Find Verified Industrial Tapes Films Suppliers, Manufacturers and Wholesalers

Industrial Salt
99% sodium chloride content
Bulk

Light / Dense Soda Ash
Sodium Carbonate (Na2CO3), commonly known as Soda Ash, may well have been the third "industrial chemical" used by man; perhaps employed sometime after salt (NaCl) and lime (CaO).

Total Alkalinity (as Na2CO3) % by mass 99.0
Chloride (as NaCl) % by mass 0.30-0.40
Iron (as Fe2O3) % by mass â?¤0.005
Matter insoluble in water % by mass 0.08
Sulphates (as Na2SO4) % by mass 0.07
Bulk Density gm/liter (Light Ash) 540-630
Bulk Density gm/liter (Dense Ash) 950-1200

Potassium Chloride KCl (MOP)
GOST 4568-95
(HS CODE 3104205000)
Potassium Chloride (commercially known as MOP) from PROJEX ONETM is the most widely used and cost-effective potassium fertilizer globally.

With an exceptional concentration of no less than 60% Potassium Oxide (K2O), this fertilizer ensures the delivery of intensive potassium doses to maximize the yield and quality of field and
industrial crops (such as wheat, corn, sugar beet, and cotton) that have a high tolerance for chloride ions.

Grade : technical. ..HS Code : 28332990.. CAS NO : 7446-197 .. Chemical Formula: ZnSO4.H2O
Chemical Properties :
Appearance: Dry free flowing white powder
Assay : 98% min
Matter insoluble in water: 1%max
Zinc content (As Zn) :33%min
pH (5% Solution) : 4.0min
Sulphur content (as S) :15% min
Magnesium content (as Mg) :0.50 % min

Ever Sol
FULLY SOLUBLE - SOP
0/ 0 / 50 + 18 S
Improves crop's nutritional value, taste, and appearance
Enhances crop health and vigor
Enhances plant resistance to environmental conditions such as drought, frost, insects and disease attack
Rich in Sulfur, which increases the availability of phosphorus and microelements in soil

Content Percentage
Potassium (KO) 50%
Potassium (K) 41.6%
Sulfur (S) 18%
Sulfite (SO) 46%

section background
Specification
It is more suitable for plants that need only K at the maturity stage to improve crop yield and quality.
Has a very low salt index, which makes it preferred to be used in case of risk from soil salinity.

Applications
Suitable for all fertigation systems (Sprinkler/ Drip/Pivot/NFT), and foliar applications (5-8 gm/L)

Packaging
25 kg
1.2 MT in a big bag
Bulk in Container
Bulk in vehicle

Calcium Nitrate Concentrated CA(NO3)2
PROD-5
(HS CODE 33CaO)
Calcium Nitrate from PROJEX ONEâ?¢ is the ultimate agricultural solution ensuring healthy growth, high yields, and premium crop quality. Because calcium is relatively immobile within plant tissues and does not translocate from older foliage to developing fruits and new growth, continuous application of calcium nitrate throughout the growing season is crucial to ensure adequate plant nutrition.the growing season is crucial to ensure adequate plant nutrition.

Available Packaging
50 KG - 1000 KG

Characteristics
Appearance
Granules *

Total Nitrogen (N), %, min
17

nitric N (N-NO3), %, min
16.7

ammoniacal N (N-NH4), %, max
0.3

Water-soluble Calcium CaO (Ca), %, min
33 (23.5)

Moisture, %, max
3

Insolubles, %, max
0.1

pH (1% solution), %
5.5 - 6.5

Granulometry: under 1 mm, %, max
5

Granulometry: 1-4 mm, %, min
90

Granulometry: under 6.3 mm, %
100

Granule static strength, MPa, min
2.0

Free Flowing, %
100

Advantages
Structural Integrity
Calcium is a fundamental component of calcium pectate in the middle lamella of plant cells, enhancing mechanical tissue firmness and preventing cellular collapse.

Abiotic & Biotic Stress Tolerance
Calcium acts as a crucial secondary messenger in signal transduction pathways under stress conditions. It maintains cell membrane stability and permeability, elevating plant resistance to heat, salinity, and fungal infections.

Post-harvest Physiology
Improves tissue firmness and reduces respiration and ethylene production rates, thereby significantly extending shelf-life and reducing losses during transit and storage.

