Find Verified Remote Controls Suppliers, Manufacturers and Wholesalers

curtains
Specifications : Motorized, workplace curtains, domestic curtains, resort curtains Light control Dust control Temperature control
Technique: Hand Woven, Woollen , polyster, Hand Tufted etc.
Size: Customized
Colors: Red, Mehroon, Golden, Brown
Material: wool, cotton, jute

Universal input pid process controller
With smart i/o module system

- 4 digits process (pv) and
4 digits process set (sv) display
- universal process input
(tc, rtd, mvz , vz , maz)
- optional secondary sensor input
- dual or multi point calibration
For zvoltage / current input
- configurable on/off, p, pi, pd and
Pid control forms
- adaptation of pid coefficients to the system
With auto-tune and self-tune
- manual/automatic mode selection
For control outputs
- bumpless transfer
- smart i/o module system
- programmable heating, cooling and
Alarm functions for control outputs
- motorized valve control function
- 8 steps profile control ( ramp & soak ) function
And start-hold-stop by using logic input module
- remote set point function by using analogue input modules
- retransmission of process value or process control
By using 0/4...20 maz current output module
- detection of heater failure by using 0...5a vct input . Module
- hardware configuration by using input/output modules
- rs-232 (standard) or rs-485 (optional) serial communication with modbus rtu protocol


Application fields applications

Glass motorized valve control
Plastic profile control
Petro-chemistry pid process control
Textile heater failure detection
Automative
Machine production industries

Features

3 phase mains and 3 phase generator voltage measurement,
3 phase load current and earth current measurement,
Contactor open and close relay outputs for mains and generator,
Configurable 6 inputs and 4 outputs,
3 resistive sender inputs for oil pressure, temperature and level,
Stop or fuel selenoid selection,
Programmable weekly working permit calendar,
Maintenance warning (working hour or elapsed month),
Exercise at programmed time intervals,
Off, manual, auto and test mode,
Power measurement by kva, kw, kvar, kvah, kwh, kvarh,
Compatible to diesel or gas generators

* sends sms to pre-defined gsm numbers for alarms
* controls the generator and monitors status information of the generator by sms
* remote control via internet, intranet, gsm or dial-up modem
* access to multiple generators by gen-agent scada software
* authorised access, secure communication
* suitable for telecommunication projects
* automatic transfer switching control and engine control
* logs last 32 events & alarm informations
* full metering facility, energy and power measurement

professional fingerprint & RFID lock system for Hotel and home & office.keep high safely for home and office.and hotel.
Multiple unlock mode: Fingerprint ,Password,Smard Card and Combination Mode.
High sensitive touch keypad with blacklight ,easy use even in the darkness
Easy operation thanks to the humanity and clear voice guidance.
Fingerprint sensor auto power on due to the IR senor embedded
Support scramble code to protect the password security
Doorbell built in offers very convenience for the visitor
Auto unclock/close with high quality motor inside.
Support DIY installation just with a screw driver.
Powered by AA Battery and with low battery alarm
Wrong try lock up function (will lock up 1Min after 5times continues wrong input)
Support external emergency battery input
Optional Remote control
password door digital lock

FELIS Single Needle Frame Type Mattress Quilting Machine
FELIS is a frame by frame single needle computerized quilting machine. It has a moving sewing head and moving frame in order to accelerate the movements by reducing the weight of moving parts.
With the advantage of the moving sewing head, FELIS also brings 50% space requirement advantage compared to conventional frame by frame quilting machines. It needs half the space of a conventional fixed head quilter.
With the ability of quilting very different products, FELIS offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill.


Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
High operator security systems
Automatic frame measure control system
Remote & Smartphone production monitoring system
Easy pattern adaptation
Flexible and user friendly software : EtQuilt

BFP-100 is a full automatic foam block compression and mattress packaging machine. It increases the manufacturing capabilities by reducing the required warehouse. Thanks to BFP-100, 4 times more buns, foam layers, rails can be shipped or stored with the same volume

Increased shipping capability by reducing the volume down to 25%
Minimized distortion on the foam by having flat pack only
Increased storage and manufacturing capabilities
Capable of packing buns of foam or large stacks of foam sheets
Maximum product protection with advance compression control system
Hydraulic compression system at infeed and outfeed sections
Upper and lower conveyor at the pressing units to move the product under compression
Less plastic consumption and tighter packs thanks to infeed compression system
Moving infeed part of the machine with hydraulic cylinder to bring the compressed product to the outfeed section
Double sealing lines for all sealers
The highest consistency of sealing thanks to upper and lower heating system for all sealers
Unique heat transfer system throughout the whole length of the sealing wires
Advanced heat control system for the sealers
Automatically adjusted sealer height according to compressed product height
Advanced data collection and remote troubleshooting with OMRON Controllers (EtherCAT)
Adjustable timings for each sealing process for perfect seal with respect to different thickness of tilm and compression amount
Ability to give multiple foam pieces such as foam rails, layers, etc.
Motorized hoist for easy plastic change.

HYDRA Double Head Double Roll Feeding Continuous Quilting Machine
HYDRA is a full automatic double feeding system, high speed double heads quilting machine for upholstery, mattress and home textile industries. It performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. The double feeding system offers quilting two rolls at the same time while offering motorized width adjustment for single feeding mode with the exchange time of 20 seconds. The double feeding system is very useful for high capacity sofa production as well as mattress headboards. It doubles the production of sofa and headboards by quilting two rolls at the same time. On the other hand, changing the mode of feeding to single roll makes you able to quilt high end luxury mattresses as well as wide home textile products.

Full automatic feeding, tensioning, quilting and cutting
Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
Operation modes : symmetric ( Mirror like ) , parallel, single needle
Standard length & sides cutters
High operator security systems
Brushless servo motors
Automatic fabric measure control system with great accuracy
Remote & Smartphone production monitoring system
Electronic position controlled fabric with adjustment
Transition between single to double roll feeding system in a minute
Flexible and user friendly software

For semi automatic elevator doors. Operated with a retiring cam . Ce marked, double safety system .

24 units per pack .In 40*40*50 cm cardbox. Weighs 15 kg per pack.

TIGON Single Needle Continuous Mattress Quilting Machine
TIGON is a full automatic feeding system high speed single needle quilting machine for high end luxury mattress, home textile and upholstery works. TIGON performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length.
With the ability of quilting very different products, TIGON offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill.
Your mattresses, headboards, comforters will overtop among others with the aspects of stitch quality, pattern designs, sustaining quality as well as your efficiency.

Full automatic feeding, tensioning, quilting and cutting
Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
Standard length & sides cutters
High human security systems
Brushless servo motors
Automatic fabric measure control system with great accuracy
Remote & Smartphone production monitoring system
Electronic position controlled fabric width adjustment
Easy pattern adaptation
Flexible and user friendly software : EtQuilt.
High quality sewing head: Durkopp Adler
Max. Sewing speed: 3400 RPM // 21 m/min (according to the material filling)
Max. Jumping Speed: 60 m/min
Max. Stitch area: 2.20 x 2.60
Max. Fabric width: 2.45 m
Suggested needle size: 120-160 (material dependent)
Number of feeding rolls: 5 (options are available upon request)
Stitch length: 1-10 mm (may change according to the material filling)
Automatic upper and lower thread cutting system
Max. Thickness: 9-10cm (material compressibility dependent)
Stitch type: Lock-stitch
Automatic integrated panel cutter in length
Advanced Side Cutters
Automatic lubrication for the sewing head as hook and needle part
Statistical production graphics
Immediate error solving with visual error display
Online consultation with ElektroCARE system
Reliable OMRON controllers
Optical barriers for human safety
Durable FESTO pneumatic system with low air consumption
No need for repair machine thanks to ability to start from the desired point.
No need to draw again for scaling, rotating and arraying
Motorized width adjustment of the clamps for different fabric width
Automatic measuring of the physical maximum area of sewing to double check with the active pattern design
Pattern Design Preparing Software is Included.

