Find Verified Titanium Plate Suppliers, Manufacturers and Wholesalers

Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%

â?» Porosity and Size can be customized.



Technological Process

Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL


Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.


Applicantion

1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.

Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.

Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%

â?» Porosity and Size can be customized.



Technological Process

Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL


Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.


Applicantion

1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.

1. We are a professional production of titanium and titanium alloy sheet manufacturers, supply various grades of titanium alloy sheet, can be cut according to your needs, you can contact us at any time to quote. 2. The thickness of our spot material is from 0.5 mm to 200 mm, which can be cut according to your requirements. You can contact us for the price. 3. We provide product processing services, you can contact us to send drawings, we can process products according to your requirements.

1. We are a professional production of titanium and titanium alloy sheet manufacturers, supply various grades of titanium alloy sheet, can be cut according to your needs, you can contact us at any time to quote. 2. The thickness of our spot material is from 0.5 mm to 200 mm, which can be cut according to your requirements. You can contact us for the price. 3. We provide product processing services, you can contact us to send drawings, we can process products according to your requirements.

There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits.

Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v.
https://www.yunchtitanium.com/titanium-sheet-1

Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Moderate Strength Titanium Excellent Cold Formability Excellent Weldability Excellent Resistance to High Oxidation
Titanium Alloy Grade 12 has outstanding corrosion resistance and a combination of high strength and low density, with good ductility. Small additions of nickel and molybdenum have been made to this alloy resulting increase in corrosion resistance and high strength. It is particularly suitable for use in mildly reducing conditions, or where conditions vary from oxidising to reducing.
1). Processing method: cold-rolled, hot-rolled
2). Surface bright, polished, pickling, sand-blasted...
3). Standard: ASTM B265, ASME SB265...
4). Thickness:0.02~60mm
5). Width:50~3000mm
6). Length:1000~6000mm

TITANIUM PLATE

TITANIUM BAR

TITANIUM PIPE

FLANGE

FORGING

Titanium plates

Commercially pure, alloy, and eli grade titanium plate and sheet
*commercially pure titanium plate
Available up to 3000mm wide x 6000mm long or cut to size
Thickness from 5mm to 80mm
*titanium alloy plate and 6al-4v eli plate
Available up to 1800mm wide x 3000mm long or cut to size
Thickness from 5mm to 80mm
*commercially pure titanium sheet and alloy sheet
Available up to 1000mm wide x 2000mm long or cut to size
Thickness from 0.5mm to 5mm standard:astm b265 mil-t-9046j ams 4911h ams 4914 dms 1592f din 3.7*** gb/t 3620.1-94 gb 3620.2-94



Seaworthy wooden case

Quick details

Place of origin:
Shaanxi, china (mainland)
Application:
Industry, industry
Thickness:
0.5~80
Width:
1000~2000, 1000~2000
Length:
2000~6000, 2000~6000
Technique:
Cold rolled
Grade:
Gr1
Ti (min):
99.6%
Brand name:
Oy
Model number:
Titanium plate for electrolysis
Name:
Titanium plate
Moq:
1kg
Certification:
Ce, iso9001, sgs
Surface:
Polished
Material:
Titanium

Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields.
Material: titanium
Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm
Precision:0.2 to 65um

Cdm titanium plate/sheet/coil/foil

1.Titanium plate/sheet
Thickness:0.5mm-150mm maximun width:2500mm maximum length:12000mm
Ams 4911:gr5(t-i-6al-4v)for aerospace ams4916:ti-811, ti-15333 for military
Astm b265, asme sb265:gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17 for industrial

2.Titanium coil
Astm b265, asme sb265:gr1, gr2 for industrial use
Astm f67:gr1, gr2, etc.For medical astm f136 gr5(ti-6al-4v) for medical use
Thickness:0.5mm-3.0mm maximum width:1250mm lenghth as per specific request

S


Plywood outside, plastic film in side;or as per request

Specification of tungsten plate/strip/foil:

Grade: w1, w-ni-fe, w-ni-cu
Standards: astm b760-2007
Thickness: 0.5-20mm
Width: <450mm
Length: <1500mm
Methods of processing: rolling
Supplying status: cold working (y), anneal (m)

Specification of molybdenum foil:

Grade: mo1, mo2, mo360, mo361, mo365
Standards: astm b386-2003
Thickness: 0.05-0.13mm
Width: 110mm
Methods of processing: rolling
Supplying status: cold working (y), anneal (m)

Titanium Plate Specification
1. Material: Gr. 1, Gr. 2, Gr. 3, GR4, GR5, Gr. 7, Gr. 9, Gr. 11, Gr. 12etc
2. Size: Thickness 0.5-60mm, Width<2800mm, Length<7000mm
3. Standards: AMS4911, ASTM B265, ASTMF67, F136, ASME B348, ASTM B381
4. Process method: Hot rolling/cold rolling, annealed
5. Surface: Polished, Pickling, Straight, Smooth Bright Finish, No Wrinkles, No Welding Spot or Welding Marks, No Dents etc.
6. Packing: Exportcase
7. MOQ: 50kg(sample can offered freely)
8. MTC: Available
9. PaymentTerm: T/T, L/C, Western Union

We can offer titanium plate with GR1, GR2, GR5, GR7, GR9 and if you have any nees, you can let me know.

Hot rolling, cold rolling.

1000*2000.

Titanium and titanium alloy plate
Specification: ASTM B265, ASTM F67, ASTM F136, AMS & MIL
Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr10, Gr11, Gr12
Condition: R & M
Dimension (mm):
Thickness (0.4-0.7) * Width 700 * Length 2100
Thickness (0.8-4.0) * Width 1200 * Length 3500
Thickness (5.0-50) * Width 1500 * Length 4000
Thickness (60-120) * Width 1500 * Length 3000.

Material : TA2,TA3,Gr2,Gr3
Use: Medical
Size: 0.5*(300-500)*(1000-2000)mm
Tolerance: +/-0.03


Woodencase or as customer's requirement.

C.P.Ti,Ti-6Al-4V, Ti-6Al-4V ELI.Ti-6242,Ti-15333,Ti-3Al-2.5V,Ti-0.2Pd,Ti-38644 and Ti-0.3Mo-0.8Ni etc. according to ASTM, AMS,ASME,MIL,DMS,JIS specification respectively.


Thickness(mm) Width(mm) Length(mm) Deliver Condition
0.6-<0.8 600max.,Ti-6Al-4v 2000max Pickled
800max.,C.P.Ti
0.8-<50 1000max 3048max Pickled
5.0-<8.0 2000max 4000max Sand-blasted
8.0-<50.0 2500max 5000max.Ti-6Al-4V Sand-blasted
7000max.,C.P.Ti .

Titanium plate