Ion Synergy & Efficient Uptake
Readily available nitrate nitrogen (NO3-) provides a negative charge that stimulates the rapid and synergistic uptake of positively charged cations like calcium (Ca�²â?º) and potassium (Kâ?º), without the risk of nitrogen volatilization.

Mitigation of Physiological Disorders
Prevents the development of localized calcium deficiency disorders, such as Blossom End Rot in tomatoes and peppers, Bitter Pit in apples, and Tip Burn in leafy greens like lettuce and cabbage.

Fertigation Compatibility
Features high purity and is 100% fully water-soluble, making it ideal for use in fertigation technologies and hydroponic systems without causing emitter or irrigation line blockages.

PACKAGING options
Available in 25 kg bags and 1000 kg big-bags.

Transportation
Safe product suitable for transport by road, rail, and sea.

storage
Store in closed, well-ventilated warehouses (below 30�°C and maximum 50% relative humidity). Protect the product from direct sunlight, atmospheric precipitation, and groundwater.

Calcium Chloride (94-96%) CACL2

Our granular calcium chloride is manufactured according to the strictest global quality standards to precisely match industrial requirements

Available Packaging 50 KG - 1000 KG

Characteristics
CaCl2 Concentration
Min 94-96%

MgCl2 Max 1%

Moisture Max 0.5%

Insoluble Matter Max 0.2%

Particle Size (-3 mm to +0.5 mm) Min 85%

Advantages
Oil & Gas (Drilling and Completion Fluids)
Our calcium chloride is the most reliable additive in the engineering of drilling muds and completion fluids.

Mining & Excavation
A safe environment is the foundation of successful mining. Our product offers the ultimate solution for Dust Control in open-pit mines, underground operations, and unpaved haul roads. It aggressively absorbs moisture from the atmosphere and locks it into the soil, binding dust particles firmly to the ground. Radically improves operational visibility, safeguards workers' respiratory health, and ensures strict compliance with occupational safety and environmental standards (OSHA).

Wellbore Stability
Effectively prevents the hydration and swelling of clay and shale formations, protecting the wellbore walls from collapsing.

Density Control
Highly efficient in adjusting the density of drilling fluids to perfectly balance formation pressure.

Cooling & Lubrication
Significantly aids in cooling drill bits and reducing friction during deep operations. Desiccation: Extensively utilized as a powerful drying agent for petroleum fractions and removing moisture from gases.

Desiccation
Extensively utilized as a powerful drying agent for petroleum fractions and removing moisture from gases.

Highway Deicing & Winter Maintenance
The ultimate protective shield for critical infrastructure during extreme winter conditions. Exothermic Reaction: Upon contact with ice, it releases an intense surge of heat that rapidly accelerates the melting process. Freezing Point Depression: Lowers the freezing point of water to record levels (down to -52C / -62F), preventing the formation of lethal black ice on highways and keeping traffic and supply chains moving safely

Chemical Manufacturing
Serves as a highly reliable, strategic raw material for the production of various other calcium salts and acts as a potent industrial desiccant in numerous complex chemical processes.

PACKAGING options
Highly durable 25 kg bags for flexible handling inside facilities. 1 Ton Big Bags (Jumbo Bags), specifically engineered to withstand the rigorous transport conditions of major drilling and mining operations.

Storage
Store in dry, well-ventilated, and tightly sealed areas. Due to its aggressively hygroscopic nature (intense moisture absorption), it must be strictly protected from exposure to humid air to prevent caking and preserve its maximum efficacy.

Calcicoat Calcium Chloride Anhydrous 94% (High-Purity)

Now Available from Stock in Abu Dhabi | Bulk Supply

We are pleased to offer Calcicoat-Calcium Chloride Anhydrous 94%, a premium industrial-grade product now readily available from our central warehouse in Abu Dhabi, UAE.

**Offered by:**
ProjexOne General Trading LLC
Your trusted partner for specialty chemicals and industrial materials across the GCC and international markets.

