Supplier From
Kiev,
Ukraine
Supplier From
Kiev,
Ukraine
Cranck shears
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model - 3418+
¦a) thickness*width of the sheet ,mm 6,3*3150
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 11,8
Dimensions, mm 4000)1900)1700
Weight, kg 6200
Guillotine shears model -- 3316++
Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3316++
¦a) thickness*width of the sheet,mm 4,0*2500
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type manual
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 8,5
Dimensions, mm 3300)1630)1520
Weight, kg 3870
Guillotine shears model -- 3314+
Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/
The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3314+
¦a) thickness*width of the sheet,mm 2,5*1600
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type Manual/screw
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 3,2
Dimensions, mm 2300)1570)1470
Weight, kg 2000
Guillotine shears model -- 3416
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3416
¦a) thickness*width of the sheet, mm 4,0*2000
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 5,6
Dimensions, mm 2610)1600)1510
Weight, kg 2870
Guillotine shears model --478
Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-.
Specification
Maximum thickness, mm 16
Maximum width, mm 2200
Mains current 3 phases, AC
Frequency, Hz 50
Operating voltage, V 380
Stroke frequency 20
Engine power, KWt 30
Dimensions, mm 3150/2275/2350
Weight, kg 9800
Guillotine shears models --+ 3214
Model --+ 3214
¦a) thickness*width, mm 2,5*2500
Stroke frequency, p/min 33
Main drive,KWt 3
Dimensions, mm 3120)2000)1330
Weight, kg 1800
Crank metal sheet guillotine shears model --+ 6020
H6 * L2500mm
Designed for the sheet cutting with the thickness up to 6 mm.
Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/
Specification
Max cutting thickness, mm 6
Max cutting width, mm 2500
Stroke frequency, min-1 50
Power, KWt 8,5
Dimensions, mm 3400)1400)1450
Weight, kg 3650
