Find Verified Tattoo Needles Suppliers, Manufacturers and Wholesalers

Device Application Areas:

Firstly, it can easily remove all tattoos, colored or colorless, thanks to its power.

Blemish Removal: Acne scars, birthmarks, age spots, sunspots, freckles, moles

Carbon Peeling

Hair Lightening

Skin Renewal, Brightening, Tone Equalization, Whitening

Skin Firming

Wrinkle Removal

Skin Rejuvenation

Appearance of Capillary Veins and Visible Dark Circles

Tattoo Removal

Permanent Makeup Removal: Eyebrow Contouring and Lip Contouring

Nail Fungus

Use with Hyaluronic Acid Serums: Tightens pores. Repairs damaged tissue. Maximizes the skin's moisture level.

Use with Acne Serums: Suitable for treating oily, acne-prone, and problematic skin.

Use with Hair Serums: Accelerates circulation in the scalp, helps prevent breakouts, and promotes thicker hair growth.

Use with DNA Serums: Helps repair loss of elasticity and wrinkles with DNA serums, and strengthens the skin's connective tissue to prevent sagging.

Areas of Use
1. Skin Renewal, Rejuvenation, and Firming

2. Wrinkle, Spot, Acne, and Under-Eye Bag Treatments

3. Activation of collagen cells, increasing skin elasticity and radiance

4. Fine lines and crow's feet on the face, etc.

5. Hair Mesotherapy; Features: Volume and speed are adjustable.

Medical Syringe

Size : 2 ml, 3 ml, 5 ml, 10 ml

Medical Syringe

Size : 2 ml, 3 ml, 5 ml, 10 ml

Product Code Product Description

PRS-CM0058 Gillimore Apparatus

STANDARDS : ASTM C91, C141, C150, C266; AASHTO T154

The PRS-CM0058 Gillmore Apparatus is used to determine the setting time of cement hydraulic hydrometer lime and mortar. Apparatus consists of two horizontally positioned arms, carrying weighted needles, initial needle has a 2.12 mm diameter and 113.4 g in weight and the final needle has a 1.06 mm diameter and 453.6 g in weight.

Dimensions 300x100x300 mm
Weight (approx.) 2,5 kg

Product Code : Product Description

PRS-ZE0665 : Spring Type Proctor Penetrometer

PRS-ZE0666 : Needle Set for Proctor Penetrometer

(28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23 and 4.52 mm diameters)

The PRS-ZE0665 Spring Type Proctor Penetrometer is used for establishing the moisture-penetration resistance relation of finegrained soils. The apparatus consists of a spring loading device which is graduated from 10 to150 lbf in 2 lbf subdivisions.

Needle Set for Proctor Penetrometer consist of interchangeable needle points of 28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23, 4.52 mm diameters and a carrying case.

Dimensions : 540x260x60 mm (packed)
Weight (approx.) : 5 kg

We are producing in own factory the protective medical face mask of FFP2. Eu accredited Certificate, ISO 9001:2015 and other certificates.

Some of the medical consumables and equipment are;

Syringe
Needles
Disposable plastic gloves
Disposable face mask
Hand sanitizers
Disinfectant
Blood Glucose Test Strips

Product Code Product Description

PRS-CM0050/A Vicat Test Set EN

PRS-CM0050/E Vicat Test Set ASTM

PRS-CM0051 Vicat Apparatus (Frame)

PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm

PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm

PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia.

PRS-CM0053/A Vicat Needle ASTM 1 mm dia.

PRS-CM0054 Final Vicat Needle EN 1.13 mm dia.

PRS-CM0055 Consistency Plunger 10 mm dia.

PRS-CM0056 Supporting Glass Plate

PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050

PRSGT-1305 Glass Thermometer Max. 110°C

PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2

STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131
The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method.
PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water.
The Vicat Test Set is supplied complete with;
Vicat Mould
Initial and final Needles (for EN )
Vicat Needle (for ASTM)
Consistency Plunger
Supporting Plate
Glass Thermometer
Transfer Dish (for EN)

Dimensions 150x190x318 mm
Weight (approx.) 3 kg

Black Nitrile Gloves - 100 pcs

Black Nitrile Gloves provide excellent protection, durability, and comfort for a wide range of professional and everyday tasks. These gloves are latex-free and powder-free, making them a safe choice for users with latex allergies and ideal for environments that demand cleanliness and strength.

Box of 100 Gloves: Disposable, ambidextrous gloves for convenient, hygienic use.

High-Quality Nitrile Material: Strong resistance to punctures, chemicals, and oils.

Latex-Free & Powder-Free: Safe for sensitive skin and reduces contamination risk.

