- using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier.
- reinforced with special fiberglass scrim for higher mechanical product strength.
- special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties.
- resistance to moisture, mold and fungi.
- no change of performances over time due to compaction, disintegration or moisture absorption.
- light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability.
- no crumbling material / non-itchy - eco friendly.
- characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate.
Packaging: 1.22m x 45m in roll form in pallet
1.22m x 60m in roll form in pallet
- double sided aluminum foil (99% of pure aluminum foil) reinforced with fiberglass scrim.
- certified for fire retardant class 'o' (bs476 part 6 & part 7). Impermeability to moisture & vapor maintains even when creased.
- characteristics of these product are not easily changed by hot roof temperature/high humidity of tropical climate & is stable & will not delaminated when exposed to moisture from hvac ducting.
Packaging: 1.22m x 45m in roll form in pallet
1.22m x 60m in roll form in pallet
Two-wave, or three-wave highway safety crash barriers (option: u post, c post, i beam post, and h beam post etc. )
Ce, iso approved, galvanizing or powder coating available, customer design accepted.
Thickness & classification for safety crash barriers: a1/2.67mm, a2/2.67mm, b1/3.43mm, b2: 3.0mm.
Jt/t 281-1995, aashto m-180, ral-rg620, sps98s, or any other international standards for crash barriers.
Base steel grade q235b (equivalent to s235jr / din en10025 and gr. D / astm a283m).
Thichness of 3mm, 4mm, 6mm, or custom sizes are availabe for safety barriers, providing different highway road security requirements.
Hot dip galvanized or pvc coating for road barrier surface treatment.
Galvanizing thickness 70um for crash barriers, or according to your request
Two-wave w beam highway guardrails, three-wave highway guard rail (option: u post, c post, i beam post, and h beam post etc. ).
Ce, iso approved, galvanizing or powder coating available, customer design accepted.
D areas.
The guardrail absorbs sudden impact during collision thus minimizing injury to vehicle and passenger.
Act as a directional safety railing for vehicles moving in the right direction.
To act as a protective barrier for pedestrians along highways.
Small padded trauma bag
The smaller version of the large padded trauma bag has one moveable divider inside to help you organize your supplies. The two large zippered end pockets have reflective stripes. The front pocket has elastic loops, pockets inside and unzips to lay flat for easy access. This bag provides waterproof protection for your equipment and easy clean up. Main body 8" x 10"x 11.5", end pockets 8" x 6" x3", overall length 17.5".
Overall plate structure, the box materials using standard 304 stainless steel, double waterproof treatment.Can be installed in indoor, outdoor with shed, applicable to restrict the passing rate of the place, has the count, attendance, current limiting funtion
Feature of the product:
1. Stainless steel box, box-type bevel shape, novel and beautiful, durable.
2. Waterproof, sunscreen, anti-temperature, anti-cold.
3. Access Prompt function:Red and green light prompt the passing information.
4. The programmable gates control state, with a variety of operating modes you can choose, you can set a one-way or two-way control
5. Compatible IC, ID, magnetic card, bar code card, and other control equipment.
6. Power failure emergency function after power channel automatically open, closed automatically after power-on, to meet the special needs of the user and the fire safety requirements
7. The control panel with counting function, LED digital display function (optional)
8. The standard input and output interface, is the best choice for system integrators
9. With automatic reset function, gate, not prevailing within the stipulated time, the system will automatically cancel the access permissions of the user.(the standard is gate turns on 5 seconds will be automatically reset)
10. Pinch, anti bumps function, Blockage when in the process of the swing arm reset within a predetermined time, click stop working automatically, the default reset again after a delay, and the intensity is very small(2kg)
11. Sound, light alarm function: with trespassing, trailing alarm
12. Scour protection function ,when the gate signal is not received, the stick is automatically locked
13. Fault detection and alarm function, user-friendly maintenance and use
Technical:
1.Structure: frame structure/standard stainless steel shell
2.Production: full CNC laser cutting machine production
3.Dimensions: length 1400 ¡Á width 330 ¡Á height 1000 (mm)
4.Stainless steel thickness:1.5mm
5.Maximum channel width :550-600mm
6.Weight: 140Kg
7.gate opening time: 0.2 seconds
8.prevailing speed: 30 people / min
9.Communication Interface: Standard RS485 interface, distance ¡Ü 1200 meters or TCP / IP
10.Power: 50W
11.Power supply voltage: AC220 ¡À 10% V, 50HZ
12.drive motor: brushless DC motor (24V)
13.normal life: 3,000,000
14.LED indicator: 2
15.reader windows: 2
16.access speed :30-40 / min
17.power on the prevailing state required time: 3 seconds
18.failure automatically reset after time: 10 seconds
19.input interface: dry contact signal or +12 V level signal or pulse width ¡Ý 100ms DC12V pulse signal, driving current ¡Ý 10mA;
20. Working environment: indoor, outdoor (with shed)
21.Temperature: -10 ¡æ ~ 50 ¡æ Relative humidity: ¡Ü 90%, no condensation
1. High retro-reflectivity and wide-angle visibility, the reflective distance reach to 500 meters the yellow reflectivity can reach to 686cd/(1 O), which is exceeding more than 1 times of the standard (GB25990-2010): 300cd/(1 O) the red reflectivity can reach to 155cd/(1 O), exceeding 15 times of the standard.
