We are trying to gain or inventing the products to be produced for the first time by our Research and Development Institute by means of the computer programmes called UNIGRAPHICS Cad-Cam. We also make moulds for plastic and aluminium injection.
Our Atom S model is designed for tractors 50 hp and above. Suitable for stripping, loading, etc. Ideal for trailer loading. Thanks to its ergonomic and lightweight structure, it will not tire your tractor. 1 mt or 1.2 mt bucket options are available.
Properties;
Lifting Load Max. 3.5 m.
Discharge Height Max. 2.6 m.
Weight 300-325 kg.
Height 170 cm.
Width 125 cm.
Bucket Width 100-120 cm.
Bucket Volume 0.30-0.35 m³
Number of Hydraulic Hoses 3
Required Power 35-60 hp
Load Capacity Maximum it can handle 800 kg.
Attaches that can be installed:
Pop-up Bucket Attachment, Roll Bale Attachment, Skewer Square Bale Attachment
Shake Beet Scoop :600 kg. up to 3.90 cm. height loading. Thanks to its vibration feature, it does not require any equipment thanks to its ease of pouring the remaining parts and soil in the basket chamber and the ability to easily be attached to any type of tractor. On the ladle are an 85lt pump with a domestic 9-element cutter and a Bulgarian 3-pack controller. The oil tank comes empty and works with hydraulic system oil number 27 lt- 32 or 37. Never use any other oil!
Beetroot and Earth Scoop with Scale System :If you want to meet your scoop needs outside of the beet season, you are loading beets into the truck with high additions from the stack. What you're looking for is beetroot with scales and earth loading scoop. Optional double-mouth. (Soil-beetroot)
Potato ( BigBag ) Crane:The potato loading crane with a loading height of 7 mt. has a lifting capacity of 1500 kg. and is suitable for unintended use in tractors with at least 4 outputs.Thanks to its powerful wheel wheel wheel system, it allows you to load your BigBag sacks without loading the tractor. A 125 c.m drop-down boom system is available. Boom system is made of high st52 hair. It comes with a quad sack apparatus.
Combined seed drill is a pull type sowing machine that is easy to use and drops cereal, legume and feed seeds and fertilizer to the seed bed opened by the discs continuously thanks to the helical sheaves with the requested quantity and depth with the help of leveling system.
Thanks to its structure, the hopper prevents seed and fertilizer to accumulate and therefore, an efficient seeding is performed by protecting bearing with the dusting system using dry system double bearings on the discs and by hydraulic disc penetration setting, which is performed optionally, that allows easy sowing of the seed or fertilizer into the requested depth and it is easy to clean thanks to its discharging levers on each hopper.
Besides these standard features of our combined seed drill, both three-point hitch and arrow system are its standard features. Thanks to these features, it is suitable for sowing and operation with a tractor on all types of soil conditions.
108 Software Development It Services Suppliers
Short on time? Let Software Development It Services sellers contact you.
Milking Machines
Milking Systems
Milk Cooling Systems
Milk Transport and Transport Systems
Nutrition Solutions
Animal Comfort
Fertilizer Solutions
Farm Equipment
2 Wheels Hay Rake
3 Wheels Hay Rake
4 Wheels Hay Rake5
5 Wheels Hay Rake
8 Wheel Carted Hay Rake
8+1 Wheel Carted Hay Rake
8 Wheel V Type Hay Rake
10 Wheel Carted Hay Rake
10+1 Wheel Carted Hay Rake
Rotary Rake
It is connected to the tractor with 3 hanger system and works with the movement
it receives from the tail shaft.
The blades cut shear with two-way movement between harpses. (Harps on this model Is still)
The automatic protection mechanism on It Is switched on when stuck in an obstacle, preventing damage to the machine.
The wings behind the cutting section open the tractor wheel space, preventing grains from spilling by crushing the harvested product by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
Hydraulic and Mechanical type two types are available.
It can be used efficiently in harvesting green feed crops and legumes.
Recommended usage method 1-2 normal gear 10 -14 gas shaped. ( Operator, Field Status may vary by Tractor Type. )
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
The blades cut shear between the harpses with two-way movement. (Harps are still in this model)
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wings behind the cutting section open the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
There are two types of hydraulic and mechanical types.
It can be used efficiently in harvesting green feed crops and legumes.
Recommended use is 1-2 normal gears 10 -14 gas. (operator, field status may vary depending on tractor type.)
Description
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
Leaf blades make shear cuts by moving in the opposite direction of each other with hair harpssa in the hair harpses. (In this model, hair is ly mobile on harpses.)
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel.
It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (Including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)
Double Cutter Bar Mowers
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
The two blades move in the opposite direction on top of each other, cutting shear.
There are no harpses on the blades in this model.
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)