Textured Fingertips: Improved grip and control, even in wet or oily conditions.

Professional Black Color: Ideal for tattoo studios, automotive work, salons, food service, and cleaning tasks.

Comfortable & Flexible Fit: Designed for extended wear without hand fatigue.

Multipurpose Use: Suitable for medical exams, industrial work, food handling, beauty, and more.

These gloves combine sleek appearance with reliable performance perfect for professionals who need both style and safety.

New Enhanced Dual Cartridge Design

The Hydra Pen H6 features an innovative, removable cartridge and integrated serum cup designed for enhanced performance and precise serum application. Its unique cartridge integrates a smart chip that seamlessly synchronizes with the device, allowing you to easily control serum flow and prevent reverse flow.

3-Stage Serum Type Adjustment System

You can customize the flow to suit different serum thicknesses, achieving optimal absorption and results. This advanced feature is accessible via a dedicated control knob, making the Hydra Pen H6 a versatile tool for all skin types and professional applications.

Automatic Needle Depth Adjustment

Thanks to its new automatic needle depth adjustment feature, the Hydra Pen H6 allows you to effortlessly adjust the needle length from 0 mm to 2.0 mm with the press of a dedicated button. This advanced function provides precise, real-time adjustments for different skin types and treatment areas, delivering optimal results for microneedling sessions.

Built-in Red LED Light Therapy (630nm) and Blue LED Light Therapy (470nm)

Enhance your treatment results with built-in red and blue LED light therapy. Red light supports healing and collagen production, while blue light helps reduce redness and irritation, providing comprehensive anti-aging skincare in one device.

Large, Full-Color LED Display

The Hydra Pen H6 offers clear visibility with its full-color LED display. This feature provides real-time information on speed, depth, serum flow, and battery indicator, making it easier to adjust your settings and achieve professional-level results.

Product Code Product Description

PRS-CMA0050 Automatic Vicat Apparatus

STANDARDS : EN 196-3:2005; EN 13279-2 (GYPSUM);EN 480-2 /ASTM C187, ASTM C191

The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and final setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements up to 50 tests.

Plunger for initial consistency Thermostatic baths (optional)

GLCD display for data input and diagram/test report.Printer for final test report and diagram

RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards.

Power supply 220 V, 50 Hz, single phase.

Weight 40 kg.

If you want to give your make-up a new and original touch, you should use Derma Make-Up Cover Foundation. Also recommended by dermatologists, it provides a silky and flawless appearance to your skin and changes the habit of make-up. With 6 different shades, you can choose the best for your skin and use it in every make-up. On special days and nights, Derma Make-Up Cover Foundation protects your skin with SPF 15 sun protection. The product has high concealment properties and provides a perfect appearance for the skin. With its resistance to water, it lasts for up to 24 hours, so you do not lose anything of your beauty during the day. Derma Make-Up Cover Foundation eliminates wrinkles and crowâ??s foot appearance, creating a porcelain effect on the skin. Thanks to its yellow and pink sub-tones, it adapts to any skin colour and helps the skin to regain its natural appearance. You can use the Derma Make-Up Cover Foundation not only in your face, but also in other parts of your body. You can also hide your tattoos with a single touch.

The Faber Castell ballpoint pen transfers special ink from the small hole in the tiny tube to the surface with the help of a tiny ball at the end of the hole. It is a modern writing tool that is often used all over life.

- Needle tip thickness writing 0.7 mm
- Comfortable and smooth writing
- High quality ink, seamless line
- Ergonomic grip
- Nickel-Silver tip / Tungsten Carbide ball
- Ventilated cap
- 10 different colors: Pink, lilac, turquoise, light green, green, burgundy, red, blue, black.

Product Code Product Description

PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer 220-240 V 50-60 Hz

PRS-AS0120/110 Semi-Automatic Digital Bitumen Penetrometer 110 V 60 Hz

PRS-AS0121 Transfer Dish for PRS-AS0120

PRS-AS0122 Sample Cup, Ã? 55x35 mm, stainless steel

PRS-AS0123 Sample Cup, Ã? 70x45 mm, stainless steel

PRS-AS0124 Penetration Needle, 2,5 g

PRS-AS0160 One-Quarter Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0161 One-Half Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0162 Penetrometer Cone ASTM D 217 (Optional Type) and ASTM D 937, for PRS-AS0120 and PRS-AS0126, Brass

PRS-AS0165 Resilience Ball Penetration Tool. ASTM D5329, for PRS-AS0120 and PRS-AS0126

STANDARDS : EN 1426; ASTM D5; AASHTO T49
The PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature. The Penetrometer consists of a cast iron base with coarse and fine levelling screws, a digital penetration measurement gauge 0.01 mm readability and a penetration timer unit.
Start button of the penetration timer unit is used to release the plunger fitted with the needle to start the 5 seconds test.
A water bath (PRSGE-AS4000 or PRSGE-AS4050, 25±0,1 C) and a thermometer ( IP38, ASTM 17C or 63C ) required for the test should be ordered separately.


