Find Verified Solar Lighting Kit Suppliers, Manufacturers and Wholesalers

Product Code Product Description

PRS-ZE0080 Field Inspection Testing Kit

PRS-ZE0082 Field Inspection Pocket Vane Tester

PRS-ZE0082/1 Extension Rod for PRS-ZE0082

PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

STANDARDS : ASTM D2573

The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case.

PRS-ZE0080 Field Inspection Testing Kit

Dimensions (packed) 240x210x50 mm

Weigth (approx.) 1.8 kg

The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately.

PRS-ZE0082 Field Inspections Pocket Vane Tester

Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm

Measuring Range 0 to 240 kPa (0-24 N/cm')

Torque Value 5 N - m

Extension Rod 500 mm depth.

Overall Dimensions (assembled) 310x105 mm

Weight 1.3 kg

The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case.

PRS-ZE0084 Heavy Duty Pocket Penetrometer

Measuring Range 0 to 10 kgf/cm'

Dimensions (assembled) 210 mm length x 20 mm dia.

Weight (approx.) 0.5 kg

Product Code Product Description

PRS-CM0010 Le Chatelier Mould

PRS-CM0014 Le Chatelier Soundness Kit

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (PRS-CM0016) according to the relevant standard.

The Le Chatelier Soundness Kit is supplied complete with;
Le Chatelier moulds 3 pcs.
50x50 mm glass plates 6 pcs.
300 gr Weights 1 pcs.
100 gr Weight, 3 pcs.
Tamping Rod 17 mm dia. x 70 gr
Steel Ruler
Plastic Carrying Case

Dimensions 340x290x80 mm

Weight (approx.) 2 kg

3D infinity mirror
16 million color options
mobile control
touch control
sound and music sensitive easy installation

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

Product General Features
Drilling center, fixed column, movable worktable structure. Complex workpieces that require milling, drilling, drilling, reaming and countersinking can be completed in a single assembly. It is widely used in electronics and vehicle parts industries.

Product General Features
Drilling center, fixed column, movable worktable structure. Complex workpieces that require milling, drilling, drilling, reaming and countersinking can be completed in a single assembly. It is widely used in electronics and vehicle parts industries.

For details contact us .

Barrel seating group - barrel seat


The sitting group made of barrels

It is protected with long-lasting synthetic machine paint that is resistant to UV and sun rays.

The fabrics on it are water-repellent, stain-proof, durable, and permanently stitched leather. It is comfortable to sit on.

Sponge thickness is 8 cm fabricated CNC cut 27 density sponge.
In our products, the floor is scratch-proof.

Origin / Turkiye
prince / 550 $ - 800 $
minimum order 10 sets
The packaging image is attached.

Sitting group made of barrels

It is protective with long-lasting synthetic machine paint that is resistant to UV and sun rays.

The fabrics on it are water-repellent, stain-proof, durable, permanently stitched leather. It is comfortable to sit on.

Sponge thickness is 8 cm fabricated cnc cut 27 density sponge.
In our products, the floor is scratch-proof.

Maximum Engine Power (Stand-By) 25 kVA
Maximum Engine Power (Prime) 22 kVA
Voltage 230/400 V
Light Power 4x1000 W
Total Light Power 4000 W
Brightness Level 30400 (5 Lumen/m2)
Auxiliary Car Plugs 2 x 220 V - 380 V
Tower Rise Capacity 9000 mm.
Rotation Capacity 360 Angle
Tower Movement System Hydrolic
Slope Angle <10
Wind Resilience Rate 80 km/h

Vein Depth Setting
Skin Color Setting
Intensity Adjustable White Light
5 Different Projection Size Adjustment
6 Different Vein Color Adjustment
3.5'' TouchScreen for Easy Adjustment

Colour: Light red/pink
Size: 1mm-3mm
Purity: 25Kg/ 50Kg/ Big Bag
HS-Code: 2501.00
Source: Pakistan
Production Stages: None refined/Washed/Oven-dried

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.)
â?¢ Choosing the compression or flexure frame by using the changeover valve.
â?¢ Pressing the START button on the control unit.
â?¢ The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
â?¢ Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

