Find Verified Embroidery Machine Suppliers, Manufacturers and Wholesalers

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

Product General Features
Drilling center, fixed column, movable worktable structure. Complex workpieces that require milling, drilling, drilling, reaming and countersinking can be completed in a single assembly. It is widely used in electronics and vehicle parts industries.

Product General Features
Drilling center, fixed column, movable worktable structure. Complex workpieces that require milling, drilling, drilling, reaming and countersinking can be completed in a single assembly. It is widely used in electronics and vehicle parts industries.

For details contact us .

Product Code Product Description

PRS-CM0098Vibrating Machine for 70.7 mm Cube Moulds, BS, 220-240 V 50 Hz

STANDARDS : BS 4550

The PRS-CM0098 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens.

The mould table is mounted on four springs attached to an eccentric shaft which allows each sample to be vibrated at 12000 cycles per minute. There is a timer on it to preset time and it stops automatically in every 120 seconds.

60 Hz version should be mentioned on order if required.
70.7 mm cube mould (PRS-CM0096) should be ordered separately.

Dimensions450x650x850 mm

Weight (approx.)80 kg

Eccentric Shaft Rotation12000 r.p.m

Power1100 W

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Product Code : Product Description

PRS-B1010 : Universal Cutting Machine Small, 380 V

PRS-B1020 : Universal Cutting Machine Junior, 380 V

PRS-B1030 : Universal Cutting Machine Major, 380 V

PRS-B1012 : Cutting Blade Ã? 350 mm

PRS-B1022 : Cutting Blade Ã? 450 mm

PRS-B1032 : Cutting Blade Ã? 600 mm

The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. It is available in three different models.

Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with â??Vâ?? block clamp for Ã? 100 mm specimens and a water circulation pump.

If 220 V is requiered please mension at time of order.

Cutting Blade should be ordered separately.

Automatic Grinding Machine

Product Code Product Description
PRS-1040Automatic Grinding Machine, 220-240 V 50-60 Hz

PRS-1042Grinding Wheel PRS-1035 and PRS-1040

PRS-1043Cradle for Ã?:38-100 mm Cylindrical Specimens

PRS-1044Water Restraint Panel Set

PRS-1048Water Restraint Panel for dia 160mm Cylinder Specimen

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

PRS-EU8050 " Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 " Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Product Code : Product Description

PRSâ??A0600 : Los Angeles Abrasion Machine (60 Hz version is available upon request)

PRSâ??A0600/110 : Los Angeles Abrasion Machine 110 V 60 Hz

PRSâ??A0601 : Los Angeles Abrasion Machine with Soundproof Safety Cabinet 220-240 V 50Hz

PRSâ??A0601/110 : Los Angeles Abrasion Machine with Soundproof Safety Cabinet, 110 V 60 Hz

PRSâ??A0602/E : Los Angeles Abrasion Charges EN,12 pcs.

PRSâ??A0602/A : Los Angeles Abrasion Charges ASTM/AASHTO, 12 pcs.

PRSâ??A0605 : Soundproof Safety Cabinet for Los Angeles Abrasion Machine

The Los Angeles Abrasion Machine is used for determination of the aggregates resistance to fragmentation. The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. The drum is rotated at a speed of 31-33 r.p.m. The internal shelf provided with the machine confirms to ASTM, AASHTO and EN standards.

The machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. The drum is equipped with an interlock device which allows the operator to lock the drum into position for easy loading/unloading of the sample.

A steel tray is supplied with the machine for easy discharge of specimen and abrasive charges.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

PRSM-4000 : Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 : Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 : Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 : Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 : Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 : Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

Product Code Product Description

PRS-1035Semi-Automatic Grinding Machine, 220-240 V 50-60 Hz

PRS-1042Grinding Wheel for PRS-1035 and PRS-1040

PRS-1043Cradle for Ã?:38-100 mm Cylindrical Specimens

PRS-1044Water Restraint Panel Set

PRS-1048Water Restraint Panel for Ã?160mm Cylinder Specimen

The PRS-1035 Semi-Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards.