The Semi-Automatic Digital Bitumen Penetrometer is supplied complete with;
â?¢ Penetration Needle, 2,5g, 1 pieces
â?¢ Transfer Dish
â?¢ Sample Cup Ã? 55x35 mm, 3 pieces, stainless steel
Dimensions 200x300x500 mm
Weight (approx.) 16 kg

PRS-ZE0180 : Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz

PRS-ZE0180/110 : Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz

PRS-ZE0182 : Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel

PRS-ZE0183 : Cone Test Gauge for PRS-ZE0182

PRS-ZE0184 : Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel

PRS-ZE0185 : Cone Test Gauge for PRS-ZE0184

PRSGH-1425 : Moisture Content Tin with Lid Ã?:55 mm x h:35 mm, Aluminum

PRSGH-1435 : Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum

A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength.
The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit.

The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test.

Semi-Automatic Penetrometer for Liquid Limit supplied complete with;
Automatic Penetration Timer Unit,
30° Penetration Cone
Sample Cups, 3 pcs. Aluminium, Ã?55 mm x h:35 mm.

Spinal Needles:
-Pencil Point
-Quincke Point
-Atrau-com type

Various Types

18G-29G
40CM-120CM
With or without gude needle.

For the send of product detail and pictures please contact with my email address please dont hesitate to ask of product detail.
Best regards
Baris parabas

Cuantity in box : 100
Box in cartoon : 20
Cartoon prÝce : 23, 40$
Cartoon sÝzes : 220x480x280
Box m3 : 0, 03
Box(kg) weight : 10, 3

FELIS Single Needle Frame Type Mattress Quilting Machine
FELIS is a frame by frame single needle computerized quilting machine. It has a moving sewing head and moving frame in order to accelerate the movements by reducing the weight of moving parts.
With the advantage of the moving sewing head, FELIS also brings 50% space requirement advantage compared to conventional frame by frame quilting machines. It needs half the space of a conventional fixed head quilter.
With the ability of quilting very different products, FELIS offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill.


Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
High operator security systems
Automatic frame measure control system
Remote & Smartphone production monitoring system
Easy pattern adaptation
Flexible and user friendly software : EtQuilt

TIGON Single Needle Continuous Mattress Quilting Machine
TIGON is a full automatic feeding system high speed single needle quilting machine for high end luxury mattress, home textile and upholstery works. TIGON performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length.
With the ability of quilting very different products, TIGON offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill.
Your mattresses, headboards, comforters will overtop among others with the aspects of stitch quality, pattern designs, sustaining quality as well as your efficiency.

Full automatic feeding, tensioning, quilting and cutting
Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
Standard length & sides cutters
High human security systems
Brushless servo motors
Automatic fabric measure control system with great accuracy
Remote & Smartphone production monitoring system
Electronic position controlled fabric width adjustment
Easy pattern adaptation
Flexible and user friendly software : EtQuilt.
High quality sewing head: Durkopp Adler
Max. Sewing speed: 3400 RPM // 21 m/min (according to the material filling)
Max. Jumping Speed: 60 m/min
Max. Stitch area: 2.20 x 2.60
Max. Fabric width: 2.45 m
Suggested needle size: 120-160 (material dependent)
Number of feeding rolls: 5 (options are available upon request)
Stitch length: 1-10 mm (may change according to the material filling)
Automatic upper and lower thread cutting system
Max. Thickness: 9-10cm (material compressibility dependent)
Stitch type: Lock-stitch
Automatic integrated panel cutter in length
Advanced Side Cutters
Automatic lubrication for the sewing head as hook and needle part
Statistical production graphics
Immediate error solving with visual error display
Online consultation with ElektroCARE system
Reliable OMRON controllers
Optical barriers for human safety
Durable FESTO pneumatic system with low air consumption
No need for repair machine thanks to ability to start from the desired point.
No need to draw again for scaling, rotating and arraying
Motorized width adjustment of the clamps for different fabric width
Automatic measuring of the physical maximum area of sewing to double check with the active pattern design
Pattern Design Preparing Software is Included.

It is a product designed to help count needles and scalpels used in surgical operations in the operating room and to ensure safe control of waste. One side is manufactured as strofor and the other side as magnet. Sterile and nonsteril packaging is available. It's disposable.