Colour: Light red/pink
Size: 0.3mm-1mm
Purity: 97%
Package Terms: 25Kg /50Kg/ Big Bag
HS-Code: 2501.00
Source: Pakistan
Production Stages: None refined/Washed/Oven-dried

Microscope For Cracks On Concrete

Product Code Product Description
PRS-BCM Microscope For Cracks On Concrete

It is used for determining the cracks on concrete; Adjustable lighting system
Sensitive measurement ( 10 mm / 0.001 mm )
Focusing system

Neutral cure high performance silicone adhesive designed for bonding mirrors. Does not attack mirror backings.Odorless. Non corrosive. Excellent wheather ability in direct sun light, rain, snow and ozone. Solvent free %100 silicone. For bonding mirrors to substrates like wood, stone, concrete, gypsum, plasterboard, tiles, steel and aluminium.

Neutral cure high performance silicone sealant designed for a wide range of building and construction joints. Excellent primesless adhesion to numerous porous and non-porous substrates. Noncorrosive. Excellent wheather ability in direct sun light, rain, snow and ozone. Fast curing. Low modulus, high elasticity. %100 Silicone. Very Iow odour. Building and construction joints. Wheatherseal applications. Expansion and joint sealant in precast concrete, wood, aluminum and pvc windows.

The art of miniatures does not have light and dark effects and depth and thus developed different than western art of painting. The art of miniatures is usually found in manuscripts of history and literature. Istanbul has always been the most important center for this art supported by the palace. Miniatures continued their progress until the westernizing period, which started in the 18th century and declined in importance as the classical western painting spread. Today, the miniatures are considered to have a documentary significance beside their artistic values and selected examples are displayed at museums.

Product Code : Product Description

PRS-A0810 : Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz

PRS-A0812 : Corn Emery 5 kg, for PRS-A0810

PRS-A0813 : Flour Emery 5 kg, for PRS-A0810

PRS-A0814 : Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60
PRS-A0815 : Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65


Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.
Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
Road Wheel,
Side Plate,
Rubber Rings,
Solid Rubber- Tired Wheel - 2 units,
Drive Belt,
Abrasive Feed Mechanism,
Corn Emery - 5 kg,
Flour Emery - 5 kg,
Tool Kit,
Specimen Moulds - 2 pcs,
2 Mould Plates


Road Wheel Speed 315 to 325 r.p.m

Dimensions 740x720x1520 mm

Weight (approx.) 175 kg

Power 850 W

Solar panel installation u profile, angled u profile, c profile, c profile plus, z sigma ,omega, l proile, diamond, diamond x, m prolile, 2 z profile

Offers turnkey facility setup to be able to accomplish successful solar energy projects, system design, material supply, field setup, operating and maintanence.
We offer you GES energy scada, automation system solutions to be able keep track of solar power plants, to save the data, to control them.
We works with leading local and international producers, providing solar energy mid voltage system cells and kiosks. We provide turnkey solutions about mid voltage cells and related concrete kiosks and provision distribution, setup and start ups.
we provides solutions for low voltage switch system in Solar power plant, using ABB,
ArTu, EAE, OR AGES panels. We take consideration criterias such as bus and cable edges, short circuit resistance capacity, heating value while we are designing panels that have ABB Quality and assurance.

We are manufacturing the poles used in lighting main roads, streets, parks, gardens in compliance with TS 914-ISO 9002 standards. Lighting poles are coated by at least 70 -80 micron galvanic in the zinc bath by hot-dipping method. We are carrying out our manufacturing as a result of static calculations by taking the height of the lighting poles, cantilever lengths, basic anchoring and the armatures installed above them into account.

For highway, road, school, park, street, etc.

Product Code Product Description

PRS-ASFP00129 Asphalt Flash Point Apparatus

STANDARDS : BS 4689, ASTM D92, AASHTO T48, UNI4160, IP 36/67, UNE 7075, EN 22592, NFT60-118, CNR N0 72

It is used to determine the â??open-cupâ?�, flash and fire points of oil products with a flash point above 80°C.

Calibrated cup. Gas or liquid gas lighting device above the cup. 550 W electric thermostatic heater.

Power supply 220-240 V 1ph 50 Hz 550 W

Dimensions 220 x 220 x 450 (h) mm.

