Find Verified Soil Testing Surveying Instruments Suppliers, Manufacturers and Wholesalers

Armchair

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

Product Code Product Description

PRS-ZE0620 Automatic Soil Compactor, 220-240 V 50 Hz (60 Hz version is available upon request)

PRS-ZE0620/110 Automatic Soil Compactor, 110 V 60 Hz

PRS-ZE0622 ASTM/EN/BS Rammer for PRS-ZE0620

PRS-ZE0624 ASTM Rammer Face Ã? 50.8 mm for PRS-ZE0620

PRS-ZE0625 EN/BS Rammer Face Ã? 50 mm for PRS-ZE0620

STANDARDS : ASTM D558, D559, D560, D698, D1557, D1883; EN 13286 2, 13286-47; BS 1377:4 AASHTO T99, T134, T135, T136, T180, T193; NLT 107/98, 108/91, 111/87

PRS-ZE0620 Automatic Soil Compactor is designed to compact specimens automatically and uniformly, assuring conformity with the above listed international standards.

The principle of the design is to allow the hammer to drop the required height into the soil in the mould which rotates circularly to distribute the blows uniformly over the surface of the specimen in the mould. The drop height is adjustable to 300 mm, 305 mm, 450 mm and 457 mm.

The rammer is circular faced and interchangeable to 50 mm or 50.8 mm diameter. Rammer weight is adjustable to 2.5 kg or 4.5 kg according to reference standard. When compacting 100 mm diameter specimens the unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates on iner and outer radius to obtain even compaction.

The number of blows per layer can be set at the beginning of the compaction process by the digital counter according to the standard preferred by user. This automatic blow pattern ensures effective and equal compaction for each layer of soil by rotating the base table, so the mould, in equal steps and travelling the rammer across the mould. User defined blow number and in-out distribution is also available.

Compactor is equipped with programmable digital counter which allows the machine;
â?¢ To select reference standard ( number of blows and mould size ) by the operator at the beginning of the test.

â?¢ To set desired compaction cycle ( number of blows and count of the number of inner and outer drops) by user.

Rammers

EN / BS Circular faced, 50 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

ASTM Circular faces, 50.8 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

Drop Height

BS Adjustable to 300 mm or 450 mm

ASTM / AASHTO / EN Adjustable to 305 mm or 457 mm

The Automatic Soil Compactor is supplied complete with;
â?¢ ASTM/EN/BS Rammer
â?¢ ASTM Rammer Face, Ã? 50.8 mm.
â?¢ EN/BS Rammer Face, Ã? 50 mm.

Dimensions 650x550x1550 mm

Weight (approx.) 150 kg

Power 370 W

Product Code Product Description

PRS-ZE0160 Soil Lathe / Trimmer and Extruder

PRS-ZE0162 Open Wire Saw

PRS-ZE0164 Wire Saw

PRS-ZE0166 Trimming Knife

PRSGG-2205 Porcelain Mortar with Pestle 130 mm dia

PRSGG-2215 Rubber Headed Pestle

The PRS-ZE0160 Soil Lathe, Trimmer and Extruder is used to extrude and trim soil samples from 35 mm to 100 mm diameter to reduce samples. It should be used together with PRS-ZE0162 Open Wire Saw.

Open Wire Saw, Wire Saw, Trimming Knife, Porcelain Mortar with Pestle. The Rubber Headed Pestle can be ordered separately.

Technical Specifications

Specimen Lathe 35x70 mm to 100x200 mm

SpecimenTrimming and Extrusion 35x70 mm to 50x100 mm

Vertical Daylight 260 mm

Dimensions 220x300x450 mm

Weight (approx.) 15 kg

Testing Sieves

STANDARDS : EN 933-2; ISO 565, 3310-1, 3310-2; ASTM E11, 323

PARSROS offers a wide range of High Quality Testing Sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. PARSROS testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction.

Woven Wire Cloth and Perforated Plate Sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards. Wet Washing Sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Available in 200 mm diameter with 100 mm and 200 mm deep models.

