Find Verified Recruitment Management Software Suppliers, Manufacturers and Wholesalers

Adjustable backrest and seat. Chromium plated base with wheels. Foam with 32 dansity. Ergonomic design.

30mm melamine faced chipboard table top with leather writing pad, 30mm Gofrato painted MDF under top, Aluminium supported legs.

Treat your hair to deep nourishment and shine with our Argan Oil Herbal Shampoo. Rich in essential fatty acids and vitamin E, this luxurious formula deeply moisturizes dry or damaged hair, making it soft, manageable, and resilient.
Known as â??liquid gold,â?? argan oil helps repair split ends, restore smoothness, and protect hair from environmental stress. With its subtly sweet and nutty aroma, each wash is a calming, spa-like experience. Free from parabens and sulfates, this shampoo is ideal for daily care and safe for color-treated or chemically processed hair.

Product Technical Specifications Usage Areas

Apex APX 1KM Smart Inverter 12V 60A MPPT
Nominal Output Power 1000 Watt
Villa


Output Waveform
Pure Sine Wave
Detached House


Output Voltage
230V
Container


Output Frequency
50Hz-60Hz
Tiny House


Efficiency
99%
Bungalow


DC Input Voltage
12V DC
Office and Businesses


MPPT
60A
Commercial Enterprises


Rated Power
1000 Watt
Milk Milking Units


Maximum PV Input
800 W / 50V DC
Beekeepers


Operating Temperature
0- 40 Degrees



Noise Level
45dB



Warranty
2 Years

What is a Smart Inverter?
A smart inverter goes beyond traditional inverter functions; it features two-way communication with the grid, remote monitoring/configuration, energy optimization, load management, and advanced protection capabilities.

Traditional inverter: Only converts DC to AC.

Smart inverter: In addition to conversion, it provides greater control and data over grid and/or battery management through advanced software and hardware integration.

Especially preferred in renewable energy installations (solar, wind), grid-tied (on-grid), or hybrid systems to increase energy efficiency and reliability.

What Does It Do?
Two-Way Communication and Control

Interacts smartly with the grid: monitors grid voltage, frequency, and power demands, adjusts reactive power when necessary.

Remote access allows viewing, updating, and managing operating parameters without being on-site.
Energy Management and Optimization

Automatically manages battery charge/discharge for optimal efficiency.

Real-time system optimization based on production-consumption balance,

Advanced Protection and Fault Diagnosis

Ensures safe shutdown during sudden grid failures or fluctuations (e.g., anti-islanding).

Sends automatic alerts and records data during faults.

Remote Monitoring and Reporting

Provides real-time production, consumption, charge-discharge, temperature, etc. data via mobile app or web interface.


Reports allow long-term performance evaluation.

How Does It Work?
Input Stage (DC or Grid)

Can accept DC input from solar panels or wind turbines.


Designed also to manage energy coming from the grid (AC).

Energy Conversion and Monitoring

Converts DC power to AC while simultaneously performing real-time measurements with built-in sensors and software algorithms.

Monitors grid parameters (voltage, frequency), panel/battery voltage, temperature, etc., to find the optimal operating point.
Battery Management (In Hybrid Models)

Communicates with the Battery Management System (BMS) if a battery bank is present

Adjusts charge/discharge strategy based on instantaneous consumption, grid constraints, energy tariffs, or weather forecasts.
Communication Interfaces

Uses protocols like RS485, Wi-Fi, Ethernet, ZigBee to record, monitor, or control inverter data.


Grid operators or users can remotely access the inverter for updates or setting changes.

Grid Interaction

Real-Time Power Adjustment: Balances power fed to or drawn from the gr

LED handrail and balustrade lighting system based on the LBS 8005 profile. Aluminium or stainless steel handrail with a concealed LED channel and diffuser, giving continuous illumination of stairs, ramps, terraces and bridges. IP65 rated for outdoor use, available in 3000K and 4000K. Custom lengths, bends, junctions and end caps produced to project drawings; supplied with drivers and mounting brackets. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Product Specifications:
Fluid Balance Accuracy
High Safety Aspects in terms of Fluid Exchanges
High Hemodynamic Stability Response for Total Fluid Management, thus preventing hypovolemia (excessive fluid loss) and hypervolemia (excessive fluid gain)
The Diapact System has one of the most efficient fluid warmers due to the design of the plates 20 to 39�°C


Benefits of Diapact�® CRRT:
Freedom to move within all therapies at any time
Options to do pre/post-dilution
Unsurpassed fluid exchange accuracy due to only one load cell
The load cell can accommodate up to 251 (5 bags)
Integrated Fluid Heater (20 to 39�°C)
Heparin pump (perfusion) linked to the software RS 232 with data connect log (DCI)
Nurse call option integrated Full flexibility in terms of Acute

