Find Verified Solar Power System Suppliers, Manufacturers and Wholesalers

DISINFECTION CABINS
DEFENCE cabin capabilities
It works through touch receivers when a person takes his/her place in the cabin

It reports on the working condition of the cabin and the amount of disinfectant remaining in the tank
Body temperature control system
* Additional option

The cabin is equipped with a ramp

SWG-12 Mobile Cable Test and Fault Location System - is a complex solution for safe, fast and easy locating a faulty place on low and medium underground voltage cables. It includes a powerful high-voltage unit, which has a test, burn and surge generation modules, and a time-domain reflectometer for locating faults on cables.

Main features:
- Suitable for portable application
- Easy to operate
- Multiple fault location methods included
- 10.4 High-contrast color TDR display
- Improved convenience for operator
- Heavy duty

The high-voltage unit of the system provides with high-power up to 1100 Joules surges at 3; 6 and 12 kV ranges. At each range, the output voltage is smoothly adjustable. The rate of surge waves can be smoothly adjusted. The single manual shot option is also included. The DC output mode is provided for quick fault diagnostics. The 100 mA burn mode is available.

Digital Impulse Reflectometer (TDR) provides you with 10.4-inch bright high-contrast TFT display with touchscreen. The 800 Ã? 600 pixels resolution makes the picture sharp. The touchscreen allows an operator navigate through the menu fast and easy. An alternative way of navigation is included. It is provided with a control knob.

Reflectometer RIF-9 integrates a multiple ways of fault prelocation. It can be used either as a standalone device in TDR mode or in a conjunction with HVmodule, working in arc reflection mode.

Reflectometer RIF-9 has USB interface. The package content includes software for PC (optional), which allows working with saved reflectograms. The firmware can be easily updated through USB interface by inserting a flash drive.

A great solution for cable diagnostics and fault location, the new vehicle-mounted system ETL-4V provides DC cable testing up to 4 kV and fault prelocation with the Time-Domain Reflectometer RIF-9. The key features of the test system include high surge energy, primary high voltage prelocation techniques, straightforward and safe operation.

With millions of units already installed, this system impresses with incredible, tried-and-tested stability and a wide range of designs.

Technical details
70 mm construction depth
Uf=1.3 W/m�²K
Uw=0.99 W/m�²K with standard-triple-glazing with Ug=0.6 and Psi=0.040 W/mK
Uw=0.76 W/m�²K best possible option with triple glazing with Ug=0.4 and Psi=0.030 W/mK
Up to RC2 burglary protection
Up to 45dB (sound protection class 4)
Up to 41 mm glazing
Wide range of laminations available
Available with aluskin�® aluminium shells (wide array of colours)
Recessed option, semi-recessed option, roundline option
5 chamber profile
Concealed drainage is possible
Optional: bonding inside (adhesive technology)

The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz.

The main difference between series devices Cable test and diagnosis system HVTS-HP devices from Portable Hi pot Tester HVTS-70/50 is the increased power output. There are two standard versions: 7.5 KVA and 17.5 KVA.

VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables.
Testing principle
Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves.
Main features
Efficient non-destructive cable withstand testing
Portable, perfect for field testing
Fully automatic testing cycle
Automatic discharging
Easy maintenance due to solid-type insulation system
Breakdown voltage measurement and load recognition
Easy-to-use software
Does not need an external PC
LCD touch screen

GreenPower company produces and sells filter elements of various capacities multicyclone or battery cyclone. It belongs to a group of mechanical cleaners with dry cleaning method of high efficiency. Cleaning efficiency from particles sized 5-10 μm is 90%, while from particles that are larger is 99%. Production of cyclone elements from basal castings of modular construction improves their efficiency, durability and simplified assembly. Possible places of multicyclone (battery cyclones) using: ferrous and non-ferrous metallurgy enterprises, granaries and processing plants, bread-baking complex, oil-extraction plants, starch plants, energy industry, cement plants, chemical industry, coal industry, gas pipelines.

Greenpower is a company that develops and manufactures environmentally friendly equipment for charcoal production since 2001, presents new charcoal kiln ck-4 euro.

Charcoal kiln ck-4 euro refers to fourth generation of charcoal kilns of euro type, which are designed for low-temperature pyrolysis of carbon-containing materials (lump wood waste of logging and woodworking industries, firewood of soft and hard species, fuel briquettes (pini-kay, nielsen, nestro, ruff)) to obtain high quality charcoal and heat energy.

The uniqueness of the euro kiln technology is following: we do not move raw material from chamber to chamber, we move the process that provides high performance at relatively low cost.