Weight 11 Kg

Hello Sir/Mam

Thanks for the interest in our Crude oil product
We are able to supply you on a consistent basis

Origin Available

1 Iran
2 Kazakhstan

Payment Terms DLC SBLC BG Sblc via MT760 TT MT103

Specification of Iran light crude oil certificate of origin changeable

CHARACTERISTICS UNITS RESULT TEST METHOD


Specific Gravity1556 1556 08568 ASTM D5002
API Gravity API 336 ASTM D5002
Sulfur Content total Wt 146 ASTM D4294
HS Content ppm 86 IP 570
Mercaptan Content ppm 60 UOP 163
Nitrogen Content total Wt 0l3 ASTM D5762
Water Sediment Vol

Please see our catalog on our website.

emergency direction luminaries and sensors(please contact for details)

6060002459, 3128259846, 3128259218, 9121701750, 9121667650, 9121704550, 9121598750, 3115347390, 3115188090, 3128209144, 3217983446, 3128259258, 9121591350, 3128312566, 9120099305, 5537193100, 3128259405, 6060012533, 3128321936, 6060012524, 9121669650, 3115101093, 9120099313, 3115917091, 9120099007, 3128259254, 9120099306, 6060012533, 6060001838, 3115915099, 3128259405

It is the components which allows the car to switch from fuel to gas. It is also showing the reserve level. There is a buzzer inside the component for sound warnings.

All of our products have 2 years of warranty and 7/24 of online service.

It is manufactured according to the ECR 67-01 standards. It lets the gas inside the tank to enter or exit for storage or usage purposes. By its coiled structure, it cuts the gas from the tank when the car is stopped. It is designed by using European Orings. Moreover, the multivalve ball is an imported part.

All of our products have 2 years of warranty and 7/24 of online service.

This product enables the LPG to be filtered and its design allows the inside material to be changable. It needs to be renewed every 20,000 KMs. It is important to filter undesired materials in order to get a better performance.

All of our products have 2 years of warranty and 7/24 of online service.

chandelier and lighting appliances

any type

That is very special material for your projects.

Cut to size also available.

Please contact to us any further information.

2 cm polished slab 32,50 Usd/m2 Fob Gemlik port Turkey

Power, W27W
Housing Material Cast Aluminum
Voltage, V AC 12-24 VDC.
Efficiency, Lm/1W122
LED Quantity22
LED Type,Cree Led USA made
LED Beam Angle, 120
Color Temperature, °K6000-7000 K
Led Life50000 hours
Protecting Rating IP 66
Degree of ProtectionIK08 EN 62262
BatteryDC 12Volt / 40 Ah
Solar Panel 60W. Mono/Poly
Charge ControllerDC 12V/10Ah
Battery box1 pc
Bracket for Holder Panel1 pc
Working Temperature, °C -40 ... +70
Weight, kg6,0
Light ColorOptional
Led BoardAluminum PCB
Working Humidity10% -90%RH
Cable 1mt
Diffuser Anti-UV temp.glass
Warranty (month)36



international

Power, watt40w
Housing material Cast aluminum
en 62262

Light colorOptional
Led boardAluminum pcb
Working humidity10% -90%rh
Cable 1mt
DiffuserAnti-uv temp.Glass


Int.Standart

Power, Watt40W
Housing Material Cast Aluminum
Voltage, V AC12-24 VDC.
Efficiency, Lm/1W122
LED Quantity36
LED Type,Cree Led USA made
LED Beam Angle,120
Color Temperature, °K6000-7000 K
Led Life50000 hours
Protecting Rating IP 66
Degree of ProtectionIK08 EN 62262
BatteryDC 12Volt / 80Ah
Solar panel 1x90W.Mono/Poly
Charge ControllerDC 12V/15Ah
Battery box1 pcs
Brackets for Holder Panel2 pcs
Working Temperature, °C -40 ... +70
Weight, kg6,0
Light ColorOptional
Led BoardAluminum PCB
Working Humidity10% -90%RH
Cable 1mt
DiffuserAnti-UV temp.glass
Warranty (month)36