The ony differance between automatic machine and semi-automatic machie is that the cradle of the semi-automatic machine is moved toward the grinding wheel by user. All grinding process is automatic except the movement of the cradle for semi-automatic machine. The optimum cycle to be applied by user is 5-6 cycle/per minute.

The machine is manufactured from stainless steel for resistance to corrosion. The water restraint panels should be ordered seperately for cubic specimens or different sized cylindrical specimens.


The Semi-Automatic Grinding Machine is supplied complete with;

The preparation of concrete cylinder test specimen for compressive strength testEN 12390-1, 12390-3 ASTM C31, C39, C192, C617

The maximum tolerance on the flatness of the potential load bearing surfaces (the ends of compression test specimens) is 0.002 in. [0.050 mm]

The preparation of drilled concrete cores specimen for compressive strength testEN 12504-1, 12390-1, 12390-3 ASTM C42, C397

The deviation of perpendicularity of the side, with reference to O the end faces is 0,5O

â?¢Grinding Wheel for concrete specimens

â?¢Cradle for Ã?:38mm to100 mm cylindrical specimens

â?¢Water restraint panel set f (Consist of four panels Ã?150, 100, 75 and 50 mm)

Dimensions730x1200x1500 mm

Weight (approx.)280 kg

Power1850 W

Product Code Product Description

PRS-KA1010 Universal Cutting Machine Small, 380 V

PRS-KA1012 Cutting Blade Ã? 350 mm

STANDARDS : EN 12390â??3, 12504-1; ASTM C42, D4543

The PARSROS Series Universal Cutting Machines have been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens.

Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with block clamp for Ã? 100 mm specimens and a water circulation pump.

If 220 V is required please mention at time of order.

Cutting Blades should be ordered separately.

Product Code PRS-KA1010 Small
Length 1100 mm
Width 600 mm
Heigth 1300 mm
Blade Diameter 350 mm
Max. Cutting Heigth 700 mm
Cutting Length 700 mm
Engine Power 3 hp/220 V
Weigth 115 kg
Water Pump Power 0.37 hp/220 V

Product Code : Product Description

PRS-ZE0860 : Automatic CBR Test Machine, 220-240 V 50-60 Hz

PRS-ZE0860/110 : Automatic Digital CBR Test Machine, 110 V 60 Hz

The PRS-ZE0860 Automatic CBR Test Machine is designed for performing laboratory evaluation of the CBR value of highway sub-bases and sub-grade, and determination of the strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?).

The PRS-ZE0860 is composed of a robust and compact two column frame with adjustable upper crossbeam driven by an electromechanical ram with a maximum capacity of 50 kN and a data acquisition and processing system.

The PRS-ZE0860 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals. The ram speed can be set between 0.5 mm/min to 5 mm/min by using the Digital Readout Unit. This main feature allows the user to perform tests complying to BS, EN, ASTM or AASHTO standards with the same machine.

Rapid adjustment of the platen is also provided by up and down buttons which are located on the front panel of the machine. The PRS-ZE0860 is supplied complete with a 50 kN load cell, penetration piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and connection cable. PC is optional.

The CBR Test Machine is supplied complete with;
Load Cell, 50 kN
Penetration Piston
Linear Potentiometric Displacement Transducer with Connection Part, 25x0.001 mm
Computer Software
Connection Cable

Marshall Stability Test Machine with Digital Readout

Product Code Product Description

PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz

PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058
PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.

The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement)

The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine.

Platen Speed 50,8 mm/min
Capacity 50 kN

The PRS-AS0055 Marshall Stability Test Machine is supplied complete with;
â?¢ Load Cell, 50 kN
â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm
â?¢ Hand Wheel for Manual Control
â?¢ Breaking Head, 4â?�

Dimensions 550x700x1200 mm
Weight (approx.) 102 kg
Power 1100 W

Technical Parameters
Model SF6020T
Tube Length 20-320mm
Laser Power - 1 kw -4 kw
Repeated Positioning Accuracy �±0.03mm/m

Automatic metal tube laser cutter is used for cutting round tube, square tube, rectangular tube and other metal tube. Widely used in
rail transit, automotive, construction machinery, agriculture and forestry machinery, electrical manufacturing, elevator
manufacturing, household appliances and other machinery manufacturing and processing industries.

