Find Verified Motor Scrap Suppliers, Manufacturers and Wholesalers

Structure Size : 160
Rated Power : 1.25 - 6 kW
Pole Number : 16 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : A4 - B3 - B9
Mechanical Structure : Body cast iron
Cooling Type : IC 410 (Cooling by forced cooling fan)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S3 - S5
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : On request, a thermistor can be installed and a motor protection relay can be provided.

Structure Size : 90 - 200 (Contact us for different types of needs.)
Rated Power : 0.55 - 30 kW
Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16
Protection Class : IP55 (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, Legs are ductile iron.
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 132 to 200
Rated Moment : Up to 400 Nm
Pole Number: 4 - 6
Protection Class : IP55
Rated Voltage : Up to 1000 V
Frequency -
Build Type : Flanged
Mechanical Structure : Cast iron body and ductile iron cover
Cooling Type -
Insulation Class : H
Working Regime : S2
Ambient temperature -
Motor Protection : Thermal protection with PTC
R&D support : KOSGEB / R&D and Innovation Support Program

Mass production support: Ankara Development Agency / Export Focused Development Program in Advanced Technologies with TR51 / 14 / aLTEK / 0070 project number

Structure Size : 80-200
Rated Power : 0.20 -15 kW
Pole Number : 2 - 4 - 6 -10
Protection Class : IP55
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies.)
Build Type : Foot
Mechanical Structure : Body, caps and feet ductile iron
Cooling Type : IC 410 (Uncooled)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S1
Ambient temperature : 40 C
Motor Protection : Thermistor and motor protection relay for 132 Type and above (Applicable to smaller types.)

Structure Size : 132-315
Rated Power : 2.2-160 kW
Pole Number : 4 - 6 - 8
Protection Class : IP55
Voltage : 380 V
Frequency : 50 Hz
Build Type : B3 - B5 - B3 / B5
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411
Insulation Class : A - E - B - F - H
Working Regime : S3- 100-60-40-25%
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 225 - 355
Rated Power : 45 - 315 kW
Pole Number : 2 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : It is supplied by the air that the propeller at the back of the engine circulates inside the body. (Internal Cooling)
Insulation Class : F / H
Working Regime : S1
Ambient temperature : 40 C
Motor Protection : Thermistor and Motor Protection Relay

Product Code Product Description

PRS-ZE0200 Manual Liquid Limit Device (Casagrande),BS

PRS-ZE0202 Manual Liquid Limit Device (Casagrande), ASTM - AASHTO

PRS-ZE0210 Motorized Liquid Limit Device (Casagrande), BS, 220-240 V 50-60 Hz

PRS-ZE0212 Motorized Liquid Limit Device (Casagrande),ASTM â??AASHTO 220-240 V 50-60 Hz

PRS-ZE0215 Metal Grooving Tool and Gauge Block, ASTM

PRS-ZE0216 Plastic Grooving Tool, ASTM

PRS-ZE0217 Plastic Grooving Tool, BS

PRS-ZE0218 Brass Grooving Tool, AASHTO

PRS-ZE0220 Resilience (Rebound) Tester, ASTM

PRS-ZE0221 Resilience (Rebound) Tester, TS 1900-1; AASHTO

PRS-ZE0225 Spare Brass Cup, for all Models

STANDARDS : ASTM D4318; BS 1377:2; AASHTO T89; TS 1900-1

The PARSROS Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state.
The Devices consist of an adjustable crank and cam mechanism, a blow counter and a removable brass cup fitted on the base. Different models with the same shape but with different base and cup weights are available according to the required specifications. Manual and Motorized versions are available.

PRS-ZE0200 and PRS-ZE0200 models are supplied with a BS type plastic grooving tool.

PRS-ZE0202 and PRS-ZE0212 models are supplied with a ASTM type plastic grooving tool.

Other types of grooving tools should be ordered separately.