All parts of testing sieves are manufactured from stainless steel. Receiving Pans and Lids are available in stainless steel with 200 mm and 300 mm diameters.

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Product Code Product Description

PRS-CM0050/A Vicat Test Set EN

PRS-CM0050/E Vicat Test Set ASTM

PRS-CM0051 Vicat Apparatus (Frame)

PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm

PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm

PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia.

PRS-CM0053/A Vicat Needle ASTM 1 mm dia.

PRS-CM0054 Final Vicat Needle EN 1.13 mm dia.

PRS-CM0055 Consistency Plunger 10 mm dia.

PRS-CM0056 Supporting Glass Plate

PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050

PRSGT-1305 Glass Thermometer Max. 110°C

PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2

STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131
The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method.
PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water.
The Vicat Test Set is supplied complete with;
Vicat Mould
Initial and final Needles (for EN )
Vicat Needle (for ASTM)
Consistency Plunger
Supporting Plate
Glass Thermometer
Transfer Dish (for EN)

Dimensions 150x190x318 mm
Weight (approx.) 3 kg

Product Code Product Description

PRS-ZE1500 Pinhole Test Apparatus

PRS-ZE1502 PVC Tubing Ã? 10x8 mm 10 m Coil

STANDARDS : BS 1377:5; ASTM D4647

Water flowing through fine-grained soils with high sodium content makes them highly erodible.
The PRS-ZE1500 Pinhole Test Apparatus is used for evaluating the erodibility of clay soils by flowing water through a small hole that is drilled through the compacted specimen.
The apparatus consists of a cylindrical metal container fitted one end with a water inlet and the other end with an outlet connection, a standpipe tube with scale and a stand to support the apparatus.

Dimensions 150x200x1200 mm
Weight (approx.) 3.5 kg

Sieve Test Set

PRS-B0518 Sleve Segregation Test Set

PRSG-4PC0050/Y Sieve Ã? 300x75 mm 5 mm Square Aperture

PRSG-4002/Y Pan Ã? 300x75 mm

STANDARDS : EN 12350-11
The PRS-B0518 Sieve Segregation Test Set is used for determining the resistance to sieve segregation of Self Compacting Concrete. The Sieve has 5 mm square apertures with a frame diameter of 300 mm conforming to ISO 3310-2 standard. Supplied complete with a Pan.

Dimensions 350x350x250 mm

Weight (approx.) 2,5 kg

Slump Test Set

Product Code Product Description

PRS-B0400 Slump Test Set

PRS-B0402 Slump Cone

PRS-B0404 Slump Base Plate 500x500x60 mm with Handle

PRS-B0406 Slump Funnel, Galvanized Steel

PRS-B0408 Tamping Rod Ã? 16x600 mm

PRS-B0410 Tamping Rod Ã? 10x300 mm

PRSGH-1695 Rubber Mallet

PRSGM-0380 Steel Ruler 300x1 mm
PRSGH-1605 Round Scoop, Medium

STANDARDS : EN 12350-2

The Slump test method is used for the determination of the consistency and workability of fresh concrete. The PRS-B0400 Slump Test Set is supplied either galvanized or paint coated to prevent corrosion.

The Slump Test Set are supplied complete with;

� Slump Cone Top Dia: 100 ±2 mm / Base Dia: 200 ±2 mm / Height: 300 ±2 mm
â?¢ Slump Base Plate 500x500x60 mm with Handle
â?¢ Slump Funnel, Galvanized Steel
â?¢ Tamping Rod Ã? 16x600 mm
â?¢ Rubber Mallet
â?¢ Steel Ruler 300x1 mm

Dimensions 550x600x250 mm (packed)

Weight (approx.) 6 kg

Product Code Product Description

PRS-ZE0270 Hydrometer Test Set

PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz

PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz

PRS-ZE0274 Hydrometer 151H

PRS-ZE0275 Hydrometer 152H

PRS-ZE0276 Hydrometer Jars, 1000 ml

PRSGC-0900 Sodium Hexametaphosphate, 1kg

STANDARDS : ASTM D422; AASHTO T88

Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay.
The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption
The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity.

