner, we handle the entire supply chain from factory loading to destination port clearance.

FCL Shipping: Competitive pricing for 20ft and 40ft container loads directly to your nearest port.

Flexible Incoterms: EXW, FOB, CIF, or DDP available based on your operational needs.

Ready to stock your inventory? Contact us with your target region, required categories, and quality tiers to receive a custom price list and logistics quote. Our dedicated account managers respond within 24 hours.

Get high-performance premium wholesale tires for passenger and commercial vehicles. We supply top global brands like Michelin, Bridgestone, Continental, Pirelli, and more. We have both premium and budget brands available for instant export.

Magnesium Sulphate is a water-soluble inorganic salt containing magnesium (Mg) and sulphur (S). It is commonly supplied as magnesium sulphate heptahydrate (MgSO4.7H2O), also known as Epsom salt. The product is used as a magnesium and sulphur source in fertilizers, animal nutrition, chemical processing, and industrial applications.

Properties
Chemical Formula MgSO4.7H2O
Appearance White crystalline powder or granules
Magnesium Oxide (MgO) Approx. 16%
Magnesium (Mg) Approx. 9.8%
Sulphur (S) Approx. 13%
Purity 98-99%
Moisture Controlled
Solubility Fully soluble in water
pH (5% solution) Approx. 5-9

Aluminium Ingot A7 is a high-purity primary aluminium product with a minimum aluminium content of 99.70%, widely used in the automotive, construction, electrical, packaging, aerospace, and manufacturing industries. Manufactured according to international quality standards, the ingots offer excellent corrosion resistance, high conductivity, superior castability, and outstanding mechanical properties. The product is suitable for remelting, alloy production, extrusion, rolling mills, and various industrial applications.

Relatively new to our product range, Autoenterprises has begun establishing a footprint in the growing market for steering columns, and with around 2,000 units on stock, we have already catalogued over 100 unique parts, amassing a foundation of OE and after-market reference numbers, product photos and vehicle application data.
As the product-line matures and their use grows ever more widespread, we will push hard to build upon our growing expertise and emerge as a leader in the developing market for used core steering columns.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

Jet Fuel A1 is available through a direct mandate with a Kazakhstan refinery and title holder. The product is non-sanctioned and supplied in accordance with international aviation fuel specifications for commercial and private aviation use.