Product Model Manual Motorized

Dimensions 240x230x150 mm 200x290x170 mm

Weight (approx.) 2 kg 4.2 kg

Structure Size : 90 - 355
Rated Power : 0.37 / 1.66 30/37 kW
Pole Number : 16 / 4-12 / 4-16 / 6-8 / 4-6 / 4-12 / 6-16 / 2-4 / 2
Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F / H (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 58-63-74-81-93 / MR65-MR71-MR-80/112
Rated Power : 1.1-7.5 kW
Pole Number : 2 - 4
Protection Class : IP55
Voltage : 380 V
Frequency : 50 Hz
Build Type : B3
Mechanical Structure : Aluminum or Iron Body
Cooling Type : IC 411
Insulation Class : F
Working Regime : S1, S6- 40%
Ambient temperature : 40 C
Motor Protection -

Structure Size : 90 - 355
Rated Power : 0.55 - 400 kW
Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16
Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F / H (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 100 - 315
Rated Power : 3 - 370 kW / 4 - 503 HP
Pole Number : 2 - 4
Protection Class : Please contact for IP23 (TS3209 EN60034-5) -IP55.
Voltage : 380V (500V or contact us for different voltages.)
Frequency : 50 Hz (60 Hz or contact us for different frequencies.)
Build Type -
Mechanical Structure : Steel Body, cast iron covers
Cooling Type : Internally cooled / TEFC
Insulation Class : F / H
Working Regime : S1
Ambient temperature : 40 C
Motor Protection : Thermistor and Phase Protection Relay

Tank top Screw Type Compressors
Compact design, advanced technology
High quality, dry air due to integrated dryer
Highest performance level with the most convenient investment cost
Affordable service cost and maintenance easiness
Uninterrupted production with high quality air
Easy installation and minimum fixing cost
Low noise level & silent operation
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

HMS scrap
HMS 1&2

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Highest efficiency level.
Lowest energy consumption for applications with need for continuous air flow.
Long lived operation system provided by reciprocal coupling.
Efficient transfer system due to elastic coupling
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Direct coupling drive.
Silent and vibration free operation due to polyurethane coupling.
One- to- one (1:1) direct coupling.
Star triangulation starter system.
PLC control unit
Radiator with tropical type of air- oil combination. Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency. Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

PRS-ASTH1322 Asphalt Mixer

STANDARDS : ASTM C109, C305 / AASHTO T106, T162 / EN 196-1, 196-3:2005, 413-2, 459-2, 480-

This 5 litre capacity mixer has been designed to mix bituminous samples for compaction tests and for other tests where uniformity is required. Thanks to the planetary action this mixer ensures a complete and uniform mixing. The machine is provided with a variable speed drive allowing to set different speeds.
The plastic cover can be lifted to inspect the boxl, and in this case the motor automatically turns off to prevent accidents to CE safety Directive.

The mixer is supplied complete with hook beater and stainless steel bowl, but without the insomantle electric heater that must be ordered separately.

Dimensions 260 x 760 x 860 mm

Power supply 400 V 50 Hz 3 ph 0,5 HP (230V 1 ph on request )
Weight 160 Kg

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Product Code Product Description

PRS-CM0090 Jolting Table, EN, 220-240 V 50 Hz, (60 Hz version is available upon request)

PRS-CM0091 Jolting Table with Soundproof Safety Cabinet, EN, 220-240 V 50 Hz

PRS-CM0092 Three Gang Mould for 40x40x160 mm

PRS-CM0093 Feed Hopper 40x40x160 mm for PRS-CM0092

PRS-CM0094 Short and Long Spreaders and Straightedge, for PRS-CM0092

STANDARDS : EN 196-1; ISO 679
Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height is 15 mm conforming to EN 196-1. The machine is equipped with a counter which provides automatic shut off at end of preset drop numbers.