152H Hydrometer should be ordered separately.

The Hydrometer Test Set is supplied complete with;
Dispersion mixer
Hydrometer bath
Hydrometer, 151H, 1pcs.
Sodium hexametaphosphate 1 kg,
Sedimentation cylinder, 1000 ml, 6 pcs.
Heater,
Circulation unit
Rubber stopper for sedimentation cylinder
Beaker, 600 cc

151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division

152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division

Dimensions 330x630x450 mm

Weight (approx.) 20 kg

Product Description - SARS-CoV-2 Antigen Rapid Test Kit is an in vitro diagnostic rapid test for the qualitative detection of SARS-CoV-2 antigen (Ag) in human nasopharyngeal swab specimens from individuals who meet Covid-19 clinical criteria.
Product origin - Turkey / Istanbul

Key Specifications/Special Features - vitro diagnostic , Rapid Antigen Test Kit, SARS-CoV-2, Covid 19

Minimum Order Size and Packaging details - 500

Softec Pregnancy Rapid Test kits

PRS-EU8050 " Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 " Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Product Code : Product Description

PRS-ZE0865 : In-situ CBR Test Apparatus

PRS-ZE0866 : Cutting Collar (edge) for PRS-ZE0865

PRS-ZE0867 : Conversion Frame

STANDARDS :

The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction.

The set consists of:
50 kN capacity mechanical jack with ball seating
50 kN capacity load ring
Analog penetration dial gauge (30 mm travel x 0.01 mm)
Adjustable dial gauge holder
CBR Penetration piston
Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length)
Datum bar assembly with two stands
4.5 kg annular surcharge weight
4.5 Kg slotted surcharge weight
9 kg slotted surcharge weight
Vehicle bracket and wooden carrying case

The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine.

The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.

PRSM-4000 : Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 : Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 : Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 : Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 : Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 : Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

Product Code : Product Description

PRS-ZE0860 : Automatic CBR Test Machine, 220-240 V 50-60 Hz

PRS-ZE0860/110 : Automatic Digital CBR Test Machine, 110 V 60 Hz

The PRS-ZE0860 Automatic CBR Test Machine is designed for performing laboratory evaluation of the CBR value of highway sub-bases and sub-grade, and determination of the strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?).

The PRS-ZE0860 is composed of a robust and compact two column frame with adjustable upper crossbeam driven by an electromechanical ram with a maximum capacity of 50 kN and a data acquisition and processing system.

The PRS-ZE0860 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The ram speed can be set between 0.5 mm/min to 5 mm/min by using the Digital Readout Unit. This main feature allows the user to perform tests complying to BS, EN, ASTM or AASHTO standards with the same machine.

Rapid adjustment of the platen is also provided by up and down buttons which are located on the front panel of the machine. The PRS-ZE0860 is supplied complete with a 50 kN load cell, penetration piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and connection cable. PC is optional.

The CBR Test Machine is supplied complete with;
Load Cell, 50 kN
Penetration Piston
Linear Potentiometric Displacement Transducer with Connection Part, 25x0.001 mm
Computer Software
Connection Cable

Product Code Product Description

PRS-ZE0080 Field Inspection Testing Kit

PRS-ZE0082 Field Inspection Pocket Vane Tester

PRS-ZE0082/1 Extension Rod for PRS-ZE0082

PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

STANDARDS : ASTM D2573

The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case.

PRS-ZE0080 Field Inspection Testing Kit

Dimensions (packed) 240x210x50 mm

Weigth (approx.) 1.8 kg

The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately.

PRS-ZE0082 Field Inspections Pocket Vane Tester

Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm

Measuring Range 0 to 240 kPa (0-24 N/cm')

Torque Value 5 N - m

Extension Rod 500 mm depth.

Overall Dimensions (assembled) 310x105 mm

Weight 1.3 kg

The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case.