Leon-3d is the multineedle 3d border machine. It is used to add decorative secondary materials such as ribbons, 3d spacer, zippers. With the functional folder, it offers various types of border combinations.

The heavy duty servo motor driven puller system eliminates the slipping fully and provides excellent stitch quality not only for single piece pre-quilted borders, but also while joining multiple layers of fabric, foam, polyester fiber, ribbons, nonwoven, etc.

Various optional folders for special borders
Ability to make handle with optional folder
Servo driven puller cylinders
Ability to sew zippers, 3d spacer and ribbons
Ability to feed pre-quilted border or separate layers of border

LEON-L - Single Needle Lock Stitch Border Vertical Stitch Machine
High quality reliable lock stitch PFAFF 335 sewing head - Lock-stitch or Chain-stitch sewing head Threar break detection sensors Low amount of material warning system Unlimited number of linear pattern storage and creation NC axis control system Automatic needle up positioning Ergonomic design for thread recovery No operator requirement with auto stop-alert system Touchscreen Control Panel Full automatic process with PLC Max. Sewing speed: 2300 rpm Max. Sewing width: 26.5 cm (10.5 inches) Max. Stitch length: 6 mm Capacity of pattern numbers: 400 pcs Auto border roller Auto stop at preset yardage Smooth operation with PLC control Custom pattern programming with touchscreen Ability to sew limitless 180° linear patterns Weight: 500 kg Power requirement: 2.5 kW

LEON-CS is a high speed double chain-stitch border quilting machine with self lubricating sewing head. With its advanced control system it offers not only vertical stitching but also any 180° linear patterns. You are able to create your own designs by using the touchscreen and save up to 400 different patterns. LEON-CS offers great alternatives to multi needle quilters.

LEON-CS is now available with 40 cm (16 inches), 50 cm (20 inches), 60 cm (24 inches) sewing width.
Ability to work with other border machines
Touchscreen controller
Custom pattern programming with touchscreen
Robust, high speed chainstitch sewing head with automatic lubrication

Dialyzer Bloodline Arter Ven Set Fistula Needle

1ml,2ml,3ml,5ml,10ml,20ml with different size needles 21G, 22G, 23G, 24G, 25G, 26G, 27G .
Material: medical grade high transparent PP
Central nozzle, Luer lock tip, luer slip
Product structure: barrel, plunger, piston and hypodermic needle
Sterilized by EO gas, non-toxic, non-pyrogenic , single use only
Piston: latex / latex free

Printed carton box

Self Tapping

The screw threads are designed to provide maximum retention in the cortical bone.

Needle and needleless options.

Special design handle for suture and needle reserve

Ergonomic handle design
REF PRODUCT DESCRIPTION
16.150.012 2.0mm suture anchor TI without needle
16.150.013 2.8mm suture anchor TI without needle
16.150.014 3.5mm suture anchor TI without needle
16.150.015 3.5mm suture anchor TI with needle
16.150.016 5.0mm suture anchor TI with needle
16.150.017 5.0mm suture anchor TI without needle

Cleanroom clogs, Autoclavable, Antistatic, Antimicrobial
Two Types: Jasmine-Unitem
Can be used at operating theatres and any controlled enviroment
Sizes: 35-46
Various Colors

Platelet Rich Plasma System - ClassIII

- 2 PIECES 10 ML PRP TUBES (SODIUM CITRATE) 16 mm x 10 cm
- 1 PIECE RESUSPENSION TUBE 16 mm x 10 cm
- 1 PIECE VACUTAINER BUTTERFLY GREEN NEEDLE TIP
- 1 PIECE HOLDER
- 2 PIECES 21 G GREEN NEEDLE TIPS
- 1 PIECE 30 W x 13 mm YELLOW NEEDLE TIP
- 1 PIECE 5 CC INJECTOR
- 3 PIECES 2,5 CC INJECTOR
- 1 PIECE 18 G x 9cm PRP COLLECTOR NEEDLE

2 Pieces of 10ml Sodium Citrate (1 ml) ALINBIOTECH PRP Tube
1 Pc Holder
1 Blood Collection Needle - 21G
1 pc 18G 90mm Spinal Needle
2 pcs Luer Lock Injector - 5ml
2 pcs Luer Lock Injector - 2ml
1 pc 30G 13mm practice needle

1ml, 2ml, 2,5 ml, 3ml ,5 ml , 10ml Syringes With Needles

Shaped perforating tubes (round body), needles.
Standard and smooth prickers.

Platelet Rich Plasma System - ClassIII

- 10 ML SODIUM CITRATE PRP TUBE
- (PREFERRED INJECTOR NEEDLE TIPS WILL BE GIFT.)

1 ball of Yarn is 650- 800 gram

7 to 9 number of croche needle required