Find Verified Automobile Jacks Suppliers, Manufacturers and Wholesalers

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).

Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.

The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:

L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);

- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%

Components and service parts for:
- trucks
- tractors
- automobile cranes
- road engineering
- quarry equipment

Trailed cultivators
Designed for continuous pre-sowing cultivation of the soil with simultaneous cutting of the root system of weeds, grinding, leveling (rolling) the surface of the field, as well as for the care of couples. Cultivators have a powerful frame design, successful placement of working bodies in rows, which allows processing the surface layer of the soil without clogging with plant debris. Cultivators in the process of execution of the process create a uniform pre-sowing bed. The depth of tillage is set by the depth adjustment mechanism and the hydraulic cylinders of the cultivator's lifting-lowering.

Combine trailed fodder
mows and picks up dried seeded and natural herbs from rolls, mows maize and other high-stem crops with their simultaneous grinding and loading of crushed mass into vehicles, which is used for direct feeding to cattle or making haylage, granulated and briquetted fodder, grass flour and silage.

Very effective in protection against corona virus

High technology filters out nearly 95% of airborne dust particles, germs, seasonal allergies, smoke, auto exhaust gas, PM 2.5 pollution ash.
FILTERS THE AIR YOU BREATH IN - Our KN95 mask / hay fever mask keeps you safe from air pollution. This year-round air pollution mask can be used in all weather conditions protecting you from fog, smog, dust, odors, saliva, vehicle exhaust, air pollution and humidity keeping you healthy and safe.

We are a manufacturer of Ferrous and Non-Ferrous metal components. We are specialized in manufacturing of all kinds of Brass Extrusion, Casting, Forging & Foundry Components and Parts and we have experience of Engineering for various industries.

We are specialized in:
Brass components for Air Conditioning, Refrigeration & Heat Pumps.
Brass Pneumatic & Hydraulic Fittings

Manufacturer of aluminum profile processing equipment, manufacturing and sales of broken aluminum doors and windows and plastic steel door and window processing equipment . To be satisfied with products, create a strong brand, internal plastic quality, and external image, with its high, precise, sophisticated and specialized operation mode, and good reputation, it has become a benchmark brand in the same industry at home and abroad.

One of our hot products:
High precision digital display double head aluminum profile extrusion cutting saw machine
Main features:
Main Features
1.Used for Aluminum profile high accurate Cutting
2.Imported Linear bearing system in moving and feeding device ensures the accurate the machine running and cutting, and stable performance.
3.Digital display system equipped can be easy readout the accurate cutting length and quantity automatically, ensures a high accurate re-load position and easy operation . 4.Pneumatic -hydraulic damp device ensured the saw blade stable feeding and working. 5.cutting angle change Automatic between 45, (outward)and 90,.
6.Imported carbide saw blade for a high quality cutting and long service life. 7.Automatic Safety system of shield can ensure the safe operation .
8.Spraying cooling system, make sure carbide saw blade long service life

Main Technical Parameters

Power supply: 380v 50Hz
Weight: 1400Kg
Motor power; 2*2.2KW
Cutting width max: 135mm
Motor rotary speed: 2800r/min
Cutting angle: 90, and 45, (outward)
Operation air pressure: 0.5~0.8Mpa Feeding speed 0~3m/min
Saw blades length: 370~4200mm
Saw blade specification: 500-304.4mm Z=120
Air consumption: 60L/min
Dimension: 5500mm1750mm1990mm
Cutting height: 200mm90,;190mm45,

Flour is produced from white wheat of soft varieties according to DSTU 46.0004-99 and ISO 22000.
It is also possible to produce wheat flour according to the buyer 's specification.
Flour is supplied:
In paper bags with net weight of 1.8 and 2 kg;
In PP bags net 25 and 50 kg;
In containers min. 20 ft.
We operate under the terms of FCA, CPT, FOB, CIF.
Possibility of shipment by trucks and rail transport.