PRS-ZE0084 Heavy Duty Pocket Penetrometer

Measuring Range 0 to 10 kgf/cm'

Dimensions (assembled) 210 mm length x 20 mm dia.

Weight (approx.) 0.5 kg

Product Code Product Description

PRS-AS0013 Reflux Extraction Test Set 1000 g, 220-240 V 50-60 Hz

PRS-AS0014 Reflux Extractor Jar 1000 g

PRS-AS0015 Reflux Extractor Condenser 1000 g

PRS-AS0016 Reflux Extractor Conical Wire Screen 500 g

PRSGH-1830 Iron Wire Gauze 120x120mm

PRS-AS0020 Reflux Extraction Test Set 4000 g, 220-240 V 50-60 Hz

PRS-AS0021 Reflux Extractor Jar 4000 g

PRS-AS0022 Reflux Extractor Condenser 4000 g

PRS-AS0023 Reflux Extractor Conical Wire Screen 2000 g

PRS-AS0024 Filter Paper Ã? 400 mm (50 pcs./pack) for PRS-AS0013 and PRS-AS0020

PRSGH-1835 Iron Wire Gauze 160x160mm

STANDARDS : ASTM D2172; AASHTO T164 B

The Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples. The bitumen content is calculated by difference from the weight of extracted aggregates, moisture content and ash from an aliquot part of the extract.

The Reflux Extraction Test Set is supplied complete with;
Cylindrical Glass Extractor Jar
Two Wire Mesh Cones with Interlocking Frames
Water Condenser with Inlet/Outlet Tubes
Filter Paper, 50 pcs./pack
Hot Plate
Iron Wire Gauze (PRSGH-1830 with PRS-AS0013 , PRSGH-1835 with PRS-AS0020)

Dimensions

PRS-AS0013 260x260x620 mm

PRS-AS0020 260x260x620 mm

Weight (approx.)

PRS-AS0013 6 kg

PRS-AS0020 8 kg

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

Product Code Product Description

PRS-ZE0950 Sand Cone Set 6.5"

PRS-ZE0960 Sand Cone Set 12"

PRS-ZE0952 Plastic Sand Jar 5 L, for PRS-ZE0950

PRS-ZE0962 Density Cylinder, 12"

STANDARDS : ASTM D1556; AASHTO T181, T191

The PRS-ZE0950 and PRS-ZE0960 Sand Cone Sets are used for the determination of the degree of compaction on site. PRS-ZE0950 includes double cone, plastic sand jar and metal tray with flanged hole.

PRS-ZE0962 Density Cylinder is used for determining in place density of compacted base courses containing large sizes of coarse aggregates.

Product Code Dimensions Weight (approx.)
PRS-ZE0950 300x300x550 mm 4 kg
PRS-ZE0960 600x600x650 mm 15 kg
PRS-ZE0962 470x320x260 mm 10 kg

Product Code Product Description

PRS-ZE0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-ZE0750 CBR Type Mould BS (modified proctor) Vibrating Hammer Mould EN

PRS-ZE0768 C Spanner for PRS-ZE0750, 2 pcs

PRS-ZE0770 Assembly Tool for Base Plate for PRS-ZE0750

STANDARDS: EN 13286-4; BS 1377:4 / EN 12697-9, 12697-10, 12697-32

The PRS-ZE0750 Vibratory Compactor Set is used to prepare the test specimens of road base and sub base materials by using the vibratory compaction technique. The specimens prepared from road base and sub base materials is used for the proctor and CBR tests.

The set is also used for preparing the test specimens of bituminous mixtures
PRS-ZE0750 mould with base plate and extension collar should be ordered separately and also when ordering PRS-ZE0750, PRS-ZE0768 and PRS-ZE0770 should be ordered separately for assembling and dissambling.

