Brief Introduction of Wire Mesh Cable Tray Systems:
These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.
Features and Benefits of Wire Mesh Cable Trays:
1. Electroplated Zinc Finish
2. Fast Easy Installation
3. Mesh Design Allows Cable Exit or Entry at any point
4. Clear Cable Identification
5. Supplied in 3 Metre Lengths
6. Significant Cost Savings Compared to Standard Tray Products
7. Simple Creation of Fittings on Site
8. Wide Range of Sizes
9. Heights Shown are Internal Dimensions
Manufacturing:
Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP)
Mode: Top curved / Top Straight
Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated.
Color: Optional
Suggestions:
1). MATERIAL
The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed.
2). SURFACE FINISH:
A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free.
B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays.
C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site.
D). Pickled & Passivated should be used to stainless steel wire trays.
Specification for power and communications cabling containment.
1). SCOPE
Steel Wire Cable Tray conforming to the material and performance of this specification.
2). GENERAL
A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment.
B). Surface Treatments:
i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2)
ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729.
iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L)
C). Steel Wire Cable Tray Widths & Depths
i). Cable Tray dimensions are all internal.
ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm
iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm.
iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm
All trays are of 3005mm long
3). SPECIFICATION
a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -:
4 mm for trays of widths up to 150mm
4.5 mm for trays of widths of 200mm
5.0 mm for trays of widths of 300mm
6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm
b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050)
c). Trays will be constructed with a 50mm x 100mm mesh configuration.
d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray.
e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray.
f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld.
4. TESTS, CERTIFICATION AND CONFORMITY
a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537.
b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification.
c). Fire test certification should be published in accordance with the E30/E90 standard.
d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result.
We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays.
1 lv and mv power cables , telecommunication cables , lsfh , solar ,instrument and special cables.
2 copper rod 8 mm and copper wire from 1.60 to 3
3 pvc compounds.
According to the receiving orders from our customers collers (min 50kg-max. 1500kg) can be put of for sale with the preferred diameters and surface finishing characteristics such as; bright, extra bright, copper-plated, galvanized, annealed, annealed skin-passed, zinced, chrome plated and phosphate plated.
Technical and mechanical charecteristics: according to uni 3823/din/17223/eni 2701 norms
Production range: diameters from mm 1.50 to mm14.00
Applications:
This type of products lends itself particularly to the manifacture of
Grills and baskets for fitted kitchens
Grills for domestic appliances
Household articles
Supermarket trolleys and baskets
Promotional display units
Bird and pet cages
Omamental chains
Articles fort he car industry..Etc
578 Wire Netting Mesh Suppliers
Short on time? Let Wire Netting Mesh sellers contact you.
There are different sizes and sections for special profiles by the specialized methods such as turks heads and wire flatting. Together with the ordinary roun sections. Gunes wire also manufactures square, hexagonal, octagonal, triangulari rectangular, oval, half-oval, half-rounded, keystone, peeled round bars, ground bars and flat shaped sections and various sizes.
Diameter of wire: 1mm-20 mm
Packages: bunches
Weight: 25 kg-1000 kg
Proporties:
Possible to produce with any surface characteristics and with preferred rigidity.
Plating:
Hot galvanized or cold heading wire
Applications:
This type of product lend itself particularly to the manufacture of
For domestic appliances
Accesories of lighting products
Key and lock apparatus
Household articles
Metal nets/meshes
Curtains-venetian blind miles etc
According to the receiving orders from our customers all type of bars can be straighten and
Cut in respect of our customers diameter and length preferences. Gunes wire is continuing also to serve with the wire and tube surface grinding and polishing wire works from 4.00 mm to 80 mm diameters. Our wire straightening and cutting machines are suitable for ferrous, nn-ferrous anf high tensile wires(from 1.50 mm to 14.00 mm)
Production range:
Diameters from mm1.50 to mm14.00 and lengths from 20 mm to 4500 mm
Applications:
This type of product lends itsef particularly to the manufacture of
Grills and baskets for fitted kitchens
Grills for domestic appliances
Household articles
Supermarket trolleys and baskets
Promotional display units
Bird and pet cages
Omamental chains
Articles fort he car industry..Etc
The wire drawing machine is a heavy duty wire drawing machine, engineered for the drawing of high strength, high performance steel wire.
