Type SOUTYPE 47/1500-30
Dimension LxWxH 1660x2320x150
No of tubes 30
Weight 75 kg
Area 3.85 m2
Absorber coating SS-AlNx /Cu
Flowed through element Copper pipe/Heat pipe
Heat pipe condensor diameter 8 mm
Transmission of the cover tube > 91%
Casing material Aluminium
Sealing material Silicon rubber
Insulation material Polyurethane and mineral wool
Material of glazing Borosilicate glass
Thickness of glazing 1.6 mm.
Pellet coolers are used to reduce the hot pellets coming out of the pellet press to the ambient temperature. The waiting time of the pellet in the cooler is controlled by adjustable level sensors on the cooler. By the temperature sensors at the pellet cooler outlet, the pellet feed temperature is seen at the machine discharge. By the distributor system at the inlet of the pellet cooler, evenly cooling is captured at every point by ensuring a homogeneous distribution and product height within the cooler. The feed dust in the hot air going to the aspiration unit is sent back to the system by the aspiration cyclone. After cooling, the pellets hardens and dust formation is prevented during packaging.
The moisture is reduced to extend the shelf life of the pellets.
Single or double-deck models are available depending on the intended use
GENERAL FEATURES:
Lower body side sheets are specially designed for fresh air intake
The lower grate can be driven by motor, pneumatic or hydraulic
The lower grate is designed to allow air entry
Body sheets have bolt and nut connections for easy assembly/disassembly
Marvel is the celebrated, trademark collector line of Solimpeks«. Its aim is to attain the highest level of quality in both its design and production. For this reason, the materials that are utilized in production are those of the highest quality in comparison to those used comparable products on the market. Moreover, Marvel collectors have been analyzed time after time in many countries of Europe, in The USA and in Australia for performance issues such as productivity, absorption and durability and have passed these tests successfully. With this track record, Marvel collectors, which have proven to be environmentally responsible through their employment of choice materials in the production process, have succeeding in receiving more than ten certificates from respected institutions.
Panel: Ultrasonic welded selective surface coated copper plate.
Glaze: Low ironed tempered glass with 91% transmission (EN 572-5 - EN 12150-I certified)
Sealing: Enclosure seals are UV durable EPDM materials. Glazing gaskets are one piece channel type with moulded corners to assure long life and avoids all water penetration.
Case: Collector cases are all aluminium coated with electrostatic black colour.
Insulation: CE Certificated High Density Rock wool
Flexible Connection: Fixed for preventing the headerinside pressure.
Back Sealing: Provided by clamps and silicone.
Air Ventilation Holes: Prevent probable inside huminity.
Back Plate: Embossed aluminium plate.
Wall Insulation: Special matt black painted glass wool for increasing performance.
Fast heat-up
As a result of large and well-positioned heating surfaces the water in the Reflex-Marvel boiler is heated extremely fast and evenly, offering the highest possible convenience in heated water for you.
Optimal heat insulation
High-quality insulating foams and linings ensure the highest possible protection against heat losses. Highest economy.
Different needs - different products
Reflex-Marvel boilers of the "S" series come with a nominal content of 150, 200, 300, 400 or even 500 litres to meet your individual needs.Reflex-Marvel boiler can be combined easily with all heating systems for oil,gas or solid fuels.Reflex-Marvel boilers are highly suitable for low -emperature heating systems. From the single-family house to the large commercial enterprise we have the right hot-water boiler for you. Reflex-Marvel boiler are produced accurate to size in cylindrical design and made of quality sheet steel ST 37-2.
Aluminium composite panels consists of a thermoplastic polyethylene core that is sandwiched between to outer flat aluminium panels. The polyethylene core is bonded between the two aluminium sheets providing a very lightweight, flat, smooth and strong rigid sheet.
The aluminium composite sheets can be coated with a number of coatings from pvdf or polyester paint depending on the customer requirement or process. Aluminium composites can also be produced in a wide range of colours including metallic’s and patterns that resemble woods and marbles.
Pvdf and polyester aluminium composites can be found in a range of applications from building claddings to signage as a replacement to heavier and expensive substrates.
Front panel: 1.50mm dkp steel-sheet
Back panel: 1.20mm dkp steel-sheet
Body: 2.00mm dkp steel-sheet
Each wing is congenial to each body
Reinforced support system alongside the wing
110 degree opening possibility
High carrying capacity with steel hinge
Automatic static painting system with latest technology
Aluminium composite panels consists of a thermoplastic polyethylene core that is sandwiched between to outer flat aluminium panels. The polyethylene core is bonded between the two aluminium sheets providing a very lightweight, flat, smooth and strong rigid sheet.
The aluminium composite sheets can be coated with a number of coatings from pvdf or polyester paint depending on the customer requirement or process. Aluminium composites can also be produced in a wide range of colours including metallic’s and patterns that resemble woods and marbles.
Pvdf and polyester aluminium composites can be found in a range of applications from building claddings to signage as a replacement to heavier and expensive substrates.
We supply all kinds of Iron Scrap, galvanized iron sheet roll, and HBI with good service.All the product is available contact us for more details.
For more information about the irons spesification,