ParsRos Automatic Compression Testing Machines

Product code

PRS-B423 2000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B6321 2000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/11 2000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B433 3000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6331/110 3000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz
PRS-B0210 High Precision Pressure Transducer and Electronic


PARSROS Automatic range of 2000 kN and 3000 kN capacity compression testing machines have been designed for reliable and consistent testing of a wide range of specimens.

These compression testers are the results of continu¨ous research to upgrade the testing machines with the latest technologies to conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM C39 in terms of its technical properties taking into account client requirements. These also meet the requirements of CE norms for the safety and health of the operator.

The advantages of performing tests on computer with using PARSROS Software, such as reporting, graphical output, etc.,


PRS-B4321and PRS-B4331Testing Machine is supplied complete with;
205x90 mm, �? 205x50 mm and �? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) 300 mm, Lower Platen 300
mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4321 and PRS-B4331 testing machines.

PRS-B6321 and PRS-B6331 Compression Testing Machines are supplied complete with;
165x90 mm, 165x50 mm and 2 pcs. 165x30 mm distance pieces

PRS-B4511 Upper Platen (with ball seating assembly) 165 mm, Lower Platen 165 mm.
PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6321 and PRS-B6331 Compression Testing Machines.
Safety Features
Maximum pressure valves to avoid machine overloading
Piston travel limit switch
Emergency stop button
Front and rear transparent durable plexiglas guards
Software controlled maximum load value

Product Code Product Description

PRS-B42212000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B62212000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6221/1102000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B43213000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

PRS-B63213000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz

PRS-B6321/1103000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz

PRS-B0210High Precision Pressure Transducer and Electronic


PARSROS Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re¬liable and consistent testing of a wide range of specimens.

These compression testers are manufactured as a result of continuous research studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM C39 in terms of its tech¬nical properties taking into account the cli-ent requirements.

PRS-B4221 and PRS-B4321Testing Machine is supplied complete with;

â?¢dia. 205x90 mm, dia 205x50 mm and dia 205x30 mm distance pieces

â?¢PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.

PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4221 and PRS-B4321 testing machines.

PRS-B6221 and PRS-B6321 Compression Testing Machines are supplied complete with;

â?¢dia165x90 mm, dia 165x50 mm and 2 pcs Ã? 165x30 mm distance pieces

â?¢PRS-B4511 Upper Platen (with ball seating assembly) Ã?165 mm, Lower Platen Ã?165 mm.

PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6221 and PRS-B6321 Compression Testing Machines.

Four Column Automatic Compression Testing Machines

Product Code Product Description

PRS-B52312000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B53313000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B54314000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B55315000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz

PRS-B0210High Precision Pressure Transducer and Electronic


PRS-B5231 and PRS-B5331 Testing Machine is supplied complete with;

Ã? 205x90 mm, Ã? 205x50 mm and Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B5231 and PRS-B5331 testing machines.

PRS-B5431 and PRS-B5531 Compression Testing Machines are supplied complete with;

2 pcs. Ã? 205x90 mm, 2 pcs. Ã? 205x50 mm and 2 pcs. Ã? 205x30 mm distance pieces

PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm.
PRS-B4510, PRS-4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4531 and PRS-B5531 Testing Machines

Product Code : Product Description

PRS-ZE0852 : CBR Test Machine with Load Ring, 50 kN capacity, 220-240 V 50-60 Hz

PRS-ZE0852/110 : CBR Test Machine with Load Ring, 50 kN capacity, 110 V 60 Hz

STANDARDS

NF P94-078; UNI CNR 10009

The PRS-ZE0852 is designed for performing laboratory evaluation of the CBR value of highway sub bases and subgrade and for the determination of strength of cohesive materials which have maximum particle sizes less than 19 mm (3/4â?).

The PRS-ZE0852 is designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals.