The Vibratory Compactor Set is supplied complete with;

Vibrating Hammer
Supporting Frame
Small Tamping Foot, 102 mm dia.
Large Tamping Foot, 146 mm dia.
Shank, 300 mm

Dimensions 510x300x1120 mm

Weight (approx.) 75 kg (complete set)

Power 1150 W (vibrating hammer)

Product Code Product Description

PRS-ZE0900 Sand Replacement Test Set 100 mm BS

PRS-ZE0901 Sand Pouring Cylinder 100 mm dia. for PRS-ZE0900

PRS-ZE0902 Calibration Container for PRS-ZE0900

PRS-ZE0903 Metal Tray for PRS-ZE0900

PRS-ZE0910 Sand Replacement Test Set 150 mm BS

PRS-ZE0911 Sand Pouring Cylinder 150 mm dia. for PRS-ZE0910

PRS-ZE0912 Calibration Container for PRS-ZE0910

PRS-ZE0913 Metal Tray for PRS-ZE0910

PRS-ZE0920 Sand Replacement Test Set 200 mm BS

PRS-ZE0921 Sand Pouring Cylinder 200 mm dia. for PRS-ZE0920

PRS-ZE0922 Calibration Container for PRS-ZE0920

PRS-ZE0923 Metal Tray for PRS-ZE0920

STANDARDS : BS 1377:9, 1924:2
The Sand Replacement Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminum and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes.

Product Code Dimensions Weight (approx.)
PRS-ZE0900 300x300x440 mm 8 kg
PRS-ZE0910 300x300x500 mm 14 kg
PRS-ZE0920 500x500x660 mm 27 kg

PRS-A0500/E Sand Equivalent Test Set, EN Model

PRS-A0500/A Sand Equivalent Test Set, ASTM Model

PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN

PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM

PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm

PRS-A0506 Sand Equivalent Siphon Assembly

PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN

PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM

PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt

The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler.

PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately.

The Sand Equivalent Test Set is supplied complete with;

â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A,

â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E,

â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube,

â?¢ Plastic can - 5 lt.

â?¢ Weighted Foot Assembly,

â?¢ Measuring Tin,

â?¢ Wide-Mouth Funnel,

â?¢ Ruler,

â?¢ Special Carrying Case,

Dimensions 400x550x150 mm

Weight (approx.) 4,6 kg

Marshall Stability Test Machine with Digital Readout

Product Code Product Description

PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz

PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058
PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.

The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement)

The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine.

Platen Speed 50,8 mm/min
Capacity 50 kN

The PRS-AS0055 Marshall Stability Test Machine is supplied complete with;
â?¢ Load Cell, 50 kN
â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm
â?¢ Hand Wheel for Manual Control
â?¢ Breaking Head, 4â?�

Dimensions 550x700x1200 mm
Weight (approx.) 102 kg
Power 1100 W

SARS-CoV-2 Antigen Rapid Test Kit is an in vitro diagnostic rapid test for the qualitative detection of SARS-CoV-2 antigen (Ag) in human nasopharyngeal swab specimens from individuals who meet Covid-19 clinical criteria.

Key Specifications/Special Features - vitro diagnostic , Rapid Antigen Test Kit, SARS-CoV-2, Covid 19, Nasal Rapid Test Kit

Covid19 Rapid Test Kit
Detection of virus in 5-10 minutes
CE Certified
25 Kits in 1 Box
MoQ is 10,000 pcs

Product Description - Covid-19 SARS-CoV-2 Saliva Antigen Rapid Test Kit is an in vitro diagnostic rapid test for the qualitative detection of SARS-CoV-2 Saliva antigen (Ag) in human oropharyngeal (OP), nasal (NS), nasopharygeal (NP) swab, saliva or gargled water specimens from individuals who meet Covid-19 clinical criteria.

Product origin - Turkey / Istanbul

Minimum Order Size and Packaging details - 500

* 320 k ready stock Abbott test kits in Amsterdam.

*POL is given. Inspection any time after Loi.