Weight and dimensions of the jolting table fully comply with the requirements of EN 196-1 standard. When used with PRS-CM0092 Three Gang Mould and PRS-CM0093 Feed Hopper, the total weight of the moving part is 20 kg ± 0.5 kg. Without PRS-CM0092 and PRS-CM0093 the weight of the moving parts is 6.85 kg. Rapid mould lock and release system allows easy and quick operation.

The supporting frame of the machine has been designed to ensure precise dimensions, table flatness, correct centering of the three gang mould on the table.

The motor and gearbox assembly is enclosed in a protective housing, which promotes user safety (the moving parts are inaccessible) and long life for the gearbox.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

PRS-CM0093 Feed Hopper is used for filling PRS-CM0092 Three Gang Moulds placed on the Jolting Table.

PRS-CM0092 Three Gang Mould, PRS-CM0093 Feed Hopper, PRS-CM0094 Short and Long Spreaders and Straightedge should be ordered separately.

Product Code PRS-CM0090 PRS-CM0091

Dimensions 1050x350x500 mm 1440Ã?500Ã?575 mm

Weight (approx.) 55 kg 125 kg

Motor Speed 60 r.p.m

Drop Height 15 mm

Power 250 W

Product Code Product Description

PRS-KA0800 Slake Durability Apparatus, 220-240 V 50 Hz

PRS-KA0802 Pair of Mesh Drums for PRS-KA0800

STANDARDS : ASTM D4644

This test method has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion.

Slake durability is a simulated weathering test to determine abrasion resistance during wetting and drying cycles of shale and similar soft rocks as used in embankments and other construction-related applications. Samples are alternately tumbled in mesh drums through a water medium and oven-dried for two cycles. The percent loss of mass is referred to as the slake durability index.

The PRS-KA0800 Slake Durability Apparatus consists of a motorized drive unit which is mounted on a baseplate and which can rotate two or four drums at a speed of 20 r.p.m. The tank assemblies are filled with water to a level 20 mm below the drum axis. The test drums are manufactured from 2.00 mm mesh, 140 mm dia. x 100 mm long.

Dimensions 1300x150x450 mm
Weigth (approx.) 15 kg

Copper wire scrap 99.9%
We could supply the copper scrap with high quality and competitive price.
1) our copper scrap includes wires, tubes, and plates, etc.
2)the size is chips or other.
3) copper content could meet customers need.
Application:
Electrical, light industry, machinery, national defense industry .
Copper scrap is industry a important sources of the raw materials, all kinds of can be recycled recycling waste production with copper
Name
Copper scrap wire (millberry) 99.78%
A nalysis result
Item
S t a ndard(%)
Results(%)
Purity (wt%)
Â?¥99.78
99.9%
Carbon
0.03%
0.03%
Coblet

The company is the well-known exporter and supplier of high quality copper scrap procured from trusted sources. Our copper scrap is widely in demand as it contains 99.9% of copper along with lead, bismuth and some minor impurities. We are capable of undertaking bulk orders and deliver the same within the stipulated time frame. Furthermore, our copper scrap is reasonable priced.

Specifications :
Element copper 99.90% (min)
Lead 0.005% (max)
Bismuth 0.03% (max)
Total impurities 0.03% (max)
Excluding ag & oxygen
Standard confirming to - (c11000(etp) content 99.90%)

COPPER SCRAP MILLBERRY '' Cu 99.78 - 99.99%''
ORIGIN : CONGO - KENYA - ZAMBIA - NIGERIA
PAYMENT : SBLC
DELIVERY : CIF - ASWP

Product Code : Product Description

PRS-A0810 : Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz

PRS-A0812 : Corn Emery 5 kg, for PRS-A0810

PRS-A0813 : Flour Emery 5 kg, for PRS-A0810

PRS-A0814 : Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60
PRS-A0815 : Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65


Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.
Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
Road Wheel,
Side Plate,
Rubber Rings,
Solid Rubber- Tired Wheel - 2 units,
Drive Belt,
Abrasive Feed Mechanism,
Corn Emery - 5 kg,
Flour Emery - 5 kg,
Tool Kit,
Specimen Moulds - 2 pcs,
2 Mould Plates


Road Wheel Speed 315 to 325 r.p.m

Dimensions 740x720x1520 mm

Weight (approx.) 175 kg

Power 850 W

Product Code Product Description

PRS-AS0030 Centrifuge Extractor 1500 g, 220-240 V 50-60 Hz

PRS-AS0030/110 Centrifuge Extractor 1500 g, 110 V 60 Hz

PRS-AS0031 Filter Paper 250 mm Outer dia. 45 mm Inner dia. for PRS-AS0030 (100 pcs / Pack)

PRS-AS0032 Rotating Bowl and Cover for PRS-AS0030

PRS-AS0035 Centrifuge Extractor 3000 g capacity, 220-240 V 50-60 Hz

PRS-AS0035/110 Centrifuge Extractor 3000 g capacity, 110 V 60 Hz

PRS-AS0036 Filter Paper 295 mm Outer dia. 45 mm Inner dia. for PRS-AS0035 (100 pcs / Pack)

PRS-AS0037 Rotating Bowl and Cover for PRS-AS0035

STANDARDS : EN 12697-1 Clause B.1.5; AASHTO T164 A; ASTM D2172 A
The Centrifuges are used for the determination of the bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined rotor bowl housed in a cylindrical aluminum box. The bowl is driven by an electric motor fitted with an AC drive (inverter) with the double function of speed control up to 3600 rpm regardless of the frequency (50 or 60 Hz) and electrical breaking. The centrifuge can be set for the automatic speed ramp up to 3600 rpm and will stop in 10-15 seconds.

The cover is precisely machined and fitted with a solvent resistant gasket to avoid leakages.
The control panel includes: Start/Stop button and speed control knob.

The Centrifuge Extractor is supplied complete with;
â?¢ Bowl and Cover,
â?¢ Filter Paper - 100 pcs.

Dimensions 450x650x550 mm
Weight (approx.) 50 kg (for both models)
Power 370W (for both models)

Height, head and leg movement with electrical motor
Trendelenburg, reverse trendelenburg, fowler and vascular positions
Automatically sliding backrest and legrest
Hand control
360�° rotating cross brake system
Hideable and lockable siderails
Easily removable head and foot board
Aluminum metal accessories
Adjustable IV pole
Plastic bumpers
Accessories place on four courners
Cable apparatus

Brand: Rexroth | Axial Piston Variable Displacement Motor
Description: AA6VM 55 HA 1T | Part no: 108690
Condition: Unused, brand new
Origin: Made in Germany
Avaible stock: 4 pcs

Brand: Rexroth | Axial Piston Variable Displacement Motor
Description: AA6VM 55 HA 1T | Part no: 108690
Condition: Unused, brand new
Origin: Made in Germany
Avaible stock: 4 pcs

We are looking for White Rigid Cut Off Grade PVC Profile Flake of Doors And Windows

Scrap of white rigid PVC of Windows and Doors Profile and Rest of manufactured PVC profile (Cut Off Grade) Materials or Flake of the same materials and White HDPE P100 Flake and LDPE Film Scrap


Dear Sir Madam,

As Metal & Plastic Recycling, we are located in and deal with Scrap Metal and Plastic and Raw Material works.

Most of our Customers are Companies that need unprocessed the Scrap of white rigid PVC of Windows and Doors Profile or Flake of the same material and cut-off grade PVC Profile Flake and White HDPE P100 Flake and LDPE Film Scrap in .

For their demands we need right now is
White Rigid PVC Scrap or rest of manufactured Cut-Off Grade PVC Profile Materials or Windows & Doors. And we need Flake of the same Materials.
White HDPE P100 Flake and
LDPE Film Scrap,

Our priority is the rest of manufactured PVC profile Cut-Off Grade Materials and Flake of the same material

Please,
There should not be any unwanted products such as Calcite , Metal, Screw, Rubber, Strip, Wick, Gasket etc. in this Flake product. The material must be clean, washed, free of foreign substances, free of impurities and unmixed and pure.