The machine is designed to be mounted on a suitable bench and comprises of a robust and compact two column frame with adjustable upper cross beam. The frame has 50 kN capacity.

Two test speeds are provided 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO tests. This main feature allows the user to perform tests complying to BS or ASTM/EN/AASHTO standards with the same machine. Loading and unloading are down from the front panel by UP/DOWN buttons. Unloading speed is udjusted 5 mm/min for easy re-testing.


The CBR Test Machine is supplied complete with;
Load Ring, 50 kN
Digital Gauge with Connection Part, 25x0.01 mm
Penetration Piston

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.)
â?¢ Choosing the compression or flexure frame by using the changeover valve.
â?¢ Pressing the START button on the control unit.
â?¢ The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
â?¢ Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

Automatic Cement Compression & Flexure Testing Machines

Product Code Product Description

PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.

The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

Setting test parameters, including pace rate (only required when the specimen type is changed.)

Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.

The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
Automatically saves the test parameters and test results.

The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system

PRS-A0610 : Wide Wheel Abrasion Testing Machine, 220-240 V 50 Hz(110 V 60 Hz version is available upon request)

PRS-A0610/1 : Wide Abrasion Wheel, for PRS-A0610

PRS-A0610/2 : Convert Equipment Set from PRS-A0610 Wide Wheel Abrasion Testing Machine to PRS-A0613 Narrow Wheel Abrasion Testing Machine

PRS-A0611 : Abrasive Corundum Sand 25 kg for PRS-A0610 and PRS-A0613

PRS-A0613 : Calibration Marble for PRS-A0610

PRS-A0612 : Narrow Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110V 60Hz version is available upon request)

PRS-A0613/1 : Narrow Abrasion Wheel, for PRS-A0613

PRS-A0613/2 : Convert Equipment Set from PRS-A0613 Narrow Wheel Abrasion Testing Machine to PRS-A061 - Wide Wheel Abrasion Testing Machine

PRS-A0610 : Mould, EN 12808-2, Polyethylene, 100 ±1x100 ±1x10 ±1 mm, for PRS-A0613

Product Code : Product Description

PRS-A0810 : Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz

PRS-A0812 : Corn Emery 5 kg, for PRS-A0810

PRS-A0813 : Flour Emery 5 kg, for PRS-A0810

PRS-A0814 : Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60
PRS-A0815 : Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65


Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.
Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
Road Wheel,
Side Plate,
Rubber Rings,
Solid Rubber- Tired Wheel - 2 units,
Drive Belt,
Abrasive Feed Mechanism,
Corn Emery - 5 kg,
Flour Emery - 5 kg,
Tool Kit,
Specimen Moulds - 2 pcs,
2 Mould Plates


Road Wheel Speed 315 to 325 r.p.m

Dimensions 740x720x1520 mm

Weight (approx.) 175 kg

Power 850 W

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Product Code Product Description

PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz

PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz

PRS-AS0057 Breaking Head (Stability Mould) 4â?�

PRS-AS0058 Breaking Head (Stability Mould) 6â?�

PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058

PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia.

STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245

The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures.
The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes.

The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

a. Price of product - depends on customers product
b. Product origin - Turkey
c. Key Specifications/Special Features
d. Minimum Order Size : 1 full Truck or 1 full container
e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.

Product Code Product Description

PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine, 230 V, 50 Hz, 1 ph

PRS-KA0302 Cooling Recirculating Pump with Reservoir, 230 V, 50 Hz, 1 ph

PRS-KA0304 Diamond Cutting Blade, 230x2.5 mm thickness

PRS-KA0306 Double-Faced Cup Wheel, Ã? 200x16 mm

STANDARDS : ASTM D4543

The PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine is used for obtaining rock samples perfectly machined (cubes, prisms, etc.) from irregular rock or core pieces.

The PRS-KA0300 is supplied complete with a vice to hold irregular pieces firmly in place up to 70x140 mm approx. A second V shaped vice is used to cut cores to a maximum size 75 mm dia. x 140 mm height. Longer cores can be obtained by turning the samples upside down in the vice. It is supplied complete with a cooling water inlet.