2. Putting the red color into the imported specific micro-prismatic reflective film, which is using for manufacturing professional Vehicle Rear Reflective Marking Plate, so as to make the plates have the capabilities of anti-dust-impact for the reason of external pressure.
3. Keeping high visibility at nightfall and in rain and fog, in order to avoid collision.
4. The reflective sheeting is adopting single-layer structure, and having good capabilities of waterproof, dustproof and anti-impact.
5. Having good capability of anti-aging and smooth surface, and the guarantee period is more than 7 years.
Installation Requirements:
1. The surface should be easy to clean and not rough
2. It should be screwed or riveted to fix the plates stably and on the rear part of vehicle
3. Installation Height: 250mm (bottom edge) H 2100mm (top edge
4. The size of each plate: 735c O S 1725c O.
1. High retro-reflectivity and wide-angle visibility, the reflective distance reach to 500 meters the yellow reflectivity can reach to 686cd/(1O), which is exceeding more than 1 times of the standard (GB25990-2010): 300cd/(1O) the red reflectivity can reach to 155cd/(1O), exceeding 15 times of the standard.
2. Putting the red color into the imported specific micro-prismatic reflective film, which is using for manufacturing professional Vehicle Rear Reflective Marking Plate, so as to make the plates have the capabilities of anti-dust-impact for the reason of external pressure.
3. Keeping high visibility at nightfall and in rain and fog, in order to avoid collision.
4. The reflective sheeting is adopting single-layer structure, and having good capabilities of waterproof, dustproof and anti-impact.
5. Having good capability of anti-aging and smooth surface, and the guarantee period is more than 7 years.
Installation Requirements:
1. The surface should be easy to clean and not rough
2. It should be screwed or riveted to fix the plates stably and on the rear part of vehicle
3. Installation Height: 250mm (bottom edge) 2100mm (top edge
4. The size of each plate: 735cS, 1725cO.
1. Model No:TA-1-5B
2. Size:105*105*25mm
3. Weight:0.4kgs
4. Solar cell Type:Mono crystalline
5. Battery Type:Anti-heat Ni-MH
6. Circle life:over 3-5 years
7. Working temperature:-20c+70c
8. LED frequency:2Hz or Steady or 2Hz or at customers' request
9. Size: 5mm
10. Number:3 PCS
11. Color:White/yellow/red/blue/green
12. Luminous intensity:Over 5000 mcd
13. Control circuits:IC
14. Output on full charge (single-side):72 hours blinking lighting and 48 hours constant lighting,no sun input
15. Time to full charge:8 hours in 100Klux (sunny day)
16. Compression resistance:over 30 Tons
17. Starting intensity:500 LUX
18. Application situation:Edge line
19. Life in use:5 years
20. Warranty:1 year
21. Material of body shell:aluminum alloy
22. Material of solar panel shell:PC
23. Material of LED shell:PC
24. Material of body inside:Epoxy glue
25. Water proof:IP68
26. View distance:over 1000m.
360 Degrees Solar Photoelectric Road Mark
Model: PCB-001/PCB-002
Patent No.: ZL2009 2 0175906.1
Product features:
Brand: Cityeye
Power supply: 3V 315Mw PCB-001-flash/3V 480Mw PCB-002-constant , solar cells (single crystal silicon)
Energy storage device: 2*1.2v/1200mAH NI-Mh high Temperature rechargeable battery
Service time: Under the positive standard light intensity it is able to work for>160h(flash)/>60h(constant)Consecutively after it is charged for 8h in a single pass
Display mode: 360 degree warning,Flashing (1.33HZ 5%) and constant a
Display color: Red,Yellow, Blue, White and Green
Displayer element: Piranha ultra bright mist-resistant LED 3500~14000 MCD
Body material: slip-proof extra strength plastic PC,bottom side package by polyepoxide,resist corrosion of wateroilCCl4UVand chemical substances
Visual distance: 300 M
Valid Service life: 5 years
Protection level: 100% waterproof
Operating environment: -20~ +70ìNi-Mh-40~ +85ìsuper capacitor
Start control light intensity: light illumination less than 50 Lux from the positive side
Specification: 100 Diameter * 58.5 High * Cateye Diameter 60 * Pavement elevation 19mm
Anti-pressure capability: static pressure 35tafter contruction,resist impact by automobile wheels
Pape box: 102 * 102 * 60 mm, 1pcs/box
Size of external box: 520*420*325 mm,100pcs/Ctn
Weight: 343 g/pcs
Net weight: 36.4 Kg
Gross weight: 38.0 Kg
Warranty : 14 months
Superiority: Green energy saving,ease of installation, does not destroy the landscape, roads and walls can be construction,warm brightness,employs highly effcient solar panel,top of the line rechargeable batteries.