Please, it must be suitable prices and the materials which must be valid for Scrap Plastic market.

We want to have Please also write your FOB price for comparison. We have a target price to

We will have the first 3 4 kg free sample of Flakes with freight to our address for test, important.

Please send us some pictures and a short video of your materials. I would like your website and contact information.

We will not make a one time purchase. We will work for a long time, wholesales, continuously and


We are looking forward to your reply

PRS-EU8050 " Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 " Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Automatic Marshall Impact Compactor TS EN

Product Code : Product Description

PRS-AS0082/E : Automatic Marshall Impact Compactor with Wooden Pedestal, EN, 220-240 V 50 Hz, (60 Hz version is available upon request)

PRS-AS0082/E-S : Automatic Marshall Impact Compactor with Wooden Pedestal and Soundproof Safety Cabinet, EN, 220-240 V 50 Hz

PRS-AS0067 : Marshall Steel Block, Ã?102 and 50 mm height


The PRS-AS0082/E Automatic Marshall Compactor with wooden pedestal provides a uniform and even degree of compaction. The unit incorporates a compaction pedestal, comprising a laminated hardwood block secured to a concrete block by a 300 mm square x 25 mm thick steel plate. The mechanism lifts the 4535 g ± 15 g hammer and automatically releases it at the specified height of 457 ± 5 mm.

The conveniently positioned control panel comprises of start/stop button, emergency stop button and a direct reading counter used to set the required number of blows. The apparatus stops automatically after the preset number of blows. The automatic Marshall compactor includes the laminate hardwood block and concrete block 450x450x200 mm.

The PRS-AS0082/E is equipped with a motorized mould fixing mechanism which also raises the hammer to provide easy removing of the mould. With this feature, the user can easily release the mould and raise the rammer simultaneously.Particular attention has been paid to operator safety by the inclusion of various in-built safety features.

PRS-AS0067 Marshall Steel Block is used for Initial heating of the foot of compaction hammer and Marshall mouds should be order separately.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives

Product Code Product Description

PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz

PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058

PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.
The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

BMW MINI Valvetronic Motor OEM Part Number 12518678976. Designed to control the Valvetronic variable valve lift system for improved engine efficiency, performance and fuel economy. Compatible with selected BMW and MINI models. Manufactured to OEM specifications for reliable operation, durability and precise fitment. Suitable for replacement and maintenance applications. OEM and genuine quality parts available. Worldwide shipping from Turkey.

OEM Number: 12518678976

Product Code Product Description

PRS-B42212000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B62212000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6221/1102000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B43213000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63213000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/1103000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B0210High Precision Pressure Transducer and Electronic


PARSROS Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re¬liable and consistent testing of a wide range of specimens.

These compression testers are manufactured as a result of continuous research studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM C39 in terms of its tech¬nical properties taking into account the cli-ent requirements.

PRS-B4221 and PRS-B4321Testing Machine is supplied complete with;

â?¢dia. 205x90 mm, dia 205x50 mm and dia 205x30 mm distance pieces

â?¢PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4221 and PRS-B4321 testing machines.

PRS-B6221 and PRS-B6321 Compression Testing Machines are supplied complete with;

â?¢dia165x90 mm, dia 165x50 mm and 2 pcs Ã? 165x30 mm distance pieces

â?¢PRS-B4511 Upper Platen (with ball seating assembly) Ã?165 mm, Lower Platen Ã?165 mm.

PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6221 and PRS-B6321 Compression Testing Machines.