The PRS-KA0304 Diamond Cutting Blade has a diameter of 230 mm, 2.5 mm thickness and the maximum cutting area is 110x70 mm. The speed of the blade is 3000 rpm.

The PRS-KA0306 Double-Faced Cup Wheel has a diameter of 200 mm and 16 mm thickness. It is used for finishing the sample ends parallel and at right angles to the axis.

The PRS-KA0306 Double-Faced Cup Wheel, PRS-KA0304 Cutting Blade and PRS-KA0302 Cooling Recirculating Pump with Reservoir should be ordered separately.
PRS-KA0300 and PRS-KA0302 for 60 Hz with 220 V or 100 V can be supplied.



Dimensions 730x1050x590 mm
Weigth (approx.) 100 kg
Power 1100 W

Power Unit
Manufacture:man/mercedes/cummins
Power:235 Kw (320hp)
Mast And Feed System
Pull Up:22.600 Kg
Pull Down:12.000 Kg
Feed Travel :3,5 M
Main Hoist
Single Line Capacityä°:19.000 Kg
Rotaton Unit
Spindle Diameter:117 Mm
Side Shift:300mm
Mounting Tipe:crawler- Truck-skid
Depth Capacity
Bq:1000
Nq:750
Hq:400
Pq:150

Product Code Product Description

PRS-CM00020 High Pressure Cement Autoclave, 230 V 50-60 Hz

STANDARDS : ASTM C151, C490; UNE 7207

The PRS-CM00020 High Pressure Cement Autoclave is designed to perform expansion tests on cement specimens.10 specimens can simultaneously be tested in the high pressure steam vessel of 154 mm diameter and 430 mm height.

The Autoclave consists of a pressure gauge, pressure regulator, temperature regülatör, control switches and safety valve.

PRS-CM0033 Two Gang Shrinkage mould should be ordered separately.

The High Pressure Cement Autoclave is supplied complete with;
Specimen Rack, 10 samples capacity

Dimensions 450x475x1080 mm
Weight (approx.) 55 kg
Power 2600 W

Product Code Product Description

PRS-ZE0080 Field Inspection Testing Kit

PRS-ZE0082 Field Inspection Pocket Vane Tester

PRS-ZE0082/1 Extension Rod for PRS-ZE0082

PRS-ZE0084 Heavy Duty Pocket Penetrometer, 0-10 kgf/cm2

STANDARDS : ASTM D2573

The PRS-ZE0080 Field Inspection Testing Kit is ideal for geotechnicians, geologists and agronomists. It consists of the PRS-ZE0084 Pocket Penetrometer and of the PRS-ZE0082 Field Inspection Pocket Vane Tester. The instrument is contained in a practical carrying case.

PRS-ZE0080 Field Inspection Testing Kit

Dimensions (packed) 240x210x50 mm

Weigth (approx.) 1.8 kg

The PRS-ZE0082 Field Inspection Pocket Vane Tester is especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strength of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod. All stainless steel construction. Supplied in a plastic case. Extension rod should be ordered separately.

PRS-ZE0082 Field Inspections Pocket Vane Tester

Vane Dimensions (height x dia.) 32x16; 40x20, 50.8x25.4 mm

Measuring Range 0 to 240 kPa (0-24 N/cm')

Torque Value 5 N - m

Extension Rod 500 mm depth.

Overall Dimensions (assembled) 310x105 mm

Weight 1.3 kg

The PRS-ZE0084 Heavy Duty Pocket Penetrometer is designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Heavy duty model is all stainless steel construction, three interchangeable tips: 4.5 mm dia. for very hard soil, 6.35 mm for medium and soft soil, 8.98 mm for soft soil. Supplied complete with plastic case.

PRS-ZE0084 Heavy Duty Pocket Penetrometer

Measuring Range 0 to 10 kgf/cm'

Dimensions (assembled) 210 mm length x 20 mm dia.

Weight (approx.) 0.5 kg

Product Code Product Description

PRS-ZE1320 Falling Head Permeability Set

PRS-ZE1322 Falling Head Permeability Cell 100 mm dia.