C.K.K. 552 - Double Head Welding Machine
Welds two corners of PVC profiles
Adjustable welding pressure and profile clamping pressure.
Fully automatic and program controlled.
Has separate digital timing control for melting and cooling


Technicial Specifications
Voltage 220 V
Frequency 50 Hz
Total power 4,5 Kw
Air pressure 6 Bar
Air Consumption 70 lt/dk-min
Dimensions (mm) 890 x 4010 x 1720
Weight (Kg) 475

ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed.

Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.

Elgo P40T Control Unit or Cybelec Cybtouch 8 - Touchscreen
CE-Norm
Sheet Slider at rear
Motorized Blade gap adjustment
Ball screw back gauge 1000 mm
1 mt. Flip up finger guards with flexi glass
1 Squaring arm L= 1500 mm, with scale & T-Slot and tilting stop
2 Support arms L=1000 mm
Ball Transfer Tables
Stroke Counter from control unit
Rubber pads for holddowns
LED llumination & Shadow wire
Top 2 side & Bottom blades with 4 side

(Y1, Y2, X) 3 axis Synchro Press Brake
Manual Crowning
Motorized Crowning
Control Unit - Cybelec Cytbtouch 12 Graphic Control
Non CE with Manual F.AKAS FPBS (for Top Beam )
Quick Release European Clamping system
60mm Die Holder
LED Lights on front cover
Back gauge : Motorised & Linear guide & Ballscrew system
Back gauge fingers - height adjustable
Back gauge motors: AC motors
Sliding Front Arms with full length linear guide
Safety covers for side and light barrier for the back

Y1, Y2, X, R (4-Axis) Synchro Press Brake
Control Unit - CNC Cybelec Cybtouch 15 (Upto 6 axis) or Delem 58T with Profile T light
Non CE with Manual F.AKAS FPBS (for Top Beam )
CNC controlled motorized crowning system
European Quick Release Clamping system
60mm Die Holder
LED Lights on front cover
Sliding Front Arms with full length linear guide and brushes
Back gauge: Mitsubishi Servo Motor & Linear guide & Ball bearing system
Special cover design

LEON-L - Single Needle Lock Stitch Border Vertical Stitch Machine
High quality reliable lock stitch PFAFF 335 sewing head - Lock-stitch or Chain-stitch sewing head Threar break detection sensors Low amount of material warning system Unlimited number of linear pattern storage and creation NC axis control system Automatic needle up positioning Ergonomic design for thread recovery No operator requirement with auto stop-alert system Touchscreen Control Panel Full automatic process with PLC Max. Sewing speed: 2300 rpm Max. Sewing width: 26.5 cm (10.5 inches) Max. Stitch length: 6 mm Capacity of pattern numbers: 400 pcs Auto border roller Auto stop at preset yardage Smooth operation with PLC control Custom pattern programming with touchscreen Ability to sew limitless 180° linear patterns Weight: 500 kg Power requirement: 2.5 kW

Usefull For Knitting/weaving Fabrics
Rolling Without Tension,automatic Tension Adjustment
Adjustable Speed Control (0-60 M/SN)
Precise Meter Measurement
Perfect Edge Guiding System

Drilling and cutting process on the part of the same job
Auto tool cooler and oil system.
Industrial CNC control 15 Touch screen Panel
Lineer sliding bridge and Helix Rocks Propulsion System.
Drilling capacity : Min. M5 Max. M32 (HSS,UDRILL)
Drilling Depth : 100 mm. Max.
Drilling tool speed : 70-110 m/min.
Drilling speed : 0.15-0.35 mm/rev.
Spindell speed : 1500 RPM Max.
CNC Positioning Accuracy : 0,02 mm.
Max. (X&Y) Positioning speed : 15000 mm./min.
Bridge movement control : Dual Gantry AC Servo Drives.