**Product Highlights:**

* Purity: 94-97% Calcium Chloride (CaCl2)
* Form: White crystalline flakes, anhydrous
* CAS No.: 10043-52-4
* Molecular Formula: CaCl2
* Packaging: 1000 KG jumbo bags with moisture-proof inner liner, palletized for secure transport
* Availability: Immediate dispatch from Abu Dhabi warehouse

**Technical Specifications:**

* Melting Point: 772 C
* Boiling Point: 1670 C
* Solubility: Easily soluble in water, acetone, and alcohol
* pH (1% solution): 9
* Hygroscopic: Must be stored in dry, airtight conditions

* Regulatory Compliance:

* Conforms to EC Regulation 1907/2006 (REACH)
* Eye Irritation Category 2 (H319)
* Not classified as PBT or vPvB

**Logistics & Ordering:**

* Minimum Order: 1 x 20FT container (approx. 20 MT)
* Shipping Terms: EXW / FOB / CIF (based on buyer preference)

Lead Time: Immediate or within 7-10 days from order confirmation

Origin: United Arab Emirates

Contact Us for a Quotation:
We welcome bulk inquiries from industrial users, distributors, and global buyers. Kindly share your target quantity and usage, and we will provide a tailored quotation and technical support as needed.

Fuel Type : Ultra Low Sulfur Diesel (ULSD)
Standard : EN 590
Sulfur Content : 10 ppm (0.001%)
Cetane Number : 51
Density @ 15C : 820 - 845 kg/m
Viscosity @ 40 C 2.0 - 4.5 mm
Flash Point : 55C
Water Content : Very low (trace levels only)
Distillation : Controlled boiling range as per EN 590
Lubricity : HFRR 460 um
Appearance : Clear, bright, free from particles
CFPP (Cold Filter Plugging Point) Seasonal grades (summer/winter/arctic)
Aromatic Content : Controlled and limited

Urea 46% Granular
water content 0.5% max
2-4 mm particle size

PRODUCT NAME : NITRIC ACID 68%
FORMULA : HNO3
HS Code : 8080010
Appearance : Clear Colourless Liquid to Light yellow liquid
CAS NO : 7697-37-2
with the formula Total Acidity (as HNO3 by mass (Purity) % 68.00 % min, Specific Gravity (at 20OC) 1.4
Nitrous Acid (As HNO2) by mass 0.01 max , Chlorides (as Cl) by mass 0.0002 max ,Sulphates (as H2SO4) by mass 0.0002 max , Residue on Ignition by mass 0.002 max, Iron Content (as Fe) by mass 0.0001 max

Grade : Technical Grade
Formula : MgSO4.7H2O
HS Code :28332100
Appearance :White crystals
CAS NO : 10034-99-8
with the formula Assay % 98.00min ,Magnesium (as Mg) 9.60 min..pH(of1%aq.Soln) 6.5â??8.5,,
Heavy metals (as Pb and As) %NIL ,,Iron Content (as Fe) PPM 70 max ,,Water Insoluble matter % 0.05 max

Grade : Animal Feed...HS Code:28352500 ... CAS NO: 7789-77-7.. Chemical Formula: CaHPO4 ·2H20

Chemical Properties:
Description White or Off white Powder .
Moisture : 5.00 % Max
Calcium : 23.00 %Min
Phosphorus : 18.00 %Min
Fluorine :0.10 %Max
Acid Insoluble : 1.0 %Max
Ash Content : 73.5-78.0 %
Lead : 30.00 Ppm Max
Arsenic : 10.00 Ppm Max
Organic/Protein us Impurities :Nil
Fineness : 90 % will pass through 200 micron screen

Technical Name : Ferrous Sulphate .. Formula : FeSO4. H2O,,,,HS Code: 28332910 .. Appearance:White Powder .. CAS NO: 17375-41-6
Chemical Properties ..
Assay % 98.00min
Sulphur % 12.60min
Iron (as Fe) %22.60 min
Iron (as Fe)%0.04 min
Chloride %.0.05min
pHof5%soln. 2.5 -3.5

EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil

EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).

Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials

Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296

Packages size:
Available in drums and flexibags

Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

EQUINAS TFO 60i High Quality Inhibited Transformer Oil

EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).

Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials

Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296

Packages size:
Available in drums and flexibags

Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment.
Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene.
Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants

EQUINAS NBO 60u High Quality Naphthenic Base Oil

EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It is characterized by its composition of saturated cyclic hydrocarbons called naphthene.

Applications:
Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants

Features and Benefits:

Low-temperature fluidity: Naphthenic base oil has a low pour point and excellent low-temperature fluidity, making it suitable for use in cold environments.
Good solvency: Naphthenic base oil has good solvency, which allows it to dissolve additives and other chemicals that are added to lubricants and other products.
Good oxidative stability: Naphthenic base oil has good oxidative stability, which means it can resist degradation caused by exposure to oxygen.
Thermal stability: Naphthenic base oil can withstand high temperatures without breaking down or forming deposits.
Compatibility: Naphthenic base oil is compatible with a wide range of other materials, including elastomers, seals, and metals.
Environmental advantages: Naphthenic base oil is a naturally occurring substance, and its production process generates fewer harmful emissions and waste products than some other types of base oils.