Price: 6.10USD

15 second test your Covid used at Airports and all borders

15 second test your Covid used at Airports and all borders

ParsRos Automatic Compression Testing Machines

Product code

PRS-B423 2000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B6321 2000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/11 2000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B433 3000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6331/110 3000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz
PRS-B0210 High Precision Pressure Transducer and Electronic


PARSROS Automatic range of 2000 kN and 3000 kN capacity compression testing machines have been designed for reliable and consistent testing of a wide range of specimens.

These compression testers are the results of continu¨ous research to upgrade the testing machines with the latest technologies to conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM C39 in terms of its technical properties taking into account client requirements. These also meet the requirements of CE norms for the safety and health of the operator.

The advantages of performing tests on computer with using PARSROS Software, such as reporting, graphical output, etc.,


PRS-B4321and PRS-B4331Testing Machine is supplied complete with;
205x90 mm, �? 205x50 mm and �? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) 300 mm, Lower Platen 300
mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4321 and PRS-B4331 testing machines.

PRS-B6321 and PRS-B6331 Compression Testing Machines are supplied complete with;
165x90 mm, 165x50 mm and 2 pcs. 165x30 mm distance pieces

PRS-B4511 Upper Platen (with ball seating assembly) 165 mm, Lower Platen 165 mm.
PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6321 and PRS-B6331 Compression Testing Machines.
Safety Features
Maximum pressure valves to avoid machine overloading
Piston travel limit switch
Emergency stop button
Front and rear transparent durable plexiglas guards
Software controlled maximum load value

Product Code Product Description

PRS-B42212000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B62212000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6221/1102000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B43213000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63213000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/1103000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B0210High Precision Pressure Transducer and Electronic


PARSROS Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re¬liable and consistent testing of a wide range of specimens.

These compression testers are manufactured as a result of continuous research studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM C39 in terms of its tech¬nical properties taking into account the cli-ent requirements.

PRS-B4221 and PRS-B4321Testing Machine is supplied complete with;

â?¢dia. 205x90 mm, dia 205x50 mm and dia 205x30 mm distance pieces

â?¢PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4221 and PRS-B4321 testing machines.

PRS-B6221 and PRS-B6321 Compression Testing Machines are supplied complete with;

â?¢dia165x90 mm, dia 165x50 mm and 2 pcs Ã? 165x30 mm distance pieces

â?¢PRS-B4511 Upper Platen (with ball seating assembly) Ã?165 mm, Lower Platen Ã?165 mm.

PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6221 and PRS-B6321 Compression Testing Machines.

Product Code Product Description

PRS-B0510Concrete Flow Table Test Set

PRS-B0512Flow Cone for PRS-B0510

PRS-B0513Wooden Tamper 40x40x335 mm

The test set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen after working on a flow table.

The apparatus consists of a double steel table, an upper table measuring 700x700 mm and hinged at one side to the lower table.

The top table is inscribed and all parts are protected against corrosion. The stainless steel cone has a 130 ±2 mm top diameter, 200 ±2 mm base diameter and 200 ±2 mm height and 1.5 mm thickness.

Dimensions700x850x300 mm

Weight (approx.)40 kg

The Concrete Flow Table is supplied complete with;
â?¢Flow Cone
â?¢Wooden Tamper

Four Column Automatic Compression Testing Machines

Product Code Product Description

PRS-B52312000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B53313000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B54314000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B55315000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B0210High Precision Pressure Transducer and Electronic


PRS-B5231 and PRS-B5331 Testing Machine is supplied complete with;

Ã? 205x90 mm, Ã? 205x50 mm and Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B5231 and PRS-B5331 testing machines.

PRS-B5431 and PRS-B5531 Compression Testing Machines are supplied complete with;

2 pcs. Ã? 205x90 mm, 2 pcs. Ã? 205x50 mm and 2 pcs. Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4531 and PRS-B5531 Testing Machines

Aggregate Impact Value (AIV) Testing Apparatus

Product Code Product Description

PRS-A0650 Aggregate Impact Value (AIV) Testing Apparatus

The Aggregate Impact Value Testing Apparatus, meets with BS 812, it is robustly designed to determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact.

The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion.

