Find Verified Tin Ore Suppliers, Manufacturers and Wholesalers

Hello

We are able to supply monthly 100,000 MT of Aluminum Bauxite,
Silicon Oxide as well as other minerals included.

We work on a FOB/CIF basis. The product is situated close to Iskenderun
port in Turkey.

We are okay with visits to check sites and material for confirmation
once this is done, then we can sign an annual contract.

Specifications:

45.5%Min - 51% Al203
3% Min -max 7% SiO2
5% min - max 8% TiO2

Minimum Order Quantity is 55,000Ton

The CFR rate is $95/ Ton

Payment term : LC at site with payment at loading portin Turkiye or Guinea.

LC at Destination Port ONLY for Chinese ports


Thanks and we hope to read from you.

Our Lumpy chrome ore is of 44% Cr2O3 and 13.5% Fe. A 2.25 ratio. This is the lowest percentage as we have tests that put out chrome up to 49.6%. Our pricing is according to 44% Cr2O3.
Si is 10% and Sulfur content is 0.07%
We have 25,000 Tons ready to be shipped.

Dear buyer,

Thanks for the interest in our Boron product.
The supply can be done on a consistent basis.

Product: Boron( Boron element , Boron minerals)
Origin: Turkey
Seller: Turkish Government

Known boron deposits in Turkey which possesses 73%
of world boron reserves; Eski�?ehir â?? K�±rka, K�¼tahya-
Emet, Bal�±kesir â?? Band�±rma and Bigadi�§.

With the Law No. 2840, the task of producing, operating
and marketing boron and boron products in Turkey is carried
out by Eti Maden fully supervised by the Government of Turkey.

We are ONLY facilitators for the entire process to getting product and not owners nor exporters or sellers.

Face to Face Meeting is acceptable for negotiations.

Kindly revert if serious and interested

We offer to you good quality Zeolite Specifications:

Chemical Name : Calcium, Potassium, Sodium, Aluminosilicate
Chemical Family : Natural Zeolite
Chemical Abstract Name : Clinoptilolite
Chemical Formula : (Ca,K2,Na2,Mg)4Al8Si40O96.24H2O

Mineral Details:

Clinoptilolite 88 - 97 % Cristobalite 0.5 % Tridymit : 0 - 5 %

Chemical Details :

SiO2 62,81 70,77 %
Fe2O3 0,91 3,78 %
Al2O3 10 ,22 13,62 % MgO 1,43 3,12 %
CaO 2,71 5,08 % Na2O 0,10 0,49 %
K2O 2,11 3,83 % TiO2 0,05 0,92 %

Acid B (ppm) 81 116% Water B (ppm) 40 55 %

PHYSICAL DETAILS :

Appearance : Ivory white Solubility : None
Smell : None pH 6,80 7,2
Porosity 24-32 % Single point Surface Area 13,9m2/g
Hardness 1,5-2,5 Mohs Effective Diameter of pores 0,4 nm
Mudding Down None Softening point : 1260 C
Water Absorption 34 36 % Melting point 1506 C
Bulk Density 0,82-0,85 g/cm3

CATION EXCHANGE CAPACITY (CEC) 1,5 2,1 meq/g

Maj exc. Cations : Rb, Li, K, Cs, NH4, Na, Ca, Ag, Cd, Pb, Zn, Ba, Sr, Cu, Hg, Mg, Fe, Co, Al, Cr.
Selectivity : Cs+ > NH4+ > Pb2+ > K+ > Na+ > Ca2+ > Mg2+ > Ba2+ > Cu2+, Zn2+
Primary Adsorbing Gases :
O2, SO2, H2S, NH3, HCHO, Ar, O2, N2, H2O, He, H2, Kr, Xe, Ch2OH

For your inquiry please contact us.

We offer good quality zeolite to you .

Please for information contact us.

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

99.9 % grade, high purity, has been tested and approved by leading industrial buyers, now open to export markets for your requirements.

Granules/capsules can be used more productively and efficiently in your process management since its much lower energy consumption during integration.

Our exclusive manufacturer client is producing powder metals for various industrial applications most notably 3D printers and augmented manufacturing. The exceptional product portfolio is tested and approved by leading corporate buyers in Turkey and now we are going global. Our partner excells the highest standards during production and achieves the best quality at water atomization and VIGA (Vacuum Induction Gas Atomization) techniques both.

Some of the final products for your requirements are as follows: Copper (Cu), bronze (85/15, 90/10), stainless powders (304, 316L), tin (Sn), aluminum (Al), zinc (Zn), Al12Si / AlSi10Mg.

Contact us for more details.

Bauxite is a sedimentary rock with a relatively high aluminium content. It is the world's main source of aluminium and gallium. Bauxite consists mostly of the aluminium minerals gibbsite (Al(OH)3), boehmite (Y-AlO(OH)) and diaspore (�±-AlO(OH)), mixed with the two iron oxides goethite (FeO(OH)) and haematite (Fe2O3), the aluminium clay mineral kaolinite (Al2Si2O5(OH)4) and small amounts of anatase (TiO2) and ilmenite (FeTiO3 or FeO.TiO2).[1] Bauxite appears dull in luster and is reddish-brown, white, or tan.Bauxite is usually strip mined because it is almost always found near the surface of the terrain, with little or no overburden. As of 2010, approximately 70% to 80% of the world's dry bauxite production is processed first into alumina and then into aluminium by electrolysis.[9] Bauxite rocks are typically classified according to their intended commercial application: metallurgical, abrasive, cement, chemical, and refractory.

PRS-A0500/E Sand Equivalent Test Set, EN Model

PRS-A0500/A Sand Equivalent Test Set, ASTM Model

PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN

PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM

PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm

PRS-A0506 Sand Equivalent Siphon Assembly

PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN

PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM

PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt

The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler.

PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately.

The Sand Equivalent Test Set is supplied complete with;

â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A,

â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E,

â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube,

â?¢ Plastic can - 5 lt.

â?¢ Weighted Foot Assembly,

â?¢ Measuring Tin,

â?¢ Wide-Mouth Funnel,

â?¢ Ruler,

â?¢ Special Carrying Case,

Dimensions 400x550x150 mm

Weight (approx.) 4,6 kg

PRS-ZE0180 : Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz

PRS-ZE0180/110 : Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz

PRS-ZE0182 : Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel

PRS-ZE0183 : Cone Test Gauge for PRS-ZE0182

PRS-ZE0184 : Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel

PRS-ZE0185 : Cone Test Gauge for PRS-ZE0184

PRSGH-1425 : Moisture Content Tin with Lid Ã?:55 mm x h:35 mm, Aluminum

PRSGH-1435 : Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum

A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength.
The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit.

The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test.

Semi-Automatic Penetrometer for Liquid Limit supplied complete with;
Automatic Penetration Timer Unit,
30° Penetration Cone
Sample Cups, 3 pcs. Aluminium, Ã?55 mm x h:35 mm.

42%-44% concentrated chrome:
Cr2o3 :44%-46%
Sio : 4%-7%
Size : 40mm-300mm
Qantity :1500-1800 tons.

In Turkey/Hatay

Hello everyone. we are removing hematite iron ore in Mersin / Turkey. This is a new field. We got all their legal permissions. The area is very close to Turkey / Mersin sea port in Mediterranean. It is in a hot area. Iron can be removed for 12 months. Total ore is 360,000 tons, our target is 30,000 tons per month. iron tenor above 55%. If you contact me, I can send test reports. Respects

We will remove the Hematite Iron Ore in Turkey / Mersin / Anamur. There will be no intermediaries in this business. we are targeting 25.000 Tons per month. total 300.000 tons. our place is close to the Mersin sea port. Mersin is a hot region. We can extract it for 12 months. average 60% tenor.

Product Code : Product Description

PRSG-0420 High Capacity Screen Shaker Time-Controlled, 220-240 V 50-60 Hz

PRSG-0420/110 High Capacity Screen Shaker Time-Controlled, 110 V 60 Hz

PRSG-0422 High Capacity Screen Shaker Frequency & Time-Controlled, 220-240 V 50-60 Hz
PRSG-0422/110 High Capacity Screen Shaker, Frequency and Time-Controlled, 110 V 60 Hz

PRSG-0425 Pan

PRSG-0426 Soundproof Safety Cabinet

STANDARDS : EN 1339, 1367-1; TS 2824
The PRSG-0420 and PRSG-0422 are ideal for sizing large quantities of crushed stones, sand, gravel, slag, coal, coke, ores, pellets and similar materials. The screen shaker has a capacity of approx. 30 kg of sample. To be use with 667x452x67 mm dimension screens. The shaker has 6 screens and 1 pan capacity.
PRSG-0420 model is time-controlled, PRSG-0422 model is frequency and time-controlled.
Various sized wowen wired from 100 mm (4â?�) to 4 mm (no.5) or perforated plate from125mm to 5.6mm screen trays are available on request.
PRSG-0426 Soundproof Safety Cabinet is manufactured from sheet steel lined internally with soundproofing material to reduce noise and for protection from dust.
Screen trays and Soundproof Safety Cabinet (PRSG-0426) should be ordered separately.
The PRSG-0420 or PRSG-0422 is supplied complete with;
â?¢ Pan (PRSG-0425)

Woven Wire Cloth Screen Trays ASTM E11 Perforated Plate Screen Trays
Product Code Aperture mm (in) Product Code Aperture mm (in)
PRSG-8WC1000 100 mm (4 in) PRSG -8PC0056 5.6
PRSG-8WC0900 90 mm (3 ½ in) PRSG -8PC0080 8
PRSG-8WC0750 75 mm (3 in) PRSG -8PC0112 11.2
PRSG-8WC0630 50 mm (2 in) PRSG -8PC0160 16
PRSG-8WC0500 45 mm (1 ¾ in) PRSG -8PC0224 22.4
PRSG-8WC0450 37.5 mm (1 ½ in) PRSG -8PC0315 31.5
PRSG-8WC0375 31.5 mm (1 ¼ in) PRSG -8PC0450 45
PRSG -8WC0315 25 mm (1 in) PRSG -8PC0630 63
PRSG -8WC0250 22.4 mm (7/8 in) PRSG -8PC1250 90
PRSG -8WC0190 19 mm (¾ in) 125
PRSG -8WC0160 16 mm (5/8 in)
PRSG -8WC0125 12.5 mm (½ in)
PRSG -8WC0112 11.2 mm (7/16 in)
PRSG -8WC0095 9.5 mm (3/8 in)
PRSG -8WC0080 8 mm (5/16 in)
PRSG -8WC0063 6.3 mm (¼ in)
PRSG -8WC0056 5.6 mm (No. 3 ½ in)
PRSG -8WC0047 4.75 mm (No. 4 in)
PRSG -8WC0040 4 mm (No. 5 in)

SCREEN SHAKER
Dimension 587x787x850 mm
Weight (approx.) 170 kg
Power 550 W

SCREEN TRAYS
Dimensions 667x452x67 mm
Weight (approx.) 7 kg

We are directly mine Coltan Tantalum Niobium. High quality.

Black whole olive, sliced olive

In jar or tins

Green whole olive, stuffed olive, sliced olive

In jar or tin