Leon-CS2 is a CNC double heads border quilting machine for very special border designs. The optional multineedle border quilting head offers various more designs with the ability to add secondary materials on the border such as ribbons, 3D spacer, etc.

High quality reliable chain stitch PFAFF 5483 sewing heads with automatic lubrication
Max. Sewing speed: 3000 rpm (material dependent)
Max. Stitch length: 5-6 mm (material dependent)
Ability to work as single or double sewing heads
Adjustable distance between the two heads
Limitless 180° pattern designs with cnc control and servo drives
Servo controlled sewing heads
Automatic footlift
Max Quilting Width: 26.5c
Auto border roller
Auto stop at preset yardage
Smooth operation with PLC control
Custom pattern programming with touchscreen
EtQuilt Software Adapted on a PC
Pattern Making Software
Online training and trouble shooting
Unlimited number of designs
Weight: 700 kg
Power requirement: 4 kW

LEON-CS is a high speed double chain-stitch border quilting machine with self lubricating sewing head. With its advanced control system it offers not only vertical stitching but also any 180° linear patterns. You are able to create your own designs by using the touchscreen and save up to 400 different patterns. LEON-CS offers great alternatives to multi needle quilters.

LEON-CS is now available with 40 cm (16 inches), 50 cm (20 inches), 60 cm (24 inches) sewing width.
Ability to work with other border machines
Touchscreen controller
Custom pattern programming with touchscreen
Robust, high speed chainstitch sewing head with automatic lubrication

All of our products are always made at the highest level with the latest System Production Technologies, Quality Standards, Durability Tests and Quality Controls.

As Aldekon Furniture, we have adopted customer satisfaction as the first priority.

Your Corporate Solution Partner in All Sofa and Amphitheater School Desk Projects

Our products are our own production.
Color Alternatives for Products and Other Details CommunicationsII on you late.All of our products are always made at the highest level with the latest System Production Technologies, Quality Standards, Durability Tests and Quality Controls.

As Aldekon Furniture, we have adopted customer satisfaction as the first priority.

Your Corporate Solution Partner in All Sofa and Amphitheater School Desk Projects

Our products are our own production.
Color Alternatives for Products and Other Details CommunicationsII on you late.

All of our products are always made at the highest level with the latest System Production Technologies, Quality Standards, Durability Tests and Quality Controls.

As Aldekon Furniture, we have adopted customer satisfaction as the first priority.

Your Corporate Solution Partner in All Sofa and Amphitheater School Desk Projects

Our products are our own production.
Please contact for product color alternatives and other detailed information.

All of our products are always made at the highest level with the latest System Production Technologies, Quality Standards, Durability Tests and Quality Controls.

As Aldekon Furniture, we have adopted customer satisfaction as the first priority.

Your Corporate Solution Partner in All Sofa and Amphitheater School Desk Projects

Our products are our own production.
Please contact for product color alternatives and other detailed information.

P.F. 100 - Portable Milling Machine
Creates locking holes, section holes, water gutters, window holes
Allows 1:1 ratios
Opens grooves and holes in PVC profiles at different angles
Chromium-plated shafts
Cast aluminum machine body
Plated pattern
Manual controlled


Technicial Specifications
Voltage
220 V
Frequency
50-60 Hz
Total power
1,1 Kw
Dimensions (mm)
680 x 490 x 490
Weight (Kg)
39

P.K. 101 - Portable End Milling Machine
Portable
Manual controlled
Multi-system (Adaptable for all profile brands and types)
Cast aluminum machine body
The carbide tool can be designed due to profile type
Chromium-plated shafts
Adjustable tool height


Technicial Specifications
Voltage
220 V
Frequency
50-60 Hz
Total power
1,1 Kw
Stroke (mm)
210
Air Consumption
12 lt/min
Dimensions (mm)
440 x 610 x 490
Weight (Kg)
39

Safety machine.
*It slicers 250 gram bread up to 3 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 V Control Panel
*Has 2 years guarantee for production and parts defects.