The Aggregate Impact Value (AIV) Apparatus is supplied complete with;
Cylindrical Measure, 75 mm,
Steel Tamping Rod, 16x600 mm

Dimensions 450x350x850 mm

Weight (approx.) 52 kg

RYT-4220 : Plate Bearing Test Set 200 kN Capacity

RYT-4222 : Plate Bearing Test Set 500 kN Capacity

Plate Bearing Test Set is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements. A wide range of plate bearing test equipment are available, together with many accessories according to the different Standards and specific enduser needs. All test sets supplied complete with 1,5 m long flexiable hose with quick release coupling.

The RYT-4220 Plate Bearing Test Set 200 kN is supplied complete with:

Dimensions : 650x350x600 mm

Weight : 130 kg

200 kN Capacity Piston Assemly

Hydraulic Hand Pump,

Pressure Transducer,

Datum Bar - 2.4 m long , 3 pcs.

25 mm travel x 0.01 mm digital dial gauges with dial supports,

300 mm and 450 mm dia. loading plates,

The RYT-4222 Plate Bearing Test Set 500 kN is supplied complete with:

500 kN Capacity Piston Assemly
Hydraulic Hand Pump,
Pressure Transducer,
Datum Bar - 2.4 m long , 3 pcs.
25 mm travel x 0.01 mm digital dial gauges with dial supports,
600 mm and 760 mm dia. loading plates

PRS-ZE1200 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 200 kN

PRS-ZE1201 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 500 kN

PRS-ZE1202 : Piston Assemly, 200 kN capacity, for Plate Load Bearing Test Sets

PRS-ZE1203 ; Piston Assemly, 500 kN capacity, for Plate Load Bearing Test Sets

PRSGE-3800 : Hydraulic Hand Pump, 700 bar.

PRS-ZE1204 ; Loading Plate Ã? 300 mm for PRS-ZE1200

PRS-ZE1205 : Loading Plate Ã? 450 mm for PRS-ZE1200

PRS-ZE1206 ; Loading Plate Ã? 600 mm for PRS-ZE1201

PRS-ZE1207 ; Loading Plate Ã? 760 mm for PRS-ZE1201

PRS-ZE1220 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 200 kN

PRS-ZE1221 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 500 kN


This test method is used to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM D1194). It is also used for load tests of soil and flexible pavement components for use in evaluation and design of airport and highway pavements.

PRS-ZE1200 Plate Loading Test Set consists of a 200 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 300 mm and 450 mm dia. loading plates,


PRS-ZE1201 Plate Loading Test Set Set consists of a 500 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 600 mm and 760 mm dia. loading plates.


All test sets supplied complete with 1,5 m long flexiable hose with qu

PRS-ZE0790 : Swell Plate for CBR Swelling Test

PRS-ZE0792 : Tripod for CBR Swelling Test

PRSGM-0120 : Analog Gauge 30 mm travel x 0.01 mm division

PRSGM-0148 : Digital Dial Gauge 25x0,01 mm, LCD Display Data Output

PRGM-0152 : Digital Dial Gauge 12,7x0,001 mm, LCD Display Data Output

PRS-ZE0794 : CBR Soaking Tank (6 pcs. CBR Mould Capacity )

STANDARDS :

This equipment is used to monitor the swelling by placing it on top of the soil sample. The swell test consists of perforated plate (swell plate) with adjustable stem, dial gauge and dial gauge tripod for mounting swell dial gauge in position on CBR Mould Collar.

The prefered gauge and each other equipment should be ordered separately for swelling test.

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.)
â?¢ Choosing the compression or flexure frame by using the changeover valve.
â?¢ Pressing the START button on the control unit.
â?¢ The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
â?¢ Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

Automatic Cement Compression & Flexure Testing Machines

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

Setting test parameters, including pace rate (only required when the specimen type is changed.)

Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.

