The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.
Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.
The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;
â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.)
Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.
The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
Automatically saves the test parameters and test results.
The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
Box Culvert Machine; It produces Concrete Culverts between 800 -
800mm and3000 - 3000mm in minimum 1000mm and maximum
2000mm lengths.
Production is made by connecting a single mold in all sizes.
Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are
used in the vibrator.
This is a bagged gypsum based which could be directly applied on such materials as bricks, concrete, aerated concrete, etc
Used indoors.
Single layer creates a smooth surface.
Not need satin surface finishing plaster
Easy usage
Economical
High strength
Length - 2550 mm
Height - 2950 mm
Capac±ty - 22 m3
Steel sheet width - 4 mm
Total Length - 8450 mm
5th Wheel Heihgt - 1200 mm
Case - BH450 Steel Sheet
Axles and Suspansion: 3x9ton(Local axle),drum brakes, air suspension, front axle lift
Brake System: Knorr I-LVL, RSS (ABS function), 71/320 EWG
Tyres and R±ms Bridgestone 6+1 385/65 R22,5 , steel rims
Hydraulic system: Damper lift is accomplished with P.T.O driven pump and single acting 4 stage telescopic cylinder (180 bar)
Paint: After all the metal materials are sanded and primed, the required color is painted according to the customer's request.
5626 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Building and infrastructure works equipment, chemicals, home and office decoration products, building infrastructure materials, environmental and landscape planning products, textile and apparel products, metal products, food and agricultural products, motor vehicles and materials, sports equipment and materials, stationery equipment, cold storage systems and equipment.Foreign trade consultancy, marketing and supply services
SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container,
In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel,
Standard or specially different machinery
Capacities per shift
between 2.000 to 30.000 pcs Brick output
Sample brick insizes 250x120x65mm Solid or hollow
Mixing ratio
% 100 soil
%7 cement and water
POWER SD 5 READY PLASTERING MACHINE
It is a high-performance ready-made gypsum plastering machine that pumps and sprays all kinds of gypsum or cement-based dry mixes and is used in interior and exterior plaster applications.
Technical Specifications
Machine Type: POWER SD 5
High quality mixing
Easily disassembled and transported
High quality electrical panel application
2 years warranty period â?? Delivery export value package type.
Technical Data
Power Supply 380 V - 50 Hz
Motor Power 5.5 kW
Compressor Capacity 250 liters/min - 5.5 bar
Carrying Capacity * 5-40 liters/min (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.)
Water pump 50 liters/min - 0.75kW
Transport Distance Horizontal * 40 meters (Standard if needed this will be long - option)
Transport Distance Vertical * 30 meters (Standard if needed this will be long - option)
Reservoir Volume 130 liters
Maximum Weight 285 kg
DPM High Pressure Polyurethane Dosing Machine is suitable for different applications (automotive, construction, white goods etc.). The machine has 2 x 200 lt raw material tanks, filling level monitoring, temperature and pressure transmitter, 2 automatic raw material filling pumps, PLC Control screen, frequency driver etc. equipment. Machine equipment is prepared in line with the customer's request.
According to the request and product type; Our machines are capable of open and closed casting. Our company, an innovative leader in its sector and region in the production of Block Foam, Rigid Foam, Cold cure Foam, Visco and cold room panels, produces polyurethane dosing machines with 30 gram - 4000 gr / sec high pressure injection capacities. Our components used on the lines are selected from fully European and Turkish well known brands.
For additional information, technical documents or price information you can send E-Mail.
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 2000 and 2300 units per hour and it is able to produce paving stone and briquettes in capacities ranging from 1200-1500. manual, semi-automatic and fully automatic preferred fixed machines.
The production capacity is 2600-3000 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 1500-2000 units. manual, semi-automatic and full automatic preferred fixed machines
Hourly production capacities ranging amount capable of producing briquettes 5500-6300 ratchet paving stone production capacities and can vary from 4000-4500 units, are semi-automatic and fully automatic machine preferably constant.
5626 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