Technical Features
Width: 700mm
Lenght: 730mm
Height: 1350mm
Weight: 171 kg
Power:0,55kw.

Safety and semi automatic machine.
*It slicers 250 gram bread up to 1, 5 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 v control panel
*Has 2 years guarantee for production and parts defects.

Technical featrures
Capacity:500/bread a hour
Width:620mm
Lenght:720mm
Height:1310mm
Weight:190kg
Power:0, 55kw.

T.K. 551 - Corner Welding Machine
Makes corner welding of PVC profiles.
Full electronic and full electro-pneumatic system
Fully automatic and program controlled.
Single table movable system
Adjustable welding angles between 30 â?? 180 degrees
Digitally adjustable heating and holding times
Adjustable welding and profile pressure
Clamps the profiles one by one at each press of the foot pedal
Fault warning system.
Low energy and air consumption


Technicial Specifications
Voltage
220 V
Frequency
50-60 Hz
Total power
2,5 Kw
Air pressure
6 Bar
Air Consumption
12 lt/min
Dimensions (mm)
660 x 660 x 1420

Leon-vr double border serging machine

The leon-vr is a high speed double border serger with right and left heavy duty pegasus overlock heads. With the versatile structure it is able to work from 5 cm to 50 cm wide borders.

Leon-vr can be stand alone serging machine or it may be coupled with border mark and cut station, border tack and jump machine, handle attaching machine, etc.

Servo motor driven puller system
Robust pegasus sewing heads
Yardage counter
Independent sewing drives: no mechanical transmission
Touchscreen controller
Optional over/under double border serger with juki heads leon-vr-l

Elgo P40T Control Unit or Cybelec Cybtouch 8 - Touchscreen
CE-Norm
Motorized blade gap adjustment
Variable cutting length
Rake angle adjustment
Table with iron balls
Rubber Pads for hold down pistons
Ball screw back gauge 1000 mm
1 mt. Flip up finger guards with flexi glass
1 Squaring arm L= 1500 mm, with scale & T-Slot & Tilting stop
2 Support arms L=1000 mm, with T-Slot & Tilting stop
3 Support arms L=1000 mm, with T-Slot & Tilting stop
Illumination & Shadow wire
Top blades 2 side & Bottom blades with 4 side

The leon-pt mattress border side stitching machine is designed to make luxurious hand-stitched borders. Unlike the machines in the market, leon-pt offers not only hand-stitched border but also circle, rectangle, plus shape, s shape, and various different figures to be stitched.

The leon-pt4 can make one mattress border less than 3 minutes according to number of tacks and mattress size. It offers unlimited positioning of tacks as 2-3-4-5-6 tack on each row. It offers ability to create different tack designs using the touch screen panel.

No quilt repair machine: ability to continue sewing from the stop or desired point
Servo motor driven motion control system
Reliable jukä° lk 1900 tacking heads
Automatic bobbin finish detector
Smooth movement of the border for accurate and straight tacks.

WHY FIBERMAK ?


* 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes
* Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower
* 70% energy save by fiber optic laser technolohy is plant friendly.
* There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak.
* There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable
* You can make production 24 hours a day and may save 50% per each costs
* You can prevent from production faults by automation in your premises
* You save from moulds and apparatuses.
* You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality)
* FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions.
* Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles.



