Find Verified Titanium Rod Suppliers, Manufacturers and Wholesalers

Titanium dioxide, also called titania, (TiO2), is a white, opaque, naturally occurring mineral existing in a number of crystalline forms, the most important of which are rutile and anatase. These naturally occurring oxide forms can be mined and serve as a source for commercial titanium.

Metal Rods

Copper Rods

Formwork Accessories

Tie Rod

SV Trade is a leading Supplier & Exporter of different different types of Wire Rods, according to appropriate standards/Specifications as well as customer specifications in a large variety of steel grade and dimensions. Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request.

SV Trade is a leading supplier & Exporter of different different types of Wire Rods, according to appropriate standards/ Specification as well as customer specifications in a large variety of steel grade and dimensions. Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request.

Titanium 2.0 Four Stroke Engine Oil for Bike 20W40

Nitco Titanium 2.0 Synth 4-T is a premium 4-stroke engine oil company (SAE 20W40) formulated with Protective Synthetic Chemistry for high-performance two-wheeler engine oil. It ensures strong lubrication, total engine protection against rust and corrosion, and reduced wear across a wide temperature range, ideal for new-generation air-cooled 4-stroke engine oil motorcycles. Nitco Lubricants a reliable bike engine oil manufacturer ensures high-quality two-wheeler engine oil for smooth performance and engine protection. Choosing a reputed engine oil company helps reduce friction, enhance fuel efficiency, and extend engine life. Whether for daily rides or long journeys, premium engine oil keeps your bike running efficiently and reliably.

Specification & Properties

CHARACTERISTIC VALUE
Flash Point, C (CoC) Min. : 230
Pour Point, C Max -30
Viscosity Index, Min. 120
Kinematic Viscosity cst @100 C 12.5-16
TBN, Mg, KOH/g 8-9

Features
Ensures superior lubrication and engine protection, especially under high-stress conditions.
Creates a robust oil film that shields engine components, reducing wear and tear.
Formulated to guard against rust and corrosion, extending engine life.
Performs consistently across a broad range of temperatures, ideal for varying weather conditions.
Minimizes wear even in demanding, high-temperature environments, perfect for new-generation air-cooled motorcycles.

Available Pack Size : 800ml | 900ml | 1ltr | 1.2ltr | 2.5ltr | 20ltr | 50ltr | 210ltr

Nitco Titanium 2.0 Synth 4-T is a premium quality 4 stroke engine oil (SAE 20W40), formulated with Protective Synthetic Chemistry, specially developed to meet the requirements of high performance 4 stroke for two wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled. new generation 4 stroke motorcycles

SPECIFICATIONS Ei PROPERTIES
CHAAACTEAISTIC VALUE
Flash Point, C (Coe) Min 230
Pour Point, C Max : -30
Viscosity Index, Min : 120
Kinematic Viscosity cSt @100 C : 12.5-16
TBN, Mg, KOH/g 8-9

FEATURES
1. Total engine protection viz protection from rust, corrosion, high temperature. wear & tear etc.
2. Reduced exhaust emission
3. Cost effective due to long drain period and reduced engine

PACK Sl2E : 800ml, 900ml, lltr., 1.2Ltr, 2.Sltr., 20Ltr., S0Ltr. and 210Ltr.

Ptfe rods

Product range of ptfe rods, sheets and hollows:
Rods : extruded - diameter 3 to 200, length 1000 / 2000
Molded - diameter 20 to 775, length 300
Psheets : skived - thick 0.05 to 5, width 300 to 1800
Molded - thick 1 to 150, area 300 x 300 to 1500 x 1500
Hollows : skived - od 10 to 150, id 4 to 100, length 1000
Molded - od 25 to 1440, id 10 to 1420, length 300
Other made-to order sizes on request


As per as product

Adjustable U head Jack Rod with Nut

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING MATERIAL
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK
HIGH WEATHERING RESISTANCE
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

EXTRUDED RODS - 1 TO 5 Dia X Long Spools
6 TO 25 Dia X 1000 OR 2000 L
30 TO 200 Dia X 1000 L
PRESSED RODS - Available in the above sizes in 300 L
PRESSED SHEETS - 4 TO 100 Thick X 10002 / 12002 /15002
4 TO 100 Thick X 1000 X 2000 Special Production with MOQ
SKIVED SHEETS - 0.2 TO 6.O Thick X 1000 / 1200 / 1500 / 2000 Wide X Long Rolls
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID , 1000 / 2000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID , 100 / 200 / 300 L
ONE-SIDE SODIUM ETCHED PTFE SHEETS - Available in all sizes
CUSTOM SIZES - Rods, Sheets, Hollows available on Request with MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 5 Dia
MACHINED CIRCULAR PARTS - 5 TO 1200 Dia