PRSM-4000 : Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 : Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 : Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 : Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 : Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 : Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

It is a group of professional system basketball hoop that could be folded to the ceiling with a remote control system.When the sports branches other than basketball are playing, the basketball hoop is folded to the ceiling and it does not constitute any obstacle.The loop of the basketball hoop will be a spring loop.

Marshall Stability Test Machine with Digital Readout

Product Code Product Description

PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz

PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058
PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.

The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement)

The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine.

Platen Speed 50,8 mm/min
Capacity 50 kN

The PRS-AS0055 Marshall Stability Test Machine is supplied complete with;
â?¢ Load Cell, 50 kN
â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm
â?¢ Hand Wheel for Manual Control
â?¢ Breaking Head, 4â?�

Dimensions 550x700x1200 mm
Weight (approx.) 102 kg
Power 1100 W

Aluminum roller shutter.

Hydraulic pumps.

We have sulphur granulated from seller's mandate.1, 000, 000 mt per year. Please contact us for further conversations in kkmtradepartners community.

Moisture and Impurities: 9G/100g/0,00-0,02
Acid Index 12-0,18
ACIDITY (Oleic %) : 0,06-0.09 Soap( PPM) 0-20
Saponification: Number 188-192
Color: Lovibond 0,6-2,OR/07-12Y
Iodine Index: 110-143
Refraction Index: 1.479-1.4740
Peroxide: 2-7McqD2/Kg
Density: 25oC/4°C 0913-0919
Cold Test: 24Hrs@O*4Moisture and Impurities: 9G/100g/0,00-0,02
Acid Index 12-0,18
ACIDITY (Oleic %) : 0,06-0.09 Soap( PPM) 0-20
Saponification: Number 188-192
Color: Lovibond 0,6-2,OR/07-12Y
Iodine Index: 110-143
Refraction Index: 1.479-1.4740
Peroxide: 2-7McqD2/Kg
Density: 25oC/4°C 0913-0919
Cold Test: 24Hrs@O*4

We could offer Monthly bulk Quantities of Paper both scrap in bales & non scrap as below:
OCC Waste Paper
OINP waste paper
OMG Waste Paper
ONP Waste Paper
The Materials we can supply:
ONP
OINP
Magazine
Cardboard waste paper
OCC
Sorted Office Paper
Waste Yellow Pages Telephone directories
Waste newsprint paper
Mixed Paper
We are sourcing and engaged in distribution of premium quality products both home and abroad. We delight ourselves in Efficient, Reliable and Prompt export and delivery services to all Buyers. Our greatest dream is to expand our market worldwide and because of that,we work day and night in order to provide our clients with the best which is our number one priority.

Specifications:
- Feather off
- well cleaned and fresh
- no bruises
- no black pads or ammonia burns
- no bad smells
- no excessive blood or blood stains
- moisture content is less than 3%
weight and packaging:
whole chicken each weight 800g to 2500g x 7-10 in a box
5Kg LDPE poly bags in 20Kg Strong Cartoon box with 4 straps outsideOther parts from 2kg up to 10 - 15/20kg
Customised packaging of all other sizes are offered, and we also provide labels for buyers.

Colour of the solution: 45 icumsa units max
Radiation: within internationally accepted limits
Moisture content: 0.06% max
Invert sugar content: 0.04% max
Conductivity ash: 0.04% max
Sulphur dioxide: 15 mg/kg max
Anti-caking agents: maximum level of 1.5 m/m singly or combination of following agents:
-calcium phosphate, tribasic
- magnesium carbonate
- silicon dioxide, amorphous (dehydrated silica gel)
- calcium silicate
- magnesium trisilicate
- sodium aluminosilicate
- calcium aluminosilicate
Polarization: 99.7% min
Moisture content: 0.06% max
Invert sugar content: 0.04% max
Conductivity ash: 0.04% max
Total bacteria: 60 max
E. Coli: 30 max
Mould: 25 max
Sulphur dioxide (sosub2): 15 max
Arsenic (as): 0.5 max
Lead (pb): 0.5 max