Adopt latest CT technology and integrated mask digital technology
Wireless transmission distance 30m, can transmit through building barriers
Integrated design ensures uninterrupted year-round high precision, high reliability and high stability test.
Have peak value maintaining, data maintaining, data memory function
Easy to install and remove with power on
Insulation rod has the characteristics of moisture resistance, high temperature resistance, impact resistance, bending resistance, high insulation and scalability.
Can accurately measure 0.00mA-1200A current or leakage current
Can test high and low voltage changing ratio, respectively test the first loop and secondary loop high and low voltage current, and then obtain the voltage change through manually calculation.
PARAMETERS
Electrical parameters
Power supply Ammeter: DC6V Alkaline Dry Battery (1.5V AAA X 4),
Receiver: DC7.5V Alkaline Dry Battery (1.5V AA X 5),
working 10 hours
Test mode Clamp CT, integral approach
Transmission mode Wireless transmission, the maximum distance of straight line transmission is about 30m
Display mode 4 bit LCD display, with backlight function
Sampling rate 2 times/second
Measurement scope 0.00mA-1200A (50/60Hz automatic)
Resolution 0.01mA
Shift 0.00mA-1200A automatic shift
Accuracy (23±5C, below 70%RH) 0.000mA-120.00A: ±1%±3dgt
120.00A-1200.0A: ±1%±5dgt
Line voltage Below 69KV line test (with 5 insulation rods operation)
Data memory 99 sets
Automatic shutdown 15 minutes after boot
Battery voltage
TEST-200 200A primary current injection test kit adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with current meter; it can show primary current value, second current value, the action time and voltage value. Packing is used as aluminum alloy body with PC panel. LCD screen display single-phase protective relay test device of voltage and current output stopwatch; a full isolation, adjustable AC and DC voltage, AC direct current; an adjustable DC voltage and an adjustable AC voltage; output circuit with double overload protection, high output capacity, small size, light weight, high reliability.
PARAMETERS
Electrical parameters
Accuracy ±0.5%
Power Supply(AC) 220V±10%·2000VA, 50Hz/60Hz or
110V±10%2000VA, 50Hz/60Hz
Current Output (AC) 200A5V or 100A10V
Capacity 2KVA
The current output waveform distortion 5%
Dual protection overload electronic protection and software protection
Primary current
Range 0-250A
Resolution 0.1A
Accuracy
GF1061 portable CT PT analyzer is mainly used for field or lab testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt 7 inch touch TFT LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data. The CT PT Analyzer is the most complete and easy-to-use testing system for protection and metering CTs according to IEEE and IEC standards.
TEST-905 primary current injection test system adopts ARM chip to control the output process and large capacity of toroidal transformer. It is equipped with LCD screen display current meter, also showed primary current value, secondary current value, turn ratio and the phase shift. Aluminum alloy body with PC panel component the shell.
TEST-905 is mainly applied to test CT turn ratio and polarity in the power system, the contact resistance, high voltage circuit breaker protection test and high voltage generator test etc, which need large current on-site or in the lab.
TEST-902 primary current injection test set adopts ARM chip to control the output process and large capacity of toroidal transformer. It is equipped with LCD screen display current meter, also showed primary current value, secondary current value, turn ratio and the action time. Aluminum alloy body with PC panel component the shell.TEST-902 is mainly applied to test CT turn ratio in the power system and the contact resistance etc, which need large current
19229 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
TEST-901 primary current injection test set adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with LCD display and current meter; it can show primary current value, second current value, turn ratio and the action time. Packing is used as aluminum alloy body with PC panel. TEST-901 is mainly applied to CT turn ratio testing in the power system and contact resistance test which need large current.
GF106 CT/PT TESTER is mainly used for field testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.
These r the features of cutter pumps
1.Pumps can be used in more than 30 fields such as septic pond drainage, fish pond silt removal, sewer engineering drainage, lotus pond silt removal, etc.
2.After 40 machining procedures, the high-quality national standard water pump with strong output power and three-phase machine which is phase-free and burn-free
is produced.
3. In order to avoid damage during transportation all grinder pumps adopt 2 protection packaging.
4. To ensure quality the pumps are inspected by at least 5 departments from production to storage.
5.Cut 34200 times a minute, greatly reducing the probability of internal blockage.
6The thermal element is embedded in the stator winding to protect motor automatically
Fully automatic apparatus
Dynamic display test process
Small sample size, short time test
Standard ASTM D5191
Scope Determine the total vapor pressure of air-containing, volatile liquid petroleum products,
Characteristic
Embedded operation software, touch display screen
Fully automatic operation, eliminate errors introduced by human operation
Self-diagnostic function, dynamic display test process
I/O Port: COM port and Ethernet for LIMS; USB port for flash memory
Large store memory, history results enable to be searched and printed out.