Designer wall light with a natural onyx marble shade and hand-finished brass plating, 30 cm diameter. Each piece is unique in veining. Supplied with E27 lamp holder or integrated LED module on request. Manufactured to order in Turkiye with a lead time of 25-30 calendar days for 100 pieces and approximately 110 calendar days for 1000 pieces. Custom marble type, metal finish and diameter available for hotel and residential projects. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Classic decorative road and street lighting luminaire from the LBS 6500 series. Cast aluminium body with hot-dip galvanised and electrostatic powder-coated finish, UV-stable polycarbonate or tempered-glass diffuser, IP65 protection. LED module with surge protection, available in 3000K and 4000K, with optional photocell and dimming control. Post-top and side-entry mounting options; wattage configured to the project lighting calculation. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Adjustable recessed LED spot from the Velar R series, with tilt and rotation for accent and wall-wash applications. Aluminium injection body and heatsink, anti-glare reflector, electrostatic powder-coated finish. Osram LED modules with Tridonic or Eaglerise drivers, available as Velar-R5, R6 and R8 in 3000K, 4000K and 5000K with a choice of beam angles. Dimming via phase-cut, 1-10 V or DALI. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Recessed LED downlight from the Dome series, with a deep-set dome optic that reduces direct glare. Aluminium injection body and heatsink, electrostatic powder-coated finish, opal or microprismatic diffuser. Osram LED modules with Tridonic or Eaglerise drivers, IP44 rated for bathrooms and wet rooms, available in Dome 2, 3, 5, 6 and 8 sizes and in 3000K, 4000K and 5000K. Dimming via phase-cut, 1-10 V or DALI. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Slim surface and suspended architectural linear LED luminaire in the Linje 50 to 75 range. Extruded aluminium body with integral heatsink, opal or microprismatic low-glare optics and electrostatic powder-coated finish. Osram LED modules with Tridonic drivers, dimmable via phase-cut, 1-10 V or DALI, in 3000K, 4000K and 5000K. Continuous run capability; custom lengths and any RAL finish produced to project drawings. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Product Description :
KIVKR101020P

Price of product ( USD price or FOB price) :
Full Sytem 80.000$

Product origin :
Turkey - Istanbul

Key Specifications/Special Features :
Year : 2020 Machine Frame: Aliminium 6082 series Production Capacity: 125 pcs / minutes non stop. 23 hour non stop working 4 pieces side controlling system. For this system raw material changing is much more easier and re-starting is shorter than the old ones. Ultrasonic: 2x20 khz/2000w Breaking: Mechanical . Sensor can be attached. Motors made in South Korea 220V 50Hz Screen / Software L/S 7 LS - Data can be stored in automation screen and manageable LS - Automation Total Consumption: 3kw

Minimum Order Size and Packaging details :
Raw matarial unit: 135cm x 150cm x 55cm Mask Machine: 200cm x 70cm x 80cm

Catenary lighting pole system from the LBS 6000 series, used to suspend luminaires across streets, squares and pedestrian zones. Steel body hot-dip galvanised to EN ISO 1461 and electrostatic powder-coated in any RAL colour, designed to the EN 40 pole standard. Heights, arm geometry and cable tensioning hardware are configured to the project; anchor cage and base plate supplied. Static calculation and shop drawings issued with the quotation. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The 2026 interactive flipbook catalogues are online at medra-kataloglar.netlify.app. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, configuration, RAL finish and destination.

Trimless recessed LED downlight from the Fama series, installed with a plaster-in frame for a completely frameless ceiling finish. Aluminium injection body and heatsink, deep anti-glare optic, electrostatic powder-coated inner finish in white, black or champagne. Osram LED modules with Tridonic or Eaglerise drivers, fixed and adjustable versions, available as Fama 1, 4, 8 and J in 3000K, 4000K and 5000K. Dimming via phase-cut, 1-10 V or DALI. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Suspended architectural linear LED luminaire in the Ligero 50 to 80 range. Extruded aluminium body with integral heatsink, direct or direct-indirect (up-down) light distribution and low-glare microprismatic or opal optics. Osram LED modules with Tridonic drivers, dimmable via phase-cut, 1-10 V or DALI, in 3000K, 4000K and 5000K with CRI above 80 or above 85. Continuous run capability with mechanical and electrical joints; custom lengths and any RAL finish produced to project drawings. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Recessed linear LED profile with a visible frame, supplied in the Luce 50, 55 and 60 aperture sizes. Aluminium extrusion body with integral heatsink, opal PMMA or microprismatic diffuser, electrostatic powder-coated finish in standard white, black or any RAL colour. Osram LED modules with Tridonic or Eaglerise drivers, dimmable via phase-cut, 1-10 V or DALI, in 3000K, 4000K and 5000K. Surface, recessed and suspended mounting kits available. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Includes special software for preparing CGF plasma.

Enables PRP preparation with PRP module

Sterile indoor environment and high platelet activation with UV / Led irradiation system

4 tube capacity and opening rotor.

CE certified and UTS / UBB registered

Recessed trimless linear LED profile for plastered ceilings, offices, retail and hospitality interiors. Aluminium extrusion body with integral heatsink, opal PMMA or microprismatic 3D diffuser, electrostatic powder-coated finish. Osram LED modules with Tridonic or Eaglerise drivers, dimmable via phase-cut, 1-10 V or DALI. Available across the Solas 50 to Solas 85 aperture range in 3000K, 4000K and 5000K, CRI above 80 or above 85. Continuous runs with corner, cross and T-joints; custom lengths produced to project drawings. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.

Recessed LED downlight from the Agenor series. Aluminium injection body and heatsink, electrostatic powder-coated finish, diffuser in opal polystyrene, fire-proof opal PMMA or microprismatic 3D. Osram Pro LED 6 W at 350 mA delivering 540 / 570 / 600 lm at 3000K / 4000K / 5000K with CRI above 85; Osram Eco 6 W delivering 405 / 428 / 450 lm with CRI above 80; Osram Pro PVR 9 W at 500 mA delivering 760 / 790 / 810 lm. Tridonic or Eaglerise drivers, protection IP20 or IP44, cut-out from 85 mm, dimming via phase-cut, 1-10 V or DALI. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings, cut-out details and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, wattage, CCT, optic, RAL finish and destination.