Find Verified Construction Paper Suppliers, Manufacturers and Wholesalers

HDPE Pipes :

Pentas supplies high density polyethylene hdpe pipes for size ranging from 16mm od up to 1,200mm od, pressure classification starts from 4bar up to 25 bars. Standard cutting lengths for smaller pipes up to 125mm od are 100m and 200m. Larger diameters have standard cutting length of 6m and 12m. Other pressure classes and cutting lengths outside the standard can be produced upon special request

Marine boats, kaya ropes, yachts safety equipment - life jackets, eyewear, work vests, safety hand gloves, safety shoes, safety belts and more canopies, life boats boat equipment and accessories, pedal boats, binoculars boat and marine spare parts out board motors, club cars, golf carts and more.

All types of fresh fish, prawns , lobsters , shells and more

Deformed Steel Bars - Hot rolled
Diameter: 6mm to 32 mm
Length: 6m, 12m
Grade: SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615
GR40/60
Surface: Black, Corrugated, Straight length
Application: Widely used in construction industry for reinforcing concert.

SGCC AGRICULTURAL SULPHUR (99.95%)

7704-34-9 (HS CODE 2503 00 00)
Sulphur is widely recognized as the "Fourth Major Nutrient" after Nitrogen, Phosphorus,
and Potassium. It is the ultimate solution for common soil challenges

Available Packaging 50 KG - 1000 KG

Characteristics
Purity (Concentration)
99.95%

Physical State & Appearance
Solid (Chips or pellets), Bright Yellow

Molecular Weight
32.06 g/mol

Melting Point
113 to 120 C

Boiling Point
444 to 445 C

Density
2.07 g/cm at 25 C

Mass fraction of ash
0.03%

Mass fraction of organic substances
0.03%

Mass fraction of acids (as HSO)
0.003%

Mass fraction of water (Moisture)
0.2%

Mechanical contamination
Not allowed (0% - No paper, wood, sand, etc.)

Advantages
Reclaiming Alkaline & Calcareous Soils
pH Reduction: Actively lowers soil alkalinity to create an optimal growing environment. Nutrient Unlocking: Facilitates the release and absorption of locked macro and micro-nutrients in the soil (such as Phosphorus, Iron, and Zinc), significantly reducing the waste of other fertilizers.

Enhancing Crop Growth & Yield
Plays a fundamental role in the synthesis of vital amino acids and plant proteins. Increases the quality and quantity of volatile oils, making it highly recommended for crops like onions, garlic, canola, and potatoes.

Drip Irrigation System Cleaner
Actively dissolves calcification, salt buildup, and mineral deposits that clog drippers and irrigation networks. It restores your system's efficiency to 100% and significantly extends its lifespan, saving you thousands of dollars in maintenance and replacement costs.

Soil Protection & Disinfection
Acts as a natural soil disinfectant and provides a robust preventative shield against various soil-borne fungal diseases.

PACKAGING options
Supplied in durable 50 And kg PE (Polyethylene) bags, designed to withstand tough transportation and storage conditions.

Storage
Keep bags tightly closed. Store in a dry, well-ventilated, and cool area away from direct heat sources, ignition, and incompatible materials.

Our anodised aluminium sheets have different types of surface finishes for different applications in different industries. Kitchen appliances, airplanes, electronics and constructions are a few utilizations of this world class product.

Specification : Descriptions
Thickness : 0.2 to 10 mm
Width : 900 to 2200 mm
Length : As per requirements

Pig Iron is another one of the by-products of our iron ore mining process. Our pig iron ingots can be further processed to produce cast iron, wrought iron and steel.

Specification : Descriptions
C : 3.8% - 4.2%
Si : 0.6% to 1.2%
Mn : Upto 1%
P : Upto 0.15%
S : Upto 0.15%

Pellets is one of the by-products of our iron ore mining process. We ensure strict quality control at every stage of our process. This ensures minimal defects in our by-products as well. Our pellets can be used in a variety of furnaces with ease.



Specification : Descriptions
Fe : 63 %
FeO : 0.50 %
SiO2 + Al2O3 : 8.00 % (Al2O3 2.00%)
S : 0.01 %
P : 0.045 %
TiO2 : 0.20 %
AS : 0.01 %
CaO + MgO : 2.00 %
Other Metals : .20 %

Our Iron Ore processing also yields Steel Billets - another one of our finest products. Our billets are tailored to withstand additional processing with ease to yield the next intermediate or final product.

Specification : Descriptions
BS 4449 Grade 460 : C: 0.18% to 0.23%
Si: 0.16% to 0.30%
Mn: 0.85% to 1.25%
ASTM A 615 Grade 40 : C: 0.22% to 0.31%
Si: 0.15% to 0.30%
Mn: 0.75% to 1.10%
ASTM A 615 Grade 60 : C: 0.32% to 0.38%
Si: 0.16% to 0.30%
Mn: 1.00% to 1.40%

Cement clinkers is our first product in our cement manufacturing process. Some of our clients prefer our cement clinkers due to its adherence to stringent quality standards during its manufacture - as a result, they do not have to worry about producing superior quality cement as their end product.

Cement, our main product of our cement manufacturing process, is widely used in various types of construction projects - industrial or domestic alike. Our clients prefer our superior quality cement because of our adherence to quality standards.



Specification : Descriptions
CaO : 63.50% to 64.00%
SiO2 : 21.20% to 21.70%
Al2O3 : 4.80% to 5.40%
Fe2O3 : 3.50% to 4.20%
MgO : Upto 3.90%
SO3 : Upto 1.12%
K2O : Upto 0.60%
Na2O : Upto 0.40%

Iron Ore is fourth most common mineral present in the earth’s crust. However, nearly 70% of the world’s produce comes from China, Brazil, Australia, Russia and India. We extract the ores from the earth’s crust, either process it and convert it to pig iron and pellets. Iron ore is the key raw material in the production of steel – one of the most popular, versatile and robust materials used today in most of the industrial products.