EFFICIENT
High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE
Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE
Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling
POWER AUTOMATION CONTROLLER
Power Automation CNC control with integrated inputs and outputs
The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs

Designed to meet slicing and packaging processes in the companies with high capacities.
*Breads placed on the band push each other and a continuous slicing is provided.
*Slicing is made in the desired speed through band speed adjustment.
*It is not proper for single slicing on the bench.
*Height can be adjusted in accordance with the bigness of bread.
*Machine is equipped with a packaging apparatus with fan to open the sachet as for packaging the sliced breads.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads
*Sliced breads can easily be pushed by hand into the sachet that is opened by air. *After putting the breads in, the sachet is taken apart and the sachet down is again opened by air.
*Slice thickness can be adjusted from 8 mm up to desired value.
*It is produced with standard electrostatic kiln dyed and optional stainless body.
*It is easy to carry through the wheels.
*24 V Control Panel
*Has 2 years guarantee for production and assembly defects
TECHNICAL FEATURES
CAPACITY:1500/BREAD A HOUR
WIDTH:1180mm
LENGHT:1760mm
HEIGHT:1300mm
WEIGHT:298kg
POWER:1,59KW.

LEON-HD-FINISH is a full automatic horizontal handle attaching, border measuring and border cut and close machine.
LEON-HD-FINISH feeds pre-made handles from the roll, it automatically pulls the handle, cuts, folds and puts on the handle sewing head, sews the handle and the border is pulled to the next handle or cutting position.
The versatile design not only offers premade handles roll feed but also one by one handle feeding (for embroidered handles).

High labor, time and space savings
Touchscreen controller
Ability to work with other border machines
Easy border program creation
Reliable positioning thanks to servo motor driven pulling system
Heavy duty auto border cutting and closing
Optional border marking system
Automatic Border Measuring, Handle Setting, Eyelet Hole Drilling, Border Cutting and Border Closing
Quick Changeover of Feeding Rolls for Border and Handle
Lockstitch sewing head for closing with needle positioner, automatic thread trimmer and footlift
Automatically detects and cuts out splices and defects
Automatically stops when any of the material is over
Stores up to 100 mattress styles
Programmable recipe system
Self-diagnostic software
Heavy-duty feeding module with urethane rollers

Category: Air Cooled Water Chillers, Chiller Systems
Product Code: BHS eco-CH series
Capacity: 11 kW - 156 kW between 30 different models


BEO Water Cooling Chiller , our systems modular transport with the advantages of being given, installation, maintenance and repair applications providing convenience. In hardware exchanger stainless plate with minimum power loss, maximum performance is obtained rapid cooling and heating . All used in the production of chromium-nickel body 304 and fasteners and copper nickel alloy condenser sea conditions with many years of durability it shows. High and low gas pressure protection, the water flow control and sensor system is placed under freezing full protection.

Usage areas
Beon Heat Pump Chiller Groups ; The heat pump (heating, cooling) feature is used in every field requiring hot and cold water to be conditioned. A suitable energy level ++ Ultra Quiet compressor system through eliminating noise pollution.

Boutique Hotels Comfort Purposes
Businesses Industrial Machinery, Equipment
Cooling of the mold
The need for cooling machines such as the Punto Source
Plastic Injection Molding Industry
Wire EDM Machines
Fan coil systems
It is used in many areas such as smoothly.

11kW - ?156 kW capacity range of 30 different models Beon There is Midi Eco Chiller Group Our manufacturing.

Low capacity and high capacity for Your Needs

ET-ROLL-310 is a full automatic mattress rollpack machine with the self-wrapping system. The mattress is wrapped fully automatic without any need for manual hand bagging.
Any type of mattresses are fed by the conveyor and wrapped, compressed, sealed and rolled.
Robust structure is able to apply 50 tons of hydraulic pressure on the mattress in order to make the mattress completely flat and easy to rollpack.

