Find Verified Glass Cabins Suppliers, Manufacturers and Wholesalers

Acetoxy base high performance silicone selaant and adhesive designed for shower cabins. High adhesion. Contains anti-fugnal compound to protect the sealant aganish mildew and black mould. Solvent free %100 silicone. Durable elastic sealing and bonding for shower cabin, bathroom and kitchen applications.

Product Code Product Description

PRS-A0885 Reference Colours Glass

PRSGG-1705 Graduated Impurities Test, Glass Bottle 500 ml, ASTM

PRSGG-1710 Graduated Impurities Test, Glass Bottle 1000 ml, ASTM

PRSGG-1720 Cylindrical Glass Bottle with Cork Stopper, for Organic Impurities, 450 ml,EN

PRSGC-0840 Sodium Hydroxide 1 kg


The Reference Colour Glass consists of 5 organic glass scales mounted in a plastic holder, which is used for the comparison of the colour results from the relevant test.

The 500 ml and 1000 ml capacity Graduated Glass Bottles are used for making reference standard colour and test solution according to the ASTM standard.

PRSGG-1720 450 ml Cylindrical Glass Bottle is used for determination of organic impurities as required in the EN standard.

The mobile blood donation tool is manufactured as a cabin with a volume expanding 1 meter to the right and left. Cab expansion is hydraulically controlled.

- The cabinet is insulated against heat, water and dust. The cabin walls, the base of the cab and the cabin doors are made of glass-reinforced polyester material (FRP) that does not advance flame and extinguishes itself. The panels are filled with 4 cm thickness and 32 density density foam material. Panel walls are produced with wet technology. The walls are mono-block. Walls and frame are supported by box profiles.

- Cab floor covering is made of 18 mm polywood material. It is covered with 2 mm epoxy or PVC floor covering to provide water and dust insulation.

- There are entrance and exit doors equipped with handrails in front and behind the cabin. In the design, the emergency exit scenario is taken into account and all doors must be locked from both inside and outside. The gas piston system is added so that all doors can be self-closing.

GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Another art that has developed in Anatolia paralel to architecture is tilework and ceramics. The first use of it in Anatolia is by Seljuk artists, they have especially been successful in portraits of animals. The artwork of tiles that has begun in 14th century in znik, in 15th century in Kntahya and in 17th century in anakkale has formed a rich mosaic by bringing together the colors, designs and forms unique to itself and brought new interpretations to Ottoman period of tile and ceramic arts. Between 14th-19th centuries Turkish artwork of tiles and ceramics has become famous worldwide through its creative workmanship. This serie of products are reproduced today according to their traditional specifications and brought to a new dimension by transforming Iznik Tiles to functional works of art. znik Tiles containing Quartz (%80) are completely handcrafted and will be important elements of tomorrows special collections.

With constant help and support of refined infrastructure unit, we are indulged in making an exclusive range of Twist Off Caps. These products are accessible and are made-up using optimum quality of raw material and high-end tools and technology. Moreover, these products are obtainable at reasonable rates.

Features :

Easy to fix
Heat resistant
Optimum functionality

With constant help and support of refined infrastructure unit, we are indulged in making an exclusive range of Twist Off Caps. These products are accessible and are made-up using optimum quality of raw material and high-end tools and technology. Moreover, these products are obtainable at reasonable rates.

Features :

Easy to fix
Heat resistant
Optimum functionality

Highest efficiency level.
Lowest energy consumption for applications with need for continuous air flow.
Long lived operation system provided by reciprocal coupling.
Efficient transfer system due to elastic coupling
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Direct coupling drive.
Silent and vibration free operation due to polyurethane coupling.
One- to- one (1:1) direct coupling.
Star triangulation starter system.
PLC control unit
Radiator with tropical type of air- oil combination. Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency. Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Product Code Product Description

PRS-AS0135 Water in Bituminous Materials Test Set (Dean-Stark Method) 220-240 V 50 Hz

STANDARDS : ASTM D95, D244; AASHTO T55, T59; IP 74/77; CNR No.101; NLT 123

The PRS-AS0135 test set is used for determining the water content of bituminous materials. The test is based on distilling the sample with a volatile solvent. The material to be tested is heated under reflux with a water immiscible solvent, which distills together with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settles in the graduated section of the trap, and the solvent returns to the still.