international

(i-1), (i-2), (i-3), (i-4) types industrial high power led lights
Save energy : %60-70
Housing : aluminum
Led type :
Type (i–1) : 1pc.Led. 50w. Industrial type high power led.
Type (i–2) : 40pc.Led.100w. Industrial type high power led.
Type (i–3) : 40pc.Led.120w. Industrial type high power led.
Type (i–4) : 40pc.Led.150w. Industrial type high power led.
Led life : 50.000 hours.Industrial type high power led.
Led color : hot white, cool white, natural white.
Working temperature : -30° / +70°c
Dimensions :
Diameter : 420mm.
Height : 300mm.
Optik : aluminum reflector
Input voltage : 110-220v. Ac./50hz.
Power : 50w–100w-120w-150w
Lumen :
Type(i-1) 1pc.Led 50w : 3.480lm. High power led
Type(i-2) 40pc.Led (100w): 8.000lm. High power led
Type(i-3) 40pc.Led (120w):10.000lm. High power led
Type(i-4) 40pc.Led (150w):12.000lm .High power led
Led board : aluminum pcb
High from ground :
Type(i-1) 50w : 3-4mt.
Type(i-2) 100w : 4-5mt.
Type(i-3) 120w : 5-6mt.
Type(i-4) 150w : 6-12mt.
Weight : 3-5 kg.



International

12w.(g–1) type led garden light
Save energy : %60-70
Housing : aluminum
Globe : transparent polymar material
Led type : high power led.
Led life : 50.000 hours.
Led color : warm white, cool white, natural white.
Working temperature : -30° - 70°c
Head dimensions
Diameter : 400mm.
Height : 380mm.
Input power : 110-220v.
Lumen :
1x12w. : 1440 lm. 12 led
Led board : aluminum pcb
Pole high : 2-3mt.
Weight : 3kg.
Pole : 2-3mt. Galvanized & aluminum pole, decorative design.
Application : plate fixed concrate with bolt.

Solar Panel 550W
144 HalfCut Cell
M10-10BB

Ramses autogas equipments, new SGI reducer for LPG sequential system. Ramses LPG-CNG conversion kits.

Type: Godzilla06 with coil (Type A) - Godzilla06 without coil (Type B)

It reduces the pressure of the gas coming out from the cars LPG tank to degraduate to the necessary level needed and at the same time, through the cycling of hot water inside the reducer, they provide the LPG to the switch completely to gas phase. The security coil helps to stop the gas. It works between 0-3 bars of pressure. Our reducers are two types as with coil and without coil. Both types include a filter inside which is very easy to change. Since it has tiny structure, it provides the chance to be installed very easily and the arms are metal, so, it does not get deformed.

All of our products have 2 years of warranty and 7/24 of online service.

The working principle of sequential systems are based on the pressure. Some of the information needs to be transferred to the electronic control system(ECU). These informations are provided by the sensors. When the information is converted to the mathematical data,then, the electronic control unit has the control over these information. At this point, the MAP Sensor measures the pressure values. It measures the reducer pressure together with inside pressure of manifold, exhibiting the delta pressure for adjusting tunning settings for the poor/rich mixture. It is also a piece which could sense the defect that can be caused by the decrease in the pressure or when the gas runs out, it switches to fuel. We have two types of MAP Sensors as version 1 and version 2.

All of our products have 2 years of warranty and 7/24 of online service.

It is manufactured according to the ECR 67-01 standards. There is also a drain plug which can evacuate the toxin wastes.

It is an electronic type carburetored reducer. It reduces the pressure of the gas coming out from the car's LPG tank to degraduate to the required level and at the same time, through the cycling of hot water inside the reducer, they provide the LPG to switch completely to gas phase. The security coil helps to stop the gas. It is manufactured according to the ECR 67-01 standards. There is also a drain plug which can evacuate the toxin wastes. It has an easy tunning and hard to detune structure.

All of our products have 2 years of warranty and 7/24 of online service.