Sample inlet can be sealed automatically, patented auto drain out waste liquid design
Only 3ml sample need for each test
Around 7 minutes for each test
Main parameters
Test range0KPa -200KPaprecision: 0.1KPa
Temperature display range-50ï½?75
Temperature control precision37.8±0.1
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically.
Characteristic:
1. Igniting method can be by electricity and gas option.
2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display.
3. Display test status in real time
4. Set the expected flash point, the highest flash point, ignition times, detection sensitive
5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure
6. Automatic lifts arm to the complete upright position after testing
7.Easy to remove the detection device by hand, and easy to repair and clean
8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
Wire Bristle Scratcher
Scratchers remove excessive wall cake and improve the cement bond between the casing and porous formations while reinforcing the cement column. Their hinged design makes them easy to install. For running in the hole, a series of scratchers is mounted on the casing string. The inclined external bristles abrade the wellbore during running and reciprocation. The
Zhongshi export casing centralizer, PVC centralizer, float equipment, aluminum spiral vane solid rigid centralizer, composite centralizer and bow spring centralizer etc. We would like to faithfully cooperate with friends from all circles.
scratchers feature large fluid-bypass slots and coiled bristles for bending durability.
Buy low price, high quality Cementing Basket, Slip on Cement Basket, Canvas Cement Baskets, Stage Collar and Linger Hanger etc.
Zhongshi sells stop collar, wire bristle scratcher, wellbore cable wiper, hinged stop collar with spiral nails and hinged stop collar with set screws etc. We always insist on the implementation of â??consolidating the Central Plains, reaching out to the world.
Stage Cementing Collar Hydraulic Type (Two Stage)
Stage Cementing Collar Hydraulic Type (two stage)
Hydraulic Stage Cementing Collar is a field-proven stage tool that meets the challenges of cementing holes at any angle with a hydraulically opened port system. It is specifically designed for horizontal sections / formations, the multistage cementing tool can be placed anywhere in the casing string. It is PDC-drillable and field-adjustable shear pins system.
When the first-stage shutoff plug lands on the shutoff baffle, increased internal casing pressure hydraulically opens the stage tool, enabling circulation and then second-stage cement to pass though the ports into the annulus above the tool. The closing plug when released, wipes the casing ID clean of cement before bumping on a closing seat. Increased pressure shifts the closing seat downward, releasing locking lugs and closing the tool. A snap ring locks the sleeve in position, ensuring the stage tool remains locked.
With 12 years export experiences, our stage collar, stage cementing collar hydraulic type, cementing basket, linger hanger and cementing plug has been welcomed in international markets.
Stage Cementing Collar Mechanical Type (two stage)
Stage Cementing Collar is used to effectively cement upper sections of the casing string after displacing cement around the lower section. The Multiple Stage Cementing Collar provides a means of opening and closing port holes for cement displacement and positive containment of the cement after displacement. All internal parts are easily drilled, and are firmly held from rotating during drilling. The port closing sleeve is positively locked in position after cementing. After running the Collar to setting depth, the lower section is cemented in the conventional manner except the cement is displaced with the flexible cementing plug furnished with the collar. This is bumped against the shutoff Baffle. A slight pressure build-up of 300-400 P.S.I. will assure plug is seated in Baffle.
The port holes in the Multiple Stage Cementing Collar are opened for doing the second stage by dropping the trip bomb and applying approximately 800-1000 P.S.I. pressure. The second stage is displaced with the closing plug which is also furnished with the Tool. When the closing plug bumps approximately 800-1000 P.S.I. pressure will close the port holes.
Item No. RBWFJK0287
Car Make For Jeep Wrangler Jk 2007-2015 model
Material ABS Plastic
Colour Textured black
Installation Easy to install, with all fittings, seal rubbers, screws
Surface Finish Textured
Packaging Normal Export Carton
Free logo printed Available
Details.
ROADBON4WD Pocket Fender Flares give your truck the pocket/bolt aggressive look. These fender flares are the preferred choice for truck owners.
1. Drill installation - all necessary hardware are included
2. Everything you need for installation - Comes with rubber gasket seal for between flare & fender to protect paint
3. Smooth or Textured available
4. Lowest painted price delivered - Affordable price for a high quality flare that beats most leading brands
5. Comes with a warranty - Backed with a manufacturer's warranty
6. OEM- OEM logo is welcomed.
Application.
The Pocket Style Fender Flare Kit is specifically designed for use on 2007To 2015 Jeep Wrangler JK 2&4 doors models.
Installation.
The Fender Flares is an easy at home installation. For additional information, please contact us.
Warranty.
Our company will warrant any part during the warranty period which proves defective in material and/or workmanship under normal installation,
use, service or maintenance. Return alleged defective part to the place of purchase for replacement or refund. Please have a copy of your purchase