PRS-ZE1324 Wooden Stand with 4 Manometer Tubes

PRS-ZE1326 Soaking Reservoir Tank

STANDARDS : BS 5930:1999, / 1377, ASTM 46 / 47

The PRS-ZE1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly finegrained soils such as clay-like or silty soils, with respect to water flow.
The PRS-ZE1322 Falling Head Permeability Cell is manufactured from plated steel with an inside diameter of 100 mm.

The PRS-ZE1324 Wooden Stand is fitted with 4 glass Manometer Tubes of each 1500 mm long with inside diameters of about 21 mm, 12 mm, 5 mm and 3.5 mm. All tubes have connection valves.

The PRS-ZE1326 Soaking Reservoir Tank is manufactured from plated steel with an over-flow tube and is used for containing the permeability cell during the test.
Optional Equipment For De-Airing Water should be ordered separately.

The PRS-ZE1320 Falling Head Permeability Set is supplied complete with;
â?¢ Ã? 100 mm Falling Head Permeability Cell
â?¢ Wooden Stand with 4 manometer tubes
â?¢ Soaking Reservoir Tank
â?¢ 3 m Hose

Product Code Dimensions Weight (approx.)

PRS-ZE1322 150x150x260 mm 3 kg

PRS-ZE1324 230x100x1700 mm 6.6 kg

PRS-ZE1326 320x320x250 mm 3.6 kg

Product Code Product Description

PRS-ZE1500 Pinhole Test Apparatus

PRS-ZE1502 PVC Tubing Ã? 10x8 mm 10 m Coil

STANDARDS : BS 1377:5; ASTM D4647

Water flowing through fine-grained soils with high sodium content makes them highly erodible.
The PRS-ZE1500 Pinhole Test Apparatus is used for evaluating the erodibility of clay soils by flowing water through a small hole that is drilled through the compacted specimen.
The apparatus consists of a cylindrical metal container fitted one end with a water inlet and the other end with an outlet connection, a standpipe tube with scale and a stand to support the apparatus.

Dimensions 150x200x1200 mm
Weight (approx.) 3.5 kg

Product Code Product Description

PRS-CM6700 250 kN Cement Compression Frame

PRS-CM6710 15/250 kN Cement Flexure/Compression Frame

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1

The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices.

Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately.


Distance Pieces for Frame

Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens.
Distance Pieces

PRS-CM4630 Distance piece dia. 165 mm x 15 mm
PRS-CM4631 Distance piece dia. 165 mm x 30 mm
PRS-CM4633 Distance piece dia. 165 mm x 50 mm
PRS-CM4634 Distance piece dia. 165 mm x 90 mm

Platens

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished.

The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm.

Loading Cylinder Assembly & Limit Switch

All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity.
The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump.
There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.

Accessories

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
Filling Hopper
Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Melting Pot

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz

STANDARDS : EN 12390â??3, 12390-1, 12504-1; ASTM C31, C192, C617, C39, C42; AASTHO T23, T126

The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions 350x320x290 mm
Weight (approx.) 9 kg
Power 600 W

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

Product Code Product Description

PRS-CM0069 Bulk Density Apparatus

STANDARDS : EN 459-2

The bulk density of lime is of interest for storage and packaging and for determining volume and capacity of mixing equipment necessary for processing the material.

The PRS-CM0069 Bulk Density Apparatus is designed to determine bulk density by allowing a sample to fall from a known height into a volumetric container.

The apparatus consists of a hopper, 1 liter capacity cylindrical container and a spring-loaded trap.