Test Set Consists Of;
Electric Heater with Thermo Regulator
Glass Condenser
Glass Receiver
Glass Still, 10 ml

Dimensions 200x200x450 mm
Weight (approx.) 4 kg
Power 250 W

Receptacle:
Filling volume: 105cc
Material: Glass
Weight: 126g
Diameter: 44mm
Height: 127,5mm
Head shape: 38 Regular to FD 146
Mills:
Material: Ceramic
Usage: Manuel

Manual Softening Point Apparatus (Ring and Ball Test Sets )

Product Code Product Description

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz

PRS-AS0130/110 Ring and Ball Test Set, 110 V 60 Hz

PRSTD-1410 Hot Plate with Magnetic Stirrer

PRS-AS0131 Brass Ring, with Steel Ball and Ball Centering Guides, 2 pcs.each

PRS-AS0132 Ring Holder and Assembly

PRSGG-1330 Borosilicate Glass Beaker 600 ml

PRSGT-1305 Glass Thermometer Max. 110°C

PRSGT-1315 Glass Thermometer Max. 250°C

PRSGT-2050 ASTM 15C Thermometer -2 +80°C (IP 6OC)

PRSGT-2055 ASTM 16C Thermometer +30 + 200°C (IP 61C)

STANDARDS : EN 1427; ASTM D36; AASHTO T53

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz The PRS-AS0130 Ring and Ball Test Set is used for determining the softening point of bituminous materials by ring and ball method.

If required, Glass Thermometer PRSGT-1305, PRSGT-1315, ASTM 15C or 16C Thermometer should be ordered separately.

The Ring and Ball Test Set is supplied complete with;

â?¢ Hot Plate with Magnetic Stirrer
â?¢ Brass Rings, 2 pcs.
â?¢ Ball Centering Guides, 2 pcs.
â?¢ Thermometer, Temperature Sensor with Holder
â?¢ Steel Balls, 9.5 mm dia., 2 pcs.
â?¢ Ring Holder and Assembly
â?¢ Borasilicate Glass Vessel Beaker 600ml

Dimensions 280x400x200 mm (packed)

Weight (approx.) 4 kg

Power 650 W

Tank top Screw Type Compressors
Compact design, advanced technology
High quality, dry air due to integrated dryer
Highest performance level with the most convenient investment cost
Affordable service cost and maintenance easiness
Uninterrupted production with high quality air
Easy installation and minimum fixing cost
Low noise level & silent operation
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It's a high-quality acetic curing system-based silicone sealant featuring excellent adhesion to glass and many other non porous surfaces.

Steel boom system in dimensions 1 9x 1 9x3 cm, Backboard made up of special secure glass 180x105x1,2 cm supported by profiles 40x40x2 mm, Electrostatic paint, Hydraulic ring, Folding and mobile, Certificated by the Institute of Turkish Standards, Padding system for protecting players, Padding against head hitting, 24 seconds apparatus, The boom and the body are connected by iron casting slot system

Product Code Product Description

PRS-CM0050/A Vicat Test Set EN

PRS-CM0050/E Vicat Test Set ASTM

PRS-CM0051 Vicat Apparatus (Frame)

PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm

PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm

PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia.

PRS-CM0053/A Vicat Needle ASTM 1 mm dia.

PRS-CM0054 Final Vicat Needle EN 1.13 mm dia.

PRS-CM0055 Consistency Plunger 10 mm dia.

PRS-CM0056 Supporting Glass Plate

PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050

PRSGT-1305 Glass Thermometer Max. 110°C

PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2

STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131
The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method.
PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water.
The Vicat Test Set is supplied complete with;
Vicat Mould
Initial and final Needles (for EN )
Vicat Needle (for ASTM)
Consistency Plunger
Supporting Plate
Glass Thermometer
Transfer Dish (for EN)

Dimensions 150x190x318 mm
Weight (approx.) 3 kg

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

* Produced at EN 14683 and 93/42/EEC standards.

