SYNTHECH MOTOR OILS SAE 5W-20 / 5W-30 / 5W-40 / 10W-30 / 10W-40 / 20W50 API SN/CJ-4, SN/CF, SM/CI-4, SM/CF
LUBENZ INFINITY SM series is designed with semi-synthetic base stocks and advanced technology additive system to provide very high level of engine protection and performance. It is suitable for higher mileage gasoline fueled automobiles and light duty trucks requiring an API SM/CF specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines and better oil consumption control in older vehicles where oil usage (burning) is an issue.
X ENGINE OILS (SAE 10W-30/10W-40/10W-60/15W-40/20W-40/20W-50/20W-60 API SN/CF, SM/CF, SL/CF, SG/CF, SG/CD) ( mineral based)
LUBENZ PREMIUM PLUS PEO series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most car manufacturers and is suitable for use in both gasoline and diesel, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels.
MAX POWER SAE 10W-40 / 10W-60 / 20W-50 / 20W-60 API SN, SM/CF, SL/CF, SL)
MINERAL BASED)
LUBENZ PREMIUM PEO SAE SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines.
TURBO PLUS DIESEL SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 API CJ-4, CI-4 PLUS,
CI-4, CH-4, CG-4, CF-4, CI-4/SM, CI-4/SL, CH-4/SJ (MINERAL BASED DIESEL OIL)
LUBENZ SILVER HDEO 5000 series are monograde diesel engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API CF-4/CF-2 specification. Suitable for heavy duty, high output diesel engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions.
X DIESEL ENGINE OILS SAE 10W-40 / 15W-40 / 20W-50 / 20W-60 API CJ-4 / CI-4 /
CH-4 / CG-4 / CF-4 (MINERAL BASED ENGINE OIL)
LUBENZ GLORIA PLUS 15W40 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions.
for more information, please contact us.
16021 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
TURBO X OILS SAE 30 / 40 / 50 / 60 API CF-4 / CF, CF/SF)
(MINERAL BASED ENGINE OIL)
LUBENZ ONYX TRUNCK PISTON EO series is a range of high performance 30 TBN marine diesel engine oils formulated with premium quality base stocks and high performance additive detergent technology to ensure optimum performance and protection for trunk piston engines. They are designed to operate efficiently in severe residual-fuelled medium-speed diesel applications found in marine and stationary power industries. These TPEOs provide outstanding residual fuel compatibility and excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt and piston under crowns operating under severe conditions.
LUBENZ RESILIENT 4 T 20W50 SM is designed with high quality synthetic blend base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most motorcycle manufacturers and is suitable for use in 4 stroke gasoline engines, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels.
LUBENZ RESILIENT 4 T 20W50 SL is designed with high quality Synthetic Blend base stocks and advanced technology additive system to provide high level of protection and performance.It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most scooter manufacturers, with naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels.It is suitable for modern 4-stroke Scooters of European, Taiwanese, Japanese, Chinese, Indian manufacturers.
LUBENZ HOXX PLUS HYDRAULIC OIL HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic
fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed
to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under
severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in
systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems.
LUBENZ IND COMPRESSOR OIL of lubricants are supreme performance air compressor oils formulated with
high quality base stocks and advanced additive technology, to provide exceptional equipment protection and
reliability for compressors operating under mild to severe conditions. They are designed to meet or exceed the
requirements of DIN 51506 VD-L standards and demonstrate high resistance to oxidation and deposit
formation.
LUBENZ INDS REFRIGERATION OIL are high performance lubricants formulated from extremely low wax naphthenic oil primarily intended for use in refrigeration compressors where an uninhibited oil is required. It is recommended for use in
refrigeration compressors using ammonia, CFC (chlorofluorocarbon) and HCFC (hydrochloro-fluorocarbon) refrigerants
where the evaporator temperature ranges down to approximately -35F or -37C. It is compatible with most refrigerants except sulphur dioxide & are not recommended for use with HFC (hydroflurocarbon) refrigerants.
LUBENZ LUBETHERM HEAT TRANSFER OIL are high performance HTOs formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation & are intended for use in closed indirect heating
installations. The flash points of these oils will not decrease significantly in service because of their resistance to thermal
cracking at the operating temperatures for which they are recommended.
LUBENZ PILLAR TURBINE OIL series are supreme performance circulating oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability in applications lubricated by circulating systems which are operating under low to medium severity conditions. They are designed to meet or exceed the general requirements of most builders of turbines, vacuum pumps, compressors & bearings and demonstrate high resistance to oxidation and sludge & varnish formation.
LUBENZ ROXX SPECIAL GEARLUBE of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears.
LUBENZ SP FLUSHING OIL is a solvent free, fast acting, engine cleaning formulation that removes engine
depos- its, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection
and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process.
LUBENZ SP SEWING MACHINE OIL range of lubricants are premium quality oils specifically formulated for the
lubrication of high-speed machine elements in industrial sewing machines. These oils are formulated from very high
quality hydro-treated, low viscosity base oils and optimum additive technology system to provide improved thermal,
oxidation and color stability. They are available in three viscosity grades,LUBENZ SP SEWING MACHINE OIL 10 (ISO VG
10), SM 15 (ISO VG 15) and SM 22 (ISO VG 22).
LUBENZ MONOX MARINE MULTI SYSTEM series is a range of high performance marine multipurpose system oils formulated with high quality paraffinic base stocks and balanced additive system to ensure optimum performance and excellent protection in low speed, high output cross head marine engines, operating on residual fuels. It has sufficient alkalinity to neutralize any strong acidic combustion products which may enter into the crankcase and it demonstrates high load carrying ability under severe operating conditions.
LUBENZ ONYX TRUNCK PISTON EO series is a range of high performance 30 TBN marine diesel engine oils formulated with premium quality base stocks and high performance additive detergent technology to ensure optimum performance and protection for trunk piston engines. They are designed to operate efficiently in severe residual-fuelled medium-speed diesel applications found in marine and stationary power industries. These TPEOs provide outstanding residual fuel compatibility and excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt and piston under crowns operating under severe conditions.
LUBENZ VISTA AUTOMATIC TRANSMISSION FLUID A TYPE A (ATF DEXIII-CVT) is a high performance automatic transmission
oil, formulated with high quality base stocks, shear stable viscosity index improvers and advanced additive
system to meet or exceed the requirements of General Motors for Type A specification. Suitable for
passenger cars and commercial automatic transmissions, for use in applications like power steering
systems, hydraulics and some manual transmissions where automatic transmission fluid is specified.
LUBENZ GEAR OIL ROXX GL-4 of lubricants are high performance heavy duty gear oils, formulated from high quality base oils and
an advanced additive system. These lubricants are designed for automotive heavy- duty transmissions, axles and final drives.
Moreover these oils are engineered to work efficiently in transmissions where protection against wear and scoring is required
and high level of oil film protection is desired.
for more information, please contact us.
16021 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