Pape box: 102 * 102 * 60 mm, 1pcs/box
Size of external box: 520*420*325 mm,100pcs/Ctn.
360 Degrees Solar Photoelectric Road Mark
Model: PCB-001/PCB-002
Patent No.: ZL2009 2 0175906.1
Product features:
Brand: Cityeye
Power supply: 3V 315Mw PCB-001-flash/3V 480Mw PCB-002-constant , solar cells (single crystal silicon)
Energy storage device: 2*1.2v/1200mAH NI-Mh high Temperature rechargeable battery.
Service time: Under the positive standard light intensity it is able to work for>160h(flash)/>60h(constant)Consecutively after it is charged for 8h in a single pass.
Display mode: 360 degree warning,Flashing (1.33HZ 5%) and constant a
Display color: Red,Yellow, Blue, White and Green
Displayer element: Piranha ultra bright mist-resistant LED 3500~14000 MCD
Body material: slip-proof extra strength plastic PC,bottom side package by polyepoxide,resist corrosion of water,oil,CCl4,UVand chemical substances
Visual distance: 300 M
Valid Service life: 5 years
Protection level: 100% waterproof
Operating environment: -20 ~ +70Ni-Mh,-40 ~ +85super capacitor
Start control light intensity: light illumination less than 50 Lux from the positive side
Specification: 100 Diameter * 58.5 High * Cateye Diameter 60 * Pavement elevation 19mm
Anti-pressure capability: static pressure 35tafter contruction,resist impact by automobile wheels
Pape box: 102 * 102 * 60 mm, 1pcs/box
Size of external box: 520*420*325 mm,100pcs/Ctn
Weight: 343 g/pcs
Net weight: 36.4 Kg
Gross weight: 38.0 Kg
Warranty : 14 months
Superiority: Green energy saving,ease of installation, does not destroy the landscape, roads and walls can be construction,warm brightness,employs highly effcient solar panel,top of the line rechargeable batteries.
Pape box: 102 * 102 * 60 mm, 1pcs/box
Size of external box: 520*420*325 mm,100pcs/Ctn.
Permanent road marking tape(L501 series)
Feature Products
self adhesive, reflective,anti-slip, easy & quick of installation
Product Description
Permanent ,durability
Brand:CL
Product Description
L5011X is our Reflective Grade permanent pavement marking tape which is self-adhesive.
Main Features: containing glass beads for good reflection and skid proof effect; rapid and easy installation;
Main Compositions: flexible polymers + pigments + micro glass beads;
Application: long-term (over 2years working life )for use on various pavements of concrete, asphalt, cement and marble.
Regular colors: white, yellow, blue, black, red, green, orange
Regular roll size: 1m*40m/roll; can be cut into smaller rolls like 5cm, 10cm, 15cm, etc wide upon request.
Regular thickness:1.6-2.2mm
It is also a material can be made into various road lines, arrows, symbols, preformed pavement markings, logos, 3D markings etc.
We also offer L5010X Reflective Grade without adhesive which can be cut into small square glued on rubber products.
Related words: pavement marking tape, reflective marking tape, temporary marking tape, permaenent marking tape, removable marking tape, roadway tape.
Temporary road marking tape (L102 series)
Feature Products
With smooth surface and easy to be clean up, easy and quick of installation, removable no damage road surface
Product Description
*Repair construction area / Temporary pavement work area.
*When there is a need of re-work
*When there is a need to change the traffic flow
*When indicated for short period of time
Brand: "CL" brand
Compositions: Flexible polymers, pigments
Feature: It is temporary pavement marking tape rolls. The tape passed special technical process which is smooth and easy to be clean up by water or wet mop.
It is applicable to various pavements of concrete, asphalt,cement, marble and walls. It can be designed and made into various road lines, arrows, words, symbols,.It can be used on road,car park,subway,station,airport.
Maximum width: 1 m
Common width: 5cm, 10cm, 15cm, 20cm, 45cm, 50cm and 100 cm
Common length: 40 m
Thickness: 1.3-1.8 mm, customization is available.
Preformed markings
Brand:CL
Product Description
B3011X is our Preformed markings which is strong self-adhesive & reflective,we can offer pavement traffic sign & pavement advertising.
Main Features: containing glass beads for good reflection and skid proof effect; rapid and easy installation;
Main Compositions: flexible polymers + pigments + micro glass beads;
Application: up 2 years working life use on various pavements of concrete, asphalt, cement and marble.
Regular colors: white, yellow, black, red,blue,green,orange, can be match to colorful sign.
Regular size: We offer circle, square, triangle traffic sign, size & design upon customerí»s request.
Regular thickness:1.6-2.4mm.
Carton, 30cm*30cm*32cm.
762 Traffic Safety Devices Suppliers
Short on time? Let Traffic Safety Devices sellers contact you.