* The mask, produced from non-woven material, is anti-allergic.

* Medical Surgical Mask does not contain fiber glass, rubber latex, dry rubber, latex, and glass fiber materials.

* Mask providing comfortable breathing is suitable for use with protective goggles.

* There is a 50-gr Spunbond fabric on the 1st front layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 2nd middle layer, 30-gr Spunbond fabric on the 3rd middle layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 4th middle layer, and a 25 gr Spunbond fabric on the 5th back layer.

* It has a polypropylene (PP) coated, aluminum, soft and adjustable double nasal wire.

* The mask fabrics made of PP raw material carry odors, caused by the production and due to subsequent transportation, storage, humidity in the storage area and other reasons, that disturb the mask users.

* PROF MASK offers you N95 masks with lavender oil and antiseptic properties. N95 masks with the scent of lavender are offered for your use as being free from germs and bacteria due to the antiseptic feature of lavender oil. The scent of lavender in our masks is obtained from lavender oil, not from lavender essence.

Product Code Product Description

PRS-CM0003 Le Chatelier Flask

STANDARDS : EN 196-6, 450-1, 15617-1; ASTM C110, C128, C188; C989; AASHTO T133

The PRS-CM0003 Le Chatelier Flask is used to determine the density of hydraulic cement, ground granulated blast-furnace slag and fly ash for concrete, filler aggregates and lime.The glass flask has a 250ml capacity. The neck is graduated from 0 to 1 ml and from 18 to 24 mL in 0.1-mL graduations.

Dimensions 100x100x300 mm

Weight (approx.) 0.1 kg

Black mask production is not done due to its harm to human health.
* Produced at EN 14683 and 93/42/EEC standards.

* The mask, produced from non-woven material, is anti-allergic.

* Medical Surgical Mask does not contain fiber glass, rubber latex, dry rubber, latex, and glass fiber materials.

* Mask providing comfortable breathing is suitable for use with protective goggles.

* There is a 50-gr Spunbond fabric on the 1st front layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 2nd middle layer, 30-gr Spunbond fabric on the 3rd middle layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 4th middle layer, and a 25 gr Spunbond fabric on the 5th back layer.

* It has a polypropylene (PP) coated, aluminum, soft and adjustable double nasal wire.

* The mask fabrics made of PP raw material carry odors, caused by the production and due to subsequent transportation, storage, humidity in the storage area and other reasons, that disturb the mask users.

* PROF MASK offers you N95 masks with lavender oil and antiseptic properties. N95 masks with the scent of lavender are offered for your use as being free from germs and bacteria due to the antiseptic feature of lavender oil. The scent of lavender in our masks is obtained from lavender oil, not from lavender essence.

Black mask production is not done due to its harm to human health.
* Produced at EN 14683 and 93/42/EEC standards.

* The mask, produced from non-woven material, is anti-allergic.

* Medical Surgical Mask does not contain fiber glass, rubber latex, dry rubber, latex, and glass fiber materials.

* Mask providing comfortable breathing is suitable for use with protective goggles.

* There is a 50-gr Spunbond fabric on the 1st front layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 2nd middle layer, 30-gr Spunbond fabric on the 3rd middle layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 4th middle layer, and a 25 gr Spunbond fabric on the 5th back layer.

* It has a polypropylene (PP) coated, aluminum, soft and adjustable double nasal wire.

* The mask fabrics made of PP raw material carry odors, caused by the production and due to subsequent transportation, storage, humidity in the storage area and other reasons, that disturb the mask users.

* OURMASK offers you N95 masks with lavender oil and antiseptic properties. N95 masks with the scent of lavender are offered for your use as being free from germs and bacteria due to the antiseptic feature of lavender oil. The scent of lavender in our masks is obtained from lavender oil, not from lavender essence.

Packaging Information