Packages size:
Available in drums and flexibags

Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.

EQUINAS 8 is a high-quality Group III base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and hydrofinished to a colourless liquid.

The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.

Applications:
EQUINAS 8 is an excellent choice for formulating high performance engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.

Features and Benefits
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability

EQUINAS 6 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.

Applications:
EQUINAS 6 is an excellent choice for formulating high performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.

Features and Benefits
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability

EQUINAS 4 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.

Applications:
EQUINAS 4 is an excellent choice for formulating high-performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.

Features and Benefits:
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability

ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship.

Applications:

ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity
engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for
application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.

Features and Benefits:

Very high viscosity index
Excellent volatility for low viscosity engine oils
Superior low temperature performance
Good oxidation stability

Formulation Support:

ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications

ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.

Applications:

ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.

Features and Benefits:

Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability

Formulation Support:

ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications

Product Ethanol 99%
Origin - India
Avil.qty - 150 Mt
Ex-wh - Jabal Ali .dubai.
Packing Options
Ibc - 800 Kg
Steel Drums - 160 Kg
Hdpe Drums - 165 Kg

Product ethanol 69%
Origin - India
Avil.qty - 150 Mt
Ex-wh - Jebel Ali .dubai.
Packing Options
Ibc 800 Kg
Steel Drums 160 Kg
Hdpe Drums 165 Kg

Industrial Lubricants
Automotive Lubricants
Marine Lubricants
Greases
Coolants
Brake Fluids

A/C COMPRESSOR LR056364 / LR010723 FROM GENUINE RANGE ROVER
RANGE ROVER VOGUE 5.0 4X4 2009-2012 RANGE ROVER SPORT 5.0 4X4 2009-2013
JAGUAR XF X250 (5.0/5.0KOMPRESSOR/5.0XFR-S) 2009-2015
Part Number : LR056364

T-shirt Bags

Rice And Sugar Bags

SULFURIC ACID 98% - H2SO4
PROD-6
(HS CODE 04)
An essential pillar for industrial applications

Available Packaging 20L - 1000L

Advantages
Drip Irrigation System Cleaner
Actively dissolves calcification, salt buildup, and mineral deposits that clog drippers and irrigation networks. It restores your system's efficiency to 100% and significantly extends its lifespan, saving you thousands of dollars in maintenance and replacement costs.

Soil pH Reducer & Nutrient Unlocking
Thanks to its potent acidic nature, it neutralizes soil alkalinity (lowers pH) and breaks down calcium carbonate. This powerful reaction unlocks "trapped" macro and micro-nutrients in the soil (such as Iron, Zinc, and Phosphorus), making them instantly available for root absorption.

Direct & Rich Sulphur Source
Supplies the soil with fast-absorbing sulphate ions. Sulphur is a vital element required to complete complex biological processes within the plant, including vital protein synthesis, which directly reflects on crop vitality and overall yield.

Preventative Crop Shield
A calculated application of this acid enhances the plant's self-resistance against various diseases. Furthermore, it creates a highly unfavourably environment for the growth of soil-borne pathogenic fungi.

PACKAGING options
Supplied in heavy-duty, corrosion-resistant, high-density plastic jerrycans and drums weighing 35 kg, engineered to ensure entirely safe transportation and storage.

storage
Must be stored in cool, dry, and exceptionally well-ventilated areas, strictly away from direct sunlight, organic materials, and reactive metals.