- Thanks to adjustable pressing amount and 90° cross conveyor before the rolling system, ET-ROLL-310 can also be used as a normal mattress wrapper without rolling.
- Durable resistances with cooling system for uniform heat distribution
- No wiring problems and energy saving thanks to cold sealing system
- Reliable Omron control system with the highest efficiency
- No hand bagging thanks to auto wrapping system
- Self-adjustment for different sizes of mattresses
- 50 Tons hydraulic pressure mechanism
- Robust structure
- Ability to use as mattress wrapping only without fully compression and rolling
- Ability to adjust heating-cooling time for different film thickness
- Automatic side film cutting system
- Hydraulic rollpack exit system with adjustable roll diamater
- No damage on the mattress thanks to rollpack exit system from the back
- Multidirectional cross conveyor sends the mattress to the rolling unit or send it to other direction for only-wrapped mattresses
- Ability to work with pocket spring, foam and latex mattresses (bonnell is not suggested for the quality of the rolled mattress, although the machine is able to roll)
- ElektroteksCare: online after-sales service

We produce brake systems for construction machines.

brake systems
wheel loader brake systems
brake systems inc
vehicles with dual air brake systems
trailer brake systems
automobile braking system
braking systems are
braking systems autonomous
brake assist systems
break away systems
brake actuating systems
drum brake systems are typically found
wedge brake systems are designed to be
trailer brake systems australia
air brake systems
all brake systems
abs brake systems
alfred teves brake systems
air brake systems catalogue
airmaster brake systems
antilock brake systems
automotive brake systems pdf
aftermarket brake systems
as brake systems inc
brake bleeding systems
brake bleeder systems
brake bike systems
brake by systems
air brake systems brisbane
automotive brake systems book pdf
all brake systems bv
break bell system
phoenix systems brake bleeder
pressure brake bleeding systems
baer brake systems
bike brake systems
bendix brake systems
boat trailer brake systems
bosch brake systems
brembo brake systems
buffalo brake systems
blank brake systems release the brakes momentarily
bendix air brake systems
bsi brake systems
brake system components
brake system components diagram
brake system components pdf
brake system car
brake system control module
brake system calculator
brake system cleaner
brake system calculations pdf
brake system check
brake system cessna 172
continental automotive brake systems
continental automotive brake systems india pvt. ltd
car brake systems
continental automotive brake systems (i) private l
contrast the two types of power brake systems
cpp brake systems

Beo Mini Chiller Chillers Eco Series ; It is particularly low capacity cooling needs series products manufactured in mind.

Water Cooling Group at our manufacturing producers starting at 1 Hp product manufacturing is do I lower capacity, which is also unnecessary energy consumption during use in initial investment costs and needs.

Beo Mini Chiller Water Cooling Group Eco Series without compromising the quality of the water chillers as well as our other first class are manufactured with equipment. The 1/4 HP (780 kcal) The aim of our production starting from the ground, while the initial investment costs and most importantly A ++ energy efficiency with our compressors and equipment to save energy is to.

Beo Mini Eco Series Chiller Chillers Our product is the ideal solution for low-capacity water cooling.
BEMC14: Beom Mini Chiller Water Cooling Group Eco 1/4 Hp - 780Kcal / h 220 V AC

BEMC13 Beon 1/3 Hp Mini Chiller Water Cooling Group Eco - 970Kcal / h 220 V AC

BEMC38 Beon 3/8 Hp Mini Chiller Water Cooling Group Eco -1.300Kcal / h 220 V AC

BEMC34 Beon 3/4 Hp Mini Chiller Water Cooling Group Eco -1.800Kcal / h 220 V AC

Beon Mini Chiller Water Cooling Group Eco Series General Features

Water Tank PVC ABS
Digital thermostat
CFC Free R134a gas
Ultra quiet compressor
Equipment in CE standards
Electrostatic Painted rust and scratch-resistant cabinet
Thanks to the portability feature Portable
Ergonomic design saves space
Water flow warning system
Water flow control system
Beon Mini Chiller Water Cooling Group Uses Eco Series