Charcoal kiln ck-4 euro is capable of producing up to 70 tons of high quality charcoal per month. The main advantages of ck-4 euro are: mechanization and automation of control of charcoal kiln operation, remote control, alarm mode, the complete absence of emissions during operation and others.

GreenPower company offers the best-quality charcoal from pini-kay briquette produced by law-temperature pyrolysis. Pini-kay briquette charcoal is suitable for use in metallurgy as well as for domestic use - fireplaces, barbeques, etc. It is eco-friendly product and does not emit any smoke and smell.
Technical specifications:
Material - 100% hardwood briquettes
Fixed carbon content is more than 85%
Ashes content is no more than 1%
Volatiles content is no more than 12%
Burning time is more than 5 hours.
Packaging sizes and materials can be discussed..

GreenPower company specializes in the design and manufacture of complexes, allowing to neutralize - to utilize MSW (municipal solid waste), industrial waste, medical waste, port waste, quarantine and other hazardous waste in the place of their formation, thus eliminating the need for daily removal to the utilization site. Our complexes are designed for complete and absolutely safe neutralization of medical waste and other hazardous waste. The waste processing (waste utilization) or waste destruction is provided by method of THERMOCATALYTIC NEUTRALIZATION OF WASTE - environmentally friendly process. This development combines two key technologies, which are recognized by the world environmental community and the project "Europe, free from toxicants-2" as promising and close to industrial use. Complexes can be developed with capacity of 100 kg/hour, 300kg/hour, 500 kg/hour and 1000 kg/hour. If you have any questions, please donâ??t hesitate to contact us by phone +380577174464 or send us email to info[at]piroliz.org

Drying complex or drying chamber (dryer for firewood, wood dryer) is designed for quick drying of technical wood or fuelwood (firewood with a moisture content

LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch.

LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output.

The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate.

A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω).

MAIN FEATURES:

Portable and lightweight
Moistureproof and dustproof case
Advanced LiFePO4 internal battery with fast charging option
High-contrast graphic OLED display
Multifrequency operation
Operating frequencies can be changed upon request
Internal transmission loop antenna
Automatic load impedance matching
Ability to work with energized 0.4kV cables (inductive connection)
Overload protection
Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.

Rotor types X-shaped (90 angle) Height x Width x Depth/Passage Width (mm) 2208x 1510 x 1194/650 brushed stainless steel The Raptor X Max full-height turnstile is the optimal choice for facilities that require maximum perimeter security. Thanks to the new design of the mechanism, the turnstile is reliable in operation, and at the same time is able to perform its functions in any climatic conditions. The blocking system completely excludes unauthorized passage through the turnstile due to constant smart-control of its state, which means that it can be used in places where it is impossible or irrational to organize a guard post. At the same time, "Raptor X Max" is universal in connection, and can be integrated into an existing access control system at the facility, or into any system of your choice.

Rotor types Y-shaped (120 angle)
Height x Width x Depth/Passage Width (mm) 2208 1510 1330/650
Case brushed stainless steel
The Raptor Y Max full-height turnstile solves the problem of restricting access for facilities with high perimeter security requirements. The Y-shaped modification leaves more room for passage, making it faster and more comfortable for the user, while maintaining absolute reliability of protection against unauthorized access, thanks to the locking system with smart-rotor position control function. The new mechanism was developed taking into account the high requirements for operational characteristics, including climatic conditions and reliability, therefore not requiring frequent maintenance, which gives the option to use the turnstile in places where it is difficult to set-up a permanent guard post. Raptor Y Max can be integrated with most access control systems available on the market, which means you can use it as part of an existing access control system, or choose the option that best suits your needs.

The sensor temperature measuring of the steel equipment or axle bearing is designed to measure the temperature of axle boxes with the transferring data to wagon controller. The temperature sensor is attached directly to the axle box cover with a bolted connection. The power element of the temperature measuring sensor is a built -in battery.
Fastening type bolted joint;
Range of working temperatures 40 + 85 C
Range of measured temperatures 40 + 125
Accuracy of temperature measurement 0.5
Frequency plan EU433 ;
The period of communication is adjusted;
Type of antenna built-in ;
Sensitivity -114 dBm ;
Radio communication range in the tunnel up to 100 m ;
Transmitter output power up to 20 mW ;
Built-in battery capacity 2700 mAh ;
Continuous battery life p to 2 years ;
Dimensions, mm not more than 119 x 32 x 32 ;
Weight, g, not more than 300 ;
Total service life, years, not less than 10 ;
The operating mode is long ;
Dust and water protection rating IP65.