Dimensions 250x250x750 mm

Weight (approx.) 2 kg

Product Code Product Description

PRS-ZE0900 Sand Replacement Test Set 100 mm BS

PRS-ZE0901 Sand Pouring Cylinder 100 mm dia. for PRS-ZE0900

PRS-ZE0902 Calibration Container for PRS-ZE0900

PRS-ZE0903 Metal Tray for PRS-ZE0900

PRS-ZE0910 Sand Replacement Test Set 150 mm BS

PRS-ZE0911 Sand Pouring Cylinder 150 mm dia. for PRS-ZE0910

PRS-ZE0912 Calibration Container for PRS-ZE0910

PRS-ZE0913 Metal Tray for PRS-ZE0910

PRS-ZE0920 Sand Replacement Test Set 200 mm BS

PRS-ZE0921 Sand Pouring Cylinder 200 mm dia. for PRS-ZE0920

PRS-ZE0922 Calibration Container for PRS-ZE0920

PRS-ZE0923 Metal Tray for PRS-ZE0920

STANDARDS : BS 1377:9, 1924:2
The Sand Replacement Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminum and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes.

Product Code Dimensions Weight (approx.)
PRS-ZE0900 300x300x440 mm 8 kg
PRS-ZE0910 300x300x500 mm 14 kg
PRS-ZE0920 500x500x660 mm 27 kg

Product Code Product Description

PRS-CM0058 Gillimore Apparatus

STANDARDS : ASTM C91, C141, C150, C266; AASHTO T154

The PRS-CM0058 Gillmore Apparatus is used to determine the setting time of cement hydraulic hydrometer lime and mortar. Apparatus consists of two horizontally positioned arms, carrying weighted needles, initial needle has a 2.12 mm diameter and 113.4 g in weight and the final needle has a 1.06 mm diameter and 453.6 g in weight.

Dimensions 300x100x300 mm
Weight (approx.) 2,5 kg

Product Code Product Description

PRS-ZE0620 Automatic Soil Compactor, 220-240 V 50 Hz (60 Hz version is available upon request)

PRS-ZE0620/110 Automatic Soil Compactor, 110 V 60 Hz

PRS-ZE0622 ASTM/EN/BS Rammer for PRS-ZE0620

PRS-ZE0624 ASTM Rammer Face Ã? 50.8 mm for PRS-ZE0620

PRS-ZE0625 EN/BS Rammer Face Ã? 50 mm for PRS-ZE0620

STANDARDS : ASTM D558, D559, D560, D698, D1557, D1883; EN 13286 2, 13286-47; BS 1377:4 AASHTO T99, T134, T135, T136, T180, T193; NLT 107/98, 108/91, 111/87

PRS-ZE0620 Automatic Soil Compactor is designed to compact specimens automatically and uniformly, assuring conformity with the above listed international standards.

The principle of the design is to allow the hammer to drop the required height into the soil in the mould which rotates circularly to distribute the blows uniformly over the surface of the specimen in the mould. The drop height is adjustable to 300 mm, 305 mm, 450 mm and 457 mm.

The rammer is circular faced and interchangeable to 50 mm or 50.8 mm diameter. Rammer weight is adjustable to 2.5 kg or 4.5 kg according to reference standard. When compacting 100 mm diameter specimens the unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates on iner and outer radius to obtain even compaction.

The number of blows per layer can be set at the beginning of the compaction process by the digital counter according to the standard preferred by user. This automatic blow pattern ensures effective and equal compaction for each layer of soil by rotating the base table, so the mould, in equal steps and travelling the rammer across the mould. User defined blow number and in-out distribution is also available.

Compactor is equipped with programmable digital counter which allows the machine;
â?¢ To select reference standard ( number of blows and mould size ) by the operator at the beginning of the test.

â?¢ To set desired compaction cycle ( number of blows and count of the number of inner and outer drops) by user.

Rammers

EN / BS Circular faced, 50 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

ASTM Circular faces, 50.8 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

Drop Height

BS Adjustable to 300 mm or 450 mm

ASTM / AASHTO / EN Adjustable to 305 mm or 457 mm

The Automatic Soil Compactor is supplied complete with;
â?¢ ASTM/EN/BS Rammer
â?¢ ASTM Rammer Face, Ã? 50.8 mm.
â?¢ EN/BS Rammer Face, Ã? 50 mm.

Dimensions 650x550x1550 mm

Weight (approx.) 150 kg

Power 370 W

We can manufacture foam pattern and cast parts for automotive metal sheet producer in any kind of material.