Pipes

Checkered plate

Hot Rolled Plate And Cold Roled Plate

Deformed Bars

Billets

Fuel Pump - Right Side For " Audi & Volkswagen "
Part Number : 7L8919087B

Cylinder Head Valve Cover For " BMW "
Part Number : 11127646555

Engine Water Pump For " BMW "
Part Number : 11517586925

high pressure and flow Fuel Pump Assembly case for "Audi & Volkswagen"
Part Number : 3AA919051L

High Pressure Fuel Pump For "Mercedes Benz"
Part Number : A1330700001

Engine Oil Pump , Part Number : 94810701323

Purity Min. 99%
Oil Content Min. 50%- 52
Admixture Max.3%
Moisture Max: 6%
Foreign matter Max. 1%
FFA Max. 2%
Other color seeds Max. 2% - 5%

B. White sesame: First grade (Halawa)
Purity Min. 99%
Oil Content Min. 48%
Admixture Max.1%
Moisture Max: 8%
Foreign matter Max. 2%
FFA Max. 2%
Other colour seeds Max. 2%

Oil Content Min. 52%
Admixture Max.1%
Purity Min. 99%
Foreign matter Max. 3%
FFA Max. 3%
Other color seeds Max. 3%

Lubenz is an international lubricant brand that is functioned in types of lubricants such as industrial oils, Speciality oils, Marine oils, Agriculture, Machinaries lubricants, Motorcycle lubricants and Automotive lubricants fluids and all types of greases.
We have more than 1000 commercial products, including lubricants, special fluids, and greases used for passenger vehicles, commercial vehicles, and industrial equipment. One of the notable advantages of our products is that they maintain excellent operational properties in a wide range of temperatures.
We have an extensive network of distributors and strategic partnerships, which help promote our products in both local and international markets. At the global level, our presence is continuously expanding. LUBENZ Lubricants exports to more than 40 countries and has established foreign representative offices in the main key regions.
AUTOMOTIVE
Petrol Engine Oil Series SAE50, SAE60, SAE70, 0W20, 0W30 5W30, 10W40 , 15W40, 15W50 , 20W40 , 20W50,
Diesel Engine oil Series SAE 50, 5W30, 10W30, 10W40, 15W40, 15W50 ,20W40 , 20W50.
ATF Series ATF DEX II , DEX III , DEX VI, CVTF.
Gear Oil Series SAE-API GL-5, SAE-140 API GL-4

AGRICULTURE OILS
AGRI 10W-30
AGRI 15W-40
AGRI 10W-40
AGRI Power Transmission Oil 4 SAE 10
AGRI Power Transmission Oil 4 SAE 30
Hydraulic HVLP Series 15, 22, 32, 46

INDUSTRIAL
Hydraulic Extreme Vibranium series
ISO 32,ISO 46, ISO 68, ISO, ISO 100, ISO150, ISO 220.
Heating Oil Extreme Vibranium series 10, 32, 68.
Compressor Oil VDL Series 32,46, 68, 100, 150, 220, 320
Hydraulic HLP Series 32, 46, 86 , 320, 460

GREASES
Grease Ca-EP series
Grease Ca-MP series
Grease HT-EP series
Extreme Grease EP series
Extreme Grease MP series
Grease OG Graphite series
Complex Grease
Silicon Base Grease
Sugar Mill Grease

MARINE
Marine Cylinder Oils
Marine Engine Oils
Marine System Oils

MOTORCYCLE
4 Stroke SAE20W40 API SN
4 Stroke SAE 20W50 API SN / JASO MA2
2 stroke Engine Oil API TC / JASO

SPECIALITY OIL
Transformer oil.
Brake fluid DOT 3, DOT 4.
Coolant 40%, 50%, 100%.
Thermic Fluid series.
Rock Drill oil series
Cutting Oils.
Food Grade Grease and lube.

HEAVY DUTY
Heavy Duty 10W-40
Heavy Duty 15W-40
Heavy Duty 20W-50 E7
Heavy Duty SAE 50
Heavy Duty SAE 30
10W-40 Low SAPS Premium
Heavy Duty Longlife 75W-80

SPECIALTY OILS
Transformer Oils
Spindle & Sewing Oils
Rock Drill Oils
Soluble Cutting Oils

100 % pure with certificates.
In Water Soluble in water
In Ethanol Insoluble A ethanol
Moisture content 9.83
optical rotation -29.99
PH 4.34
Ash content 3.35
Arsenic content <0.05
Lead content <0.05
Heavy metals content <0.05
Nitrogen content 0.33
Protein content(NCF of 6.6) 2.18
Salmonella species Absent
Escherichia coli Absent

Moisture: 15% Max.
Optical Rotation: (-25) (-35)
PH: 4.0 - 4.8
Viscosity: 30 - 200 cps
Particle Size: 0.5 -28mm

Moisture: 15% Max.
Optical Rotation: (+45) - (+60)
PH: 4.3 4.6
Viscosity: 30 - 150 cps
Particle Size: 0.5 - 22mm