Flipper is an automatic contactless sanitizer dispenser.
Key parameters: - Motion detection sensor; - Temperature measurement (option); - Access control device management (door, turnstile or barrier); - Fast sensor response (2-3 seconds for one person); - Tank volume 2.2 liters; - Backlight. Dimensions HxWxD (mm) 1339x230x204.
Shell: painted ferrous metal.

Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval.


Circuit breaker tester UPA-3 is a mobile device, which could be easily transported to a required testing location.


Circuit breaker tester UPA-3 operates on the principle of varying the power in the primary circuit of the matching power transformer and, respectively, varying the output current, flowing through the automatic circuit breaker under the test. Power regulation could be done either through an external regulator (RNO or VR) or through a built-in thyristor controller.

Vivassens products are the scientific discovery, very powerful natural immunostimulants and immunomodulators. strengthening of immunity is already seen during the first period
of treatment (2 weeks). the results of preclinical studies have shown its high efficiency. due to its special form (paste) the absorption of all useful materials, vitamins, amino acids, micro and macro elements, photocompositions, begins in the mouth ( the action of fulvic acid, a very powerful catalyst) before they enter the stomach, away from the hydrochloric acid action. chelated vitamins and minerals (digestion only together with amino acids) are the best and most effective way of their absorption.

We offer the following types of bio-paste:

Industrial Long-wave Infrared Heater TeploV P4000 powerful 4 kW ceiling-mounted heater for large premises from Ukrainian manufacturer.

Technical Specifications:

Rated power: 4000 W (4 kW)
Heating area:
Main heating: up to 40 m² (to +20C at -26°C outside)
Additional heating: up to 80 m²
Spring/Autumn season: up to 80 m²

Dimensions: 1540- 436- 72 mm
Weight: 20 kg
Voltage: 380 V (three-phase, suitable for industrial networks)
Minimum installation height: 3.5 m (recommended up to 20 m)

Key Advantages:

Completely silent operation - no fan, no noise
Long-wave infrared technology - directly heats objects, floors and people (comfortable even with lower air temperature)
Does not dry the air and does not raise dust
High energy efficiency
Robust metal body, powder coating, fire safety class A
Long service life up to 25 years

Applications:
Warehouses, production halls, factories, workshops, sports halls, concert venues, airports, railway stations, agricultural buildings (farms, greenhouses), shopping centers and other large spaces with high ceilings (up to 20 m).

Wholesale Price: from 322 USD / piece (14 000 UAH) depending on quantity and Incoterms
MOQ: 100-200 units (negotiable)
Warranty: 10 years
Certificates: CE (European Certificate of Conformity), UkrSEPRO, EN 60335-1, EN 55014-1 and other European safety & EMC standards.
We are a direct manufacturer and exporter from Ukraine. Ready to supply any quantity on CIF terms to UK and Europe. Full package of export documents provided.

Looking for reliable distributors and wholesalers in Europe (especially UK), Middle East and Asia.

Long-wave Infrared Heater TeploV B1350 â?? modern and energy-efficient ceiling-mounted heater made in Ukraine.
Key Specifications:

Rated power: 1300 W
Heated area: up to 13 m² (as main heating at -26C outside â-+20C inside)
up to 22 m² (as additional heating)
up to 17 m² (spring/autumn season)
Dimensions: 1540-152- 40 mm
Weight: 7 kg
Installation height: 2.5 - 3.5 m
Voltage: 220-230 V

Main Advantages:

Completely silent operation - no fan, no noise
Long-wave infrared heating -heats objects, floors and people directly, not just the air
Does not dry the air and does not raise dust - ideal for homes with children and elderly people
High energy efficiency
Quick and comfortable heating
Safe for adults and children (European safety standards)
Fire safety class A
Easy ceiling installation with standard brackets

Applications:
Perfect for residential premises (apartments, children's rooms, living rooms, country houses, cottages), offices, workshops, local workplace heating, livestock farms, greenhouses and winter gardens.
Warranty: 10 years
Certificates: CE (European Certificate of Conformity), UkrSEPRO, compliance with EN 60335-1, EN 55014-1 and other European norms.
We are a Ukrainian manufacturer and exporter. Ready to supply in any quantity.
We provide full technical documentation, photos, and support with export documents.

Looking for reliable distributors and wholesalers in Europe (especially UK), Middle East, Asia and other regions.

VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables.
Testing principle
Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves.
Main features
Efficient non-destructive cable withstand testing
Portable, perfect for field testing
Fully automatic testing cycle
Automatic discharging
Easy maintenance due to solid-type insulation system
Breakdown voltage measurement and load recognition
Easy-to-use software
Does not need an external PC
LCD touch screen