TECHNICAL DATA SHEET

PROPERTY â?? STANDARD - VALUE

Density - ASTM D792 - 2.16 - 2.20 g/ cubic centimeter
Water Absorption - ASTM D570 - Less than 0.01 %
Tensile strength - ASTM D638 -greater than or equal to 200 kg/ square centimeters
Elongation - ASTM D638 - greater than or equal to 300 %
Impact strength, Izod,23 Degree Celsius - ASTM D256 - 1.6 J/cm
Hardness - ASTM 785 - 50 - 55 Shore D
Compressive strength at 1% def. - ASTM D695 â?? 40 - 50 kg/ square centimeters
Thermal conductivity - ASTM D2214 - 0.2 W/m. K
Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831 - 16 x 1-5 Degree Celsius -1
Volume resistivity, at 50% RH - ASTM D257 - greater than or equal to 1018Ohm cm
Surface resistivity , at 50% RH - ASTM D257 - greater than or equal to 1017Ohm
Dielectric strength - ASTM D149 - greater than or equal to 55 KV/mm
Safe Operating temperatures - 50 to 200°C(biological, pharma, food applications)
- 50 to 260°C(Non-bio/food/ pharma applications)
Coefficient of friction, static - ASTM D3028 - Less than 0.09
Coefficient of friction, dynamic - ASTM D3028 â?? Less than 0.05
Moisture / solvent absorption - Negligible
Combustibility - Non-combustible
Weather resistance - Excellent
Chemical resistance - Excellent, except for highly fluorinating agents

Grades.
Classic (split)
Royal (rod/cigar)

Metal rod that is threaded throughout the entire length of the rod. It's typically made from carbon, zinc coated or stainless steel. The threading allows for bolts and other types of fixings to be fastened onto the rod to suit many different construction applications.

IMPROVED HARDNESS OVER VIRGIN PTFE
EXCELLENT WEAR RESISTANCE OVER VIRGIN PTFE
HIGH COMPRESSIVE STRENGTH
EXCELLENT OILFREE SLIDING MATERIAL WITH LOW FRICTION
EXCELLENT OILFREE BUSHING & PISTON RING MATERIAL
SOME GRADESBIOSAFE AND INERT
REDUCED CREEP

Dimensions in mm

EXTRUDED RODS - 5 TO 100 X 1000 L
PRESSED RODS - 25 TO 300 DIA X 300 L
PRESSED SHEETS - 4 TO 100 THICK X 10002 / 12002 /15002
SKIVED SHEETS - 0.25 TO 3.O THICK X 1000 / 1200 / 1500 X LONG ROLLS
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID X 1000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID X 100 / 200 / 300 L
CUSTOM SIZES - RODS, SHEETS, HOLLOWS AVAILABLE ON REQUEST WITH MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 10 DIA
MACHINED CIRCULAR PARTS - 10 TO 1200 DIA
MACHINED SQUARE / RECTANGULAR PARTS - 5 X 5 TO 1000 X 2000 / 1500 X 1500

TECHNICAL DATA SHEET
PROPERTY - STANDARD â??
25% Glass Fiber filled -
25% Carbon filled -
60% Bronze filled -
15% Graphite filled

Density - ASTM D792 -
2.25 g/cubic centimeter
2.08 g/cubic centimeter
3.85 g/cubic centimeter
2.10 g/cubic centimeter

Water Absorption - ASTM D570 -
Less than0.02 %
Less than0.05 %
Less than0.03 %
Less than0.05 %

Tensile strength - ASTM D638 -
Greater than 140 kg/square centimeters
Greater than 120 kg/square centimeters
Greater than 170 kg/square centimeters
Greater than 120 kg/square centimeters

Elongation at break - ASTM D638 -
Greater than 300 %
Greater than 80 %
Greater than 110 %
Greater than 150 %
Impact strength, Izod, 23 Degree Celsius - ASTM D256
-
-
-
-
Hardness - ASTM 785 60 -
62 Shore D
60 - 63 Shore D
65 - 70 Shore D
55 - 60 Shore D

Compressive strength at 1% def. - ASTM D695 -
80 - 90 kg/square centimeters
55 - 65 kg/square centimeters
110 - 120 kg/square centimeters
50 - 60 kg/square centimeters

Thermal conductivity - ASTM D2214 â??
0.36 W/m. K
0.53 W/m. K
0.76 W/m. K
0.44 W/m. K

Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831
11.0 x 10-5 Degree Celsius -1
12.5 x 10-5 Degree Celsius -1
8.5 x 10-5 Degree Celsius -1
12.5 x 10-5 Degree Celsius -1

Volume resistivity, at 50% RH - ASTM D257 -
Greater than 1015Ohm cm
Greater than 104Ohm cm
Greater than 107Ohm cm
Greater than 1011Ohm cm

Surface Resistivity - ASTM D257 -
Greater than 1016 Ohm
Greater than 103 Ohm
Greater than 109 Ohm
Greater than 1012 Ohm

Dielectric strength - ASTM D149 -
Greater than 35 KV/mm
-
-
-
Safe Operating temperatures
-
- 50 to 200 Degree Celsius (biological, pharma, food applications) - 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)

Coefficient of friction, static - ASTM D3028 -
Less than 0.16
Less than 0.15
Less than 0.16
Less than 0.10

Coefficient of friction, dynamic - ASTM D3028
Less than 0.13
Less than 0.11
Less than 0.13
Less

Glaucoma Set

Forcep

Phaco Set - Set of 6 Instruments

Folders / Inserters

Surgical instruments

Proprerties:
Appearance : buff coloured powder
Bulk density : 0.9 gm/cc
Average particle size : 1 micron
Water solubility : 1 %
Specific gravity : 3.65 3.80
Chemical resistance : to acid
Specifications:
Tio2 content : 92 % (min)
Iron as fe2o3 : 4 %
Oil absorption phr : 30 %
Moisture content : 1 %
Loss on ignition : 1.00 %
Colour value : l : 80 (min) a : 4.0 (max) b : 18.0 (max)
Packing: material is packed in 25 kg capacity hdpe bags. Handling is to be done carefully to avoid generation of dust.
End users
Paint industry in all shades except pure white and a few bright shades.