Quality indicators:

Extra grade flour: First grade flour:
Moisture 14,3 % Moisture 14,5 %
Gluten 26 % Gluten 27 %
Protein 11,5 % Protein 12 %
Whiteness - 58 Whiteness 39
Ash 0,53 Ash 0,72
Fall number - 362 Fall number - 350

Sunflower oil, cold pressed.
We can propose cold pressed seed oils:
- Seabuckthorn oil,
- Pumpkin oil,
- Rosehip oil,
- Thistle oil,
- Walnut oil,
- Grape seed oil,
- Wheat germ oil,
- Hemp seed oil,
- Burdock oil,
- Amaranth oil,
- Poppy seed oil,
- Soybean oil,
- Mustard oil,
- Sesame oil,
- Rapseed oil,
- Peanut oil and others.
All oils are of Ukrainian origin.

All our tea is 100% pesticide free. The factory we source our tea from is Rainforest Alliance (SAN) certified, ISO 22000 certified, participants in the Ethical Partnership (ETP), members of the Tea Board of Kenya and Kenya Board of Standards (KEBS) approved.

We've got some Orthodox grades too (FOP, GFOP & SFTGFOP) Other grade varieties are also available upon request. We highly encourage most buyers to know what their market needs are (preferably the exact grades) for us to be able to serve them better and offer any advise on our end.

Specifications according to the National Standards of Ukaine (Quality indices of CORN (DSTU 4525:2006))

For Serious Buyers only. Product is available and can be shipped to the port when terms are agreed upon.

Constructions equipment (Hyundai)
- material handler
-Telescopic dipper
- Front shovel
- Rail guide
- High reach demolition
- Super long reach
- Log loader
- LOADER LOG GRAPPLE
- LOADER PALLET FORK
-
Excavators-
- Large Excavators
- Medium Excavators
- Small Excavators
- Mini Excavators

- Loaders-
- Skid loaders
- Backhoe loaders
- Wheel loaders

Crude degummed soyabean oil, Ukrainian origin. 24 metric ton can be trial shipment and can be 500-1000 metric tons per month

Quality of the Goods:
FFA, max % 1.25
Moisture and volatiles, max % 0.20
Phosphorus, max ppm 200
Unsaponification matter, max % 1.5
Insoluble impurities max 0.1%
Colour (Lovibond): not darker than 50 yellow plus 5.0 red

Used Tyres Scrap

Refined Cooking/Edible Oils.
Refined sunflower oil......
Refined Coconut Oil.....
Refined Soybean Oil....
Refined Corn Oil....

Almonds

Packing:
PET bottles:
500 ml, 900 ml, 12 x 1 liter, 15 x 1 liter, 6 x 2 liter, 4 x 3 liters
Cans: 5 liters, 10 liters, 15 liters, 20 liters.
Canisters HDPE: 4 x 5 liters, 10 liters 17 liters, 20 liters 25 liters.
Can-in-box: 15 liters, 20 liters.
Steel Drums (tight head): 192 kg / 210 liters.
Tight-drums: 192 kg / 210 liters

Icumsa 45 White Sugar.

Customizable fittings for bathroom and Kitchen. Faucets, wash bashins etc

1. 50%, 60%, 70% corn cob

1) Appearance: yellowish to brown powder

2) Moisture: 2.0% max.

3) Particle size (20 meshes): 90.0% min.

4) Trimethylamine: 200ppm max.



2. 50% silica

1) Appearance: white powder

2) Moisture: 2.0% max.

3) Particle size (20 meshes): 90.0% min.

4) Trimethylamine: 200ppm max.



3. 70%, 75% liquid

1) Appearance: colorless liquid

2) pH value: 6.5 - 8.0

3) Trimethylamine: 200ppm max.

4) Heavy metal: 20ppm max.



Products:

1) 50%, 60%, 70% corn cob powder

2) 50% silica powder

3) 70%, 75% liquid solution

4) 98% crystalloid