Our steel drawing machinery has a whole list of functions including an advanced user interface and a highly reliable motor overheating protection device.
Reduction rates per cross section are % 18 - % 25.
Engine power per each head 30 kw. 380 volt. Triphase.inverter speed controlled.
Wire feeding with clamp is maintained by low revolution pedal. Heads are special alloy gg 25 chrome reinforced cast iron.
Product Code: CM-01-SET-V
Installed Capacity: 850+650=1500 Watt (Double Resistance)
Supply Voltage: 220-240V ~
Frequency: 50-60 Hz.
Operating Temperature: 270 ° C
Cable: 3X1 mm² cable fireproof up to 200 ° C has been used.
Thermostat Regulation Indicator: 50-320 ° C
Resistor Material: Stainless Steel
Main Supply Cross Section: 3 x 2.5 mm² Supply Cable
Protection Class: IP 44
Main Fuse Value: 16 A (on the power connection line)
Other Remarks:
a- Three heads can be simultaneously installed on the iron.
b- The ON-OFF switch has been equipped with a light indicator for easier operation.
c- A special aluminum floor foot with a clamp has been installed providing the ability to operate everywhere.
d- The welding machine set includes heads of 20,25,32,40 mm, plastic pipe shears of 16-42 mm and other apparatuses you might need for PPRC welding.
1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding are available in the toolbox set.
4-1500 watt and more specific material it has.
1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding machine are avilable int he toolbox.
4-1500 watt and more
1-Duble heating elements with thermostat.Heating elements made of noncorosive material.
2-Yoke foot.
3- Alll aparatus required for PPRC welding machine are available in the toolbox set.
4-1500 watt
5-Guaranteed for 1 year.
6-Fibre -framed machine
7-Welding machine(capable of welding the pipe diameters up to 1,5 inch)
1-Double heating elements with thermostat.Heating elements made of noncorrosive material.
2-Yoke foot.
3-All apparatus required for PPRC welding are available in the vacuumed toolbox set.
4-1500 watt.
5-Guaranteed 1 year.
6-Fibre -framed machine.
7-Welding machine(capable of welding machine diameters up to 2,5 inch)
1-Double heating elements with thermostat.Heating elements made of noncorrosive.
2-Yoke foot.
3-2000 watt
4-Guaranteed for 1 year.
5-Fibre framed machine(dielectric and heatproof fireproof light and shockproof)
5-Welding machine 50-125mm(capable of welding the pi diameters up to 5 inch)
Ability of simultaneous cutting the two corners of pvc and aluminum profiles at the same time.
The machine is computerized, finding the measure and cutting automatically.Has a memory for cutting by sensitivity of 0, 2mm and unit stopper.
Right head is constant and only left head is flexible.
Possibility of one head cutting when needed.
There is hydro-pneumatic system and it is possible to cut at desirable speed without vibration
Diamond saws diameter is 420 mm.
Capable of cutting at 45-90 v45 degrees and interval degrees.
Flexible head can be moved millimetrically.
Width 4000 mm
Depth 800 mm
Height 1500 mm
Voltage 400 v 3 npe
Frequency 50 hz
Total power 3.5 kw
Air pressure 6-8 bar
Air consumption 70 lt. / min
Max. Cutting profile lengths 4000 mm
Min. Cutting profile lengths 300 mm
Machine weight 800 kg
Standard machine color ral 7032
Exothermic welding is a molecular connection which is the most efficient way to create a high-quality electrical connection. It minimises corrosion in underground conductor connections which brings problems such as loosening and separation and maximises the life and quality of grounding.
Produce from 0,8mm, 1mm, thickness galvanize steel profile.
Resistant against expolsive materials and strike.
Through its micro perforations can be preferred in places which showcase is important.
It can be painted to all Ral Colours through catalogue.
The price shows dollar/running meter
