Appearance pale yellow , viscous , clear liquid
Moisture0.25 % max.
F.F.A. ( as oleic ) 1.00 % max.
Acid value ( mg koh/g )2.00 % max.
Iodine value (wijs)82 û 90
Saponification value (mg koh/g )177 û 185
Hydroxyl value158 û 163
Relative density @ 30¦c 0.954 û 0.960 gm/ ml
Colour on lovibond in 5.25öcelly- 20.0 max. R - 2.0 max.
Colour garner4 g max.
Viscocity dpa s9.5 - 11
Pressured polyethylene three-layer black/white hose (bag) - diameter 2, 7 m. Thickness 240 mkm lenght 60 m - can contain 200 tons of grain or silage outdoors just in fields during two years.
Length - 11.80mtrs.
Dia. - 1.82mtrs.
Wall thickness - 14mm.
Weight - 8mt./pipe.
The Pipes are spiral welded
The pipes external surface is plastic quoted.
The innner surface of the pipe is painted.
1434 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
It consists of glass plastic material cores or basalt plastic material cores with the diameter from 4 to 40 mm, length up to 12 meters ( it might be rolled in a coils) with the ribbed surface of a spiral shape. The composite armature is intended for applying in concrete structures with the pre-stressed and non-stressed reinforcement instead of using the traditional steel armature.
Steel coil
Steel grade: st. 3ps
2 x 1000 x c û 390 mt
2 x 1250 x c û 130 mt
3 x 1000 x c û 260 mt
3 x 1250 x c û 130 mt
4 x 1000 x c û 130 mt
Total quantity: 1040 mt
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars.
For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin.
We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Iron ore with Fe2O3 content 70%.
Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%.
Iron ore with Fe2O3 content 60%.
Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%.
As a further step we are ready to provide you with product samples via DHL courier service and arrive to your place for negotiations at any time convenient for you.
Glycerin (quality Category 3), fee human consumption, as typically UCO, typically meeting andguaranteeingcritical Quality parameters as follows:
- glycerol 75,0% min
- water 15.0% max
- ash content 7.5% max
- methanol 0.3% max
- mong 10 max
- KOH + sulfuric acid
Price is subject to calculation based on delivery place.
Wire of grades Sv-08G2S and Sv-08GS is used in shipbuilding, in car building, in boiler building, in assembly work, in construction for welding metal structures, in the automotive industry, in agricultural engineering.
For automatic and mechanized welding and surfacing of carbon and low-alloy structural steels in shielding gases (DSTU EN ISO 14175): carbon dioxide (DSTU 4817), argon (DSTU GOST 10157) and a mixture of carbon dioxide and argon, submerged arc welding (DSTU EN ISO 14174).
Wire grades Sv-08G2S and Sv-08GS are used in shipbuilding, car building, boiler building, installation work, construction for welding metal structures, the automotive industry, and agricultural engineering.
Chemical composition, % (steel grade Sv-08G2S)
Manganese: 1.80-2.10;
Carbon: 0.05-0.11;
Silicon: 0.70-0.95;
Chrome, no more: 0.2;
Nickel, no more: 0.25;
Sulfur, no more: 0.025;
Phosphorus, no more: 0.03.
1434 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