The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

PRS-A0610 : Wide Wheel Abrasion Testing Machine, 220-240 V 50 Hz(110 V 60 Hz version is available upon request)

PRS-A0610/1 : Wide Abrasion Wheel, for PRS-A0610

PRS-A0610/2 : Convert Equipment Set from PRS-A0610 Wide Wheel Abrasion Testing Machine to PRS-A0613 Narrow Wheel Abrasion Testing Machine

PRS-A0611 : Abrasive Corundum Sand 25 kg for PRS-A0610 and PRS-A0613

PRS-A0613 : Calibration Marble for PRS-A0610

PRS-A0612 : Narrow Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110V 60Hz version is available upon request)

PRS-A0613/1 : Narrow Abrasion Wheel, for PRS-A0613

PRS-A0613/2 : Convert Equipment Set from PRS-A0613 Narrow Wheel Abrasion Testing Machine to PRS-A061 - Wide Wheel Abrasion Testing Machine

PRS-A0610 : Mould, EN 12808-2, Polyethylene, 100 ±1x100 ±1x10 ±1 mm, for PRS-A0613

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Aggregate Impact Value (AIV) Testing Apparatus

Product Code Product Description

PRS-A0650 : Aggregate Impact Value (AIV) Testing Apparatus

The Aggregate Impact Value Testing Apparatus, meets with BS 812, it is robustly designed to determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact.

The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion.

The Aggregate Impact Value (AIV) Apparatus is supplied complete with;
Cylindrical Measure, Ã? 75 mm,
Steel Tamping Rod, Ã? 16x600 mm

Dimensions 450x350x850 mm

Weight (approx.) 52 kg

Product Code Product Description

PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz

PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058

PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.
The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

Product Code Product Description

PRS-AS0135 Water in Bituminous Materials Test Set (Dean-Stark Method) 220-240 V 50 Hz

STANDARDS : ASTM D95, D244; AASHTO T55, T59; IP 74/77; CNR No.101; NLT 123

The PRS-AS0135 test set is used for determining the water content of bituminous materials. The test is based on distilling the sample with a volatile solvent. The material to be tested is heated under reflux with a water immiscible solvent, which distills together with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settles in the graduated section of the trap, and the solvent returns to the still.

Test Set Consists Of;
Electric Heater with Thermo Regulator
Glass Condenser
Glass Receiver
Glass Still, 10 ml

Dimensions 200x200x450 mm
Weight (approx.) 4 kg
Power 250 W

.SOFTEC COVID-19 Antigen Test Kit (For Celt Test Use)
Fast Easy to Use Reliable
The SARS-CoV-2 Antigen Rapid Test (Nasal Swab) is a single-use test kit designed to detect SARS-CoV-2, the cause of COVID-19, with a self-collected nasal swab sample. The test is intended for use in symptomatic individuals who meet the definition of COVID-19 disease and is limited to asymptomatic individuals who have been in contact with confirmed or suspected cases of COVID-19 and at-risk healthcare workers. The SARS-CoV-2 Antigen Rapid Test (Nasal Swab) is a qualitative membrane-based immunoassay for the detection of SARS-CoV-2 nucleocapsid protein antigens in a human swab sample. There are single packs and 25 pieces of products. SOFTEC COVID-19 Antigen Test Kit (For Self-Test Use) (Pack of 25)

The price of the product is determined by the number of orders.

* Realy Tech Sputum/Saliva test for Coronavirus/SARS rapid test kit
* Price depends on quantity
* Minimum 500.000 pieces
* Price for MoQ: 3.6$
* Certificates & Technical Spec Sheets available

Antibody - 2019-nCOV/COVID-19 IgG/IgM Rapid test x 25 pack
Point-of-care finger prick test
CE marked
Produced under ISO 13485 standards
Independently validated using positive & negative blood samples against CMIA reference method
Accurate Results
Sensitivity IgG 99%, IgM 98% Specificity IgG 100%, IgM 99%
Specificity IgG 100%, IgM 99%
10-15 minute result
Virus Tracing App included
ONLY AVAILABLE TO REGISTERED HEALTH CARE PROFESSIONALS