Hanging the cooling jaw and the fixed spot welding machines and transformers
In the seam welding machine transformer cooling jaw and
The cooling of the oil hydraulic press
the cooling of the wire erosion machine
use water to cool the bread production
acid with acid the temperature in the coating property of maintaining the desired temperature

SLICE-R is a roll slitter which is used for cutting the roll of textile to the desired with of roll.
With its tempered blade it is able to cut even the hardest materials such as elastic non woven, knitted fabric, 3D spacer, leather, etc.
Unlike the machines in the market, SLICE-R has advance mechanisms in order to obtain precise slitting of the rolls without wasting your materials by unsuccessful cutting attempts. The strong tempered blade not only offers precise cutting, but also much longer durability. Automatic double side sharpening system, blade cooling and roller stabilizer presser support excellent cutting quality while ergonomic blade safety cover, motorized right-left motion of the blade and unlimited maximum cut width provides the highest efficiency and ergonomics.

Smooth nonwoven, knitted fabric, jacquard fabric, leather, 3d cutting thanks to robust structure and the blade
Roller stabilizing presser for accurate cutting
Heavy duty tempered blade for cutting various materials
Motorized right left motion of the blade mechanism
Easy Pneumatic Guide Lock System
Motorized right-left positioning of the blade
Inverter driven positioning of the blade
Ergonomic blade safety cover mechanism
Double Side Automatic Blade Sharpening Mechanism
Quick cutting of the rolls thanks to adapted sizing ruler.
Blade air cooling system
Heavy duty blade

Max. Fabric diameter: 30 cm
Max. Fabric width: 250 cm (optional 320 cm if requested)
Fabric cutting width: 4-245 cm (depending on the compressibility and tightness of the material)
Blade diameter: 52 cm
Heavy duty tempered blade for cutting various materials without problem
Motorized right and left motion of the blade
Ergonomic roll guide locking system with pneumatic cylinder
3-points blade cooling system
Inverter controlled blade rotation and blade right-left motion
Auto sharpening pneumatic motors for right and left side of the blade
Additional roll presser rollers for steady cutting operation
Automatic opening blade safety cover
Robust structure
Weight: 550 kg

HEMMER Automatic Panel Hemming Machine

One of the most time consuming part of mattress production is flanging the quilted panel.
With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel.

Full automatic process
Two Working Modes: Synchronized with your existing quilting machine
Feeding the roll of quilt
Side and Length Cutting and Sewing
4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head)
4 needle double chain-stitch heavy duty sewing unit (cross sewing head)
Adjustable width and length of the quilt
Adjustable distance between left and right head with motor
Wide range of quilt thicknesses
Material exit with conveyor
Automatic thread cutting
Accurate finishe measures of the quilts
Automatic side-waste removal system to the reserve
High safety systems
Servo driven system
User-friendly software
Easy tape edging of the quilt after closing
Online maintenance and training service

One HEMMER has the capacity of 5 flangers.
There is no panel cutter needed
The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER
Ability to use as panel cutter only
Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting
Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy
Ability to adapt the HEMMER with any existing multineedle quilter.
High quality chainstitch sewing heads
Max. Speed: 20-22 seconds per panel (may change according to the filling)
Max. Material thickness: 7.5 cm (may change according to the compressibility of the material)
Number of sewing heads: 3
Max. Quilt width: 2.50 m
Min. Quilt width: 1.40 m
Min. Quilt length: 75 cm
Automatic thread cutting
Automatic side waste removal system
Full automatic process with 4 sides cutting and hemming
4 needle chain-stitch sewing head for the transversal cutting and sewing
Ability to adapt any multineedle quilter
Ability to work with pre-quilted material
Ability to set up timing of the looper-needle adjustment without any mechanical setting
Reliable OMRON Sysmac Controller
Ability to use as panel cutter only
Durable FESTO pneumatic system with low air consumption



Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA
Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4