Specification Descriptions
Fe 56% to 57%
SiO2 5.8% to 6.2%
Al2O3 4.9% to 5.3%
Moisture Content Upto 14%
P Upto 0.07%
S Upto 0.04%

Our superior quality GP coils have been preferred for use in the automobile industry and construction sites. Our coils have consistent thickness throughout - this is a result of our strict quality control process. To add, our GP Coils can be very easily installed without incurring additional expenses.


Specification : Descriptions
Thickness : 0.11 mm to 2.0 mm
Width : 19 mm to 1250 mm
Zinc Coating : 80 to 275 gsm

This is one of our specialized products which are widely used for roofing especially in huge manufacturing units. Depending upon application, these are available as curved and straight. Our manufacturing process uses recycled materials - hence our sheets can be completely recycled - resulting in zero wastage.

Specification : Descriptions
Zinc Coating : Upto 275 gsm
Thickness : 0.25 mm to 1.50 mm
Coil Width : 900 mm to 1335 mm
Paint System : Primers, Epoxy, PU, Polyester / Universal
Top Coat: RMP/SMP/PVDF/SDP
Backer Coat: Epoxy, Polyester and PU
Gloss : Matt: 35% (+/-5%)
Semi-gloss: 60% (+/-5%)
High gloss: > 70%

Bauxite is the ore form of aluminium metal. Our bauxite is used in many industries ranging from cement to household products. We pride ourselves in being the suppliers of quality bauxite ore for this wide range of applications.

Specification Descriptions
Al2O3 42% to 47%
SiO2 4% to 10%
TiO2 3% to 4%
Fe2O3 10% to 25%
CaO 0.5% to 5%
Size 0 to 100 mm
Moisture Upto 5%

This is one of the alloys of iron produced by us and has a variety of uses ranging from steel products to paints and glass. Our quality control ensures that our products used to produce the end products are error free and of the best quality.


Specification : Descriptions
High Carbon Ferro Manganese Alloy : Mn: 70% to 75%
Si: Upto 1.5%
P: Upto 0.30%
C: 6% to 8%
S: Upto 0.05%
High Carbon Silico : Mn: 60% to 65%
Manganese Alloy : Si: 14% to 16%
P: Upto 0.35%
C: Upto 2%
S: Upto 0.04%

Our colour coated (pre-painted) GI coils consistently meet strict industry and quality standards. Apart from the organic coatings, our process ensures that the coils are coated in their entirety, leaving no gaps, especially at the edges. We have these in varying degrees of thickness - well suited to different requirements of our diverse clientele.


Specification : Descriptions
Coating Weight : Upto 275 gsm (Zinc)
Coil Thickness : 0.25 to 1.50 mm
Coil Width : 900 to 1335 mm
Paint System : Primers, Epoxy, PU, Polyester / Universal
Top Coat: RMP/SMP/PVDF/SDP
Backer Coat: Epoxy, Polyester and PU
Gloss : Matt – 35% (+/-5%)
Semi-gloss – 60% (+/-5%)
High gloss > 70%
Profiles : Sinusoidal, Trapezoidal, Ribbed, Mangalore Tiled

Our high grade CRCA (Cold Rolled Close Annealed) coils are widely used in various industries such as automobile, pharmaceutical, chemical, oil and gas industries. We guarantee that we meet our clients requirements by providing an assortment of grades and thicknesses of these coils. Hence, more clients prefer our coils due to these and our unfailing adherence to industry standards.

Specification : Descriptions
Thickness : 0.35 to 3.2 mm
Width : 750 to 1870 mm
Grades : CQ, DQ, DDQ, EDDQ, IF, HIF, HSS, Bake Hardening, High Strength Micro Alloyed, C-Mn High Strength, Rephosphorized, Dual Phase

Our collection of HR (Hot Rolled) Coils find applications in various requirements such as welding, laser cutting, forming, deep drawing and bending, to name a few. We supply HR coils in a varying thicknesses to fulfil the varied requirements of our diverse clientele. Our clients prefer our HR coils based on the quality control and reputation of our manufacturing process.

Specification : Descriptions
Thickness : 1.2 to 25.4 mm
Width : 900 to 2100 mm
Grades : Re-rolling/ Drawing Grades
Tube and Pipe/ Forming Grades
Structural/ Medium Tensile Tube/ Forming Grades
LPG/ Low Pressure Vessel Grades
HSLA Grades
Medium Carbon Grades
Weather Resistance Grades
Line Pipe Grades
Chequered Plates

Galvalume is one of our unique and specialized products that is best adapted for heating and ventilated consumptions. This is an enhanced galvanized iron product that has better corrosion resistance and longer life.

Specification : Descriptions
Thickness : 0.18 to 1.20 mm (BMT)
Width : 760 to 1350 mm
Standards : JIS G 3321, AS1397, EN 10215, EN 10215, ASTM A792 / A792M
Coating : AZM 150 to AZM 210

Nitrogen is a crucial element for the healthy development and growth of plants. Our product has a high urea content -this is an easily available and economical fertilizer.


Specifications:


Nutrient : Analysis
Total Nitrogen (N) : 6.0%
Water Soluble Nitrogen : 2.5%
Water Insoluble Nitrogen : 3.5%
Available Phosphate (PO5) : 2.0%
Calcium (Ca) : 1.2%
Total Iron (Fe) : 2.5%
Chlorine (Cl) maximum : 1.0%