150W. 4M.SAKA Series Led Street Led Luminaire Rated Voltage : 100-240 VAC & 50/60Hz
Power factor: 0,95
Electrical Efficiency: 90% Optical Efficiency: 90%
Protection Class: IP66
Led Type and Led Life: High Power Osram LED, Led Life (50000) hours. Color temperature: 3000-6500K
CRI %70,
FWHM: 140x60 Asymetrical Road Optics Design
Earth Index: Class I (Must be earthed)
Impact Resistance: IK 09
Lighting Housing: Aluminium Injection Body and Aluminium Extrusion Heat Sink Optical Structure and Driver housing is seperate, Luminaire Polyester Baked Paint 200C-RAL 9006
Refractor: IP 66 LENS Moduls
Efficiency; 110 - 130 lm/W
Electric Protection: Class I
Electrical Protection Sites: Over Current Over Voltage, Short Circuit, Termal - Breaker Protection.
Optical Lens: Bayer macrolon 2807 Optic Grade PC, 12/80/120/140x60 PC Lens
Optical Structure: Road Optics - 12 LEDs / Per Module
Standard: TSE 8700 EN 60598-2-3 ISO 9001, ISO 14001, OHSAS 18001, CE
Certification: Turkish Standard Institution ( Accredited Internationally )
Waight: 7kg.
Dimensions: 279x591x128mm.
Connection Components: All bolts, nuts, fittings are stainless steel,Inox.
Operation Temperatures: -30 / +60
Operation Humidity: 10% - 90%
Modular design: When a modul breakdown other moduls with led going on to Works.
Bracket Mounting Dia.: 43-60 mm
Application Areas: Road and Street Lighting

Hot Dip Galvanized High Mast Stadium Lighting Poles.

The FOAMCEM light weight cellular concrete is obtained mixing liquid cement grout, or sandcement grout, with the foam made from our foaming agent foamcem.By this system a structure of closed air bubbles is formed into the mix and this fact takes an high insulating power and lightness to the material.Foamcem technology allows, varying the foam-cement-sand ratio, to obtain light weight cellular concrete with a density from 300 to 1.600 kg/m3 according to requirements.


Packaging: metal drums 230 kg net weight.
Consumption: kg 1, 5-2 cubic meter of cellular concrete depending on the density produced.

Our products include:

Soda Ash Dense
Soda Ash Light

Our product is especially suited for High-End Applications including; Soap, Detergents, Paper, Textiles, Chemical manufacturing, Water treatment, Glass manufacturing,Cleaning product manufacturing and more.

Kit-valve inc. plate & fixing screw x1 - 459/M2874

JCB product numbers are reference purpose only.

Supplier of High Quality Soda Ash (Sodium Carbonate) Light and Dense from Turkey and Dubai

Industrial Uses
Glass Manufacturing :
Sodium Carbonate is a key ingredient in the production of glass. It helps reduce the melting temperature of silica, making the process more energy-efficient. It is used in the manufacturing of flat glass, container glass, and other glass products.
Detergents and Soaps :
Soda ash acts as a builder in detergents, enhancing the effectiveness of the surfactants by softening the water. It is also used in the production of soap.
Water Treatment :
Soda ash is used to adjust the pH of water, making it less acidic. This is important in municipal water treatment plants and for maintaining the balance in swimming pools.
Pulp and Paper Industry :
Used in the pulping process to separate cellulose fibers and as a bleaching agent in paper production.
Chemical Manufacturing :
Soda ash is a raw material for the production of numerous chemicals, including sodium bicarbonate (baking soda), sodium silicate, sodium tripolyphosphate, and others.
Textile Processing :
Used in the dyeing and processing of cotton and other fabrics, soda ash helps to fix dyes to fibers and adjust pH levels in textile processes.
Metal Refining :
Soda ash is used in the extraction of metals such as copper, zinc, and lead from their ores.
Food Industry :
Used as a food additive (E500) to regulate acidity and as a leavening agent in baking.

Packing of Soda Ash Light and Dense
1250kg Jumbo bag
50kg bag

BMW F39 X2 LED Tail Light Set (Left & Right) OEM Part Number 63217420737. Compatible with selected BMW X2 F39 models. Designed to provide excellent visibility, enhanced safety and a modern OEM appearance. Manufactured to OEM specifications for durability, long service life and precise fitment. Suitable for replacement and maintenance applications. OEM and genuine quality parts available. Worldwide shipping from Turkey.